SOLICITATION NOTICE
A -- Fabrication of CMC Preforms and Mini Composites Requester
- Notice Date
- 9/7/2016
- Notice Type
- Presolicitation
- NAICS
- 541712
— Research and Development in the Physical, Engineering, and Life Sciences (except Biotechnology)
- Contracting Office
- NASA/Glenn Research Center, 21000 Brookpark Road, Cleveland, Ohio, 44135
- ZIP Code
- 44135
- Solicitation Number
- NNC16600107Q
- Archive Date
- 9/15/2016
- Point of Contact
- Jason Siewert, Phone: 2164332916
- E-Mail Address
-
jason.r.siewert@nasa.gov
(jason.r.siewert@nasa.gov)
- Small Business Set-Aside
- N/A
- Description
- GRC placed sole-source Purchase Order NNC15MF87P with University of Connecticut in September, 2015, and the work was recently completed. As a result of that work, the vendor demonstrated the Chemical Vapor Infiltration capability that NASA needs for fabrication of Ceramic Matrix Composites. It is therefore in the best interest of the Government to again conduct this procurement on a sole-source basis with the University of Connecticut, which will allow NASA GRC to use the processing capability they have to conduct research that will advance the capabilities of these high temperature aircraft engine materials. Fabrication of CMC Preforms and Mini-Composites by Chemical Vapor Infiltration Statement of Work Use CVI reactor to conduct the following tasks: 1. Fabricate thirty six (36) "mini-composites" of 6-inch length by Chemical Vapor Infiltration of Super Sylramic-iBN fiber tows to be provided by NASA. 2. Fabricate thirty six (36) "mini-composites" of 6-inch length by Chemical Vapor Infiltration of Hi-Nicalon-S fiber tows to be provided by NASA. 3. Fabricate five (5) SiC/SiC composite preforms (each of approximate dimension 6x6 inches) by infiltrating 2-D Sylramic-iBN fiber cloth with BN and SiC by Chemical Vapor Infiltration. Assumptions: • NASA will provide: - Super Sylramic-iBN fiber tows for Task 1 - Hi-Nicalon-S fiber tows for Task 2 - Sylramic-iBN fiber cloth for Task 3 • For all tasks, the CVI process will include an initial 0.5-µm BN fiber coating, followed by SiC infiltration of the BN-coated tow or cloth • The objective for mini-composite infiltration (Tasks 1 and 2) is less than 10% porosity • The objective for composite preform infiltration (Task 3) is 30% open porosity (volume %)
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/NASA/GRC/OPDC20220/NNC16600107Q/listing.html)
- Record
- SN04260870-W 20160909/160908000144-7cb73ca8b2e42fe79d9e43d29208f52b (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |