Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF SEPTEMBER 14, 2016 FBO #5409
MODIFICATION

49 -- P-8A Support Equipment

Notice Date

9/12/2016
 

Notice Type

Modification/Amendment
 

Contracting Office

Hwy 547, Lakehurst, NJ 08733
 

ZIP Code

08733
 

Solicitation Number

N68335-16-R-0348
 

Response Due

9/13/2016
 

Archive Date

3/12/2017
 

Point of Contact

Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
 

E-Mail Address

Clientservices@fedbid.com;
 

Small Business Set-Aside

N/A
 

Description

AMENDMENT NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is N68335-16-R-0348 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-89-1. The associated North American Industrial Classification System (NAICS) code for this procurement is 336413 with a small business size standard of 1,000.00 employees.This requirement is unrestricted and only qualified offerors may submit quotes.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2016-09-13 15:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Lakehurst, NJ 08733 The NAWC-AD Lakehurst requires the following items, Meet or Exceed, to the following: LI 001: 01-351-6869F72951-1 *WATER MANOMETER, SAFETY RELIEF, 2, EA; LI 002: 01-543-7570A71015-108LIFT FIXTURE - ENGINE ACCESSORY, 4, EA; LI 003: 01-513-6831B71040-39SLING, INLET COWL, 2, EA; LI 004: 01-468-8880C07005-1FITTING,ASSY AIRCRAFT TIEDOWN, 2, EA; LI 005: 01-468-5830C12002-7SURGE TANK SUMP HOSE, 4, EA; LI 006: LL-ERG-4530C26007-72COMPARTMENT OVERHEAT DETECTION,, 2, EA; LI 007: 01-469-6247C27022-1SET,CLAMP TRAILING EDGE FLAP TORQU, 4, EA; LI 008: 01-587-0549C27047-41SET,LOCK FLIGHT SPOILER ACTUATOR, 4, EA; LI 009: 01-617-6835A20001-152LIFT FIXTURE, BOOM HOIST, 2, EA; LI 010: 01-581-8715A27092-106SWITCH,PROXIMITY, 2, EA; LI 011: 01-469-6253A32075-10ADAPTER,ANTISKID TRANSDUCER, 2, EA; LI 012: 01-469-6225A49002-2ADAPTER,HOIST APU, 2, EA; LI 013: 01-640-8109C28014-1TEST EQUIPMENT,ENGINE FUEL FEED M, 2, EA; LI 014: 01-471-0203B78009-26LOCK EQUIPMENT,T/R, 4, EA; LI 015: 01-620-4677C36001-64FIXTURE,ENGINE BLEED AIR SYSTEMS, 4, EA; LI 016: 01-604-7415C27001-51SET,LOCK OUTBOARD GROUND SPOILER, 4, EA; LI 017: 01-473-8000C71022-6SET,TORQUE WRENCH, 4, EA; LI 018: 01-473-6694C71024-10SLING ASSY,AFT ENGINE MOUNT, 2, EA; LI 019: 01-492-4560C78019-15HOLD OPEN EQUIPMENT,T/R COWL, 4, EA; LI 020: 01-471-6723C78021-1HOLD OPEN EQUIPMENT, 65 DEG T/R CO, 4, EA; LI 021: 01-469-2287F72719-500EYEBOLT, MLG TOWING, 4, EA; LI 022: 01-590-0032C32023-12WRENCH, MLG FORWARD TRUNNION BE, 2, EA; LI 023: 01-581-7128C32028-111R/I ASSY,MLG WALKING BEAM ASY, 2, EA; LI 024: 01-608-2320C32029-45SET, PIN INSTALL/REMOVAL - MLG, 2, EA; LI 025: 01-469-8432C32030-10STRAP,RETENTION-INNER CYL,MLG AND, 4, EA; LI 026: 01-601-6198C32048-1ADAPTER ASSEMBLY, UPLOCK, MLG, 2, EA; LI 027: 01-473-3563C49004-40SLING,APU, 2, EA; LI 028: 01-624-9376C49007-42HOIST ASSEMBLY, APU, 2, EA; LI 029: 01-581-7533G28005-35FIXT,TEST SURGE TANK PRESSURE REL, 2, EA; LI 030: 01-544-2110C71020-91BOOTSTRAP EQUIPMENT,CFM 56-7, 2, EA; LI 031: 01-618-3362J20002-59LOAD POSITIONER, 4, EA; LI 032: 01-633-8592C71026-8SLING ASSY,CFM56-7 FAN COWL, 2, EA; LI 033: 01-610-1765C78009-72REM/INSTALL TOOL,EXHAUST NOZZLE &, 2, EA; LI 034: 01-511-0091C78011-37DOLLY & HYDRAULIC EQUIPMENT, 2, EA; LI 035: 01-605-5693C78018-50SLING EQUIPMENT,T/R CFM56-7, 2, EA; LI 036: 01-471-0185C78023-1LOCK ASSEMBLY,T/R ACTUATOR, 4, EA; LI 037: 01-469-7153C07004-1AFT JACK ADAPTER, 2, EA; LI 038: 01-622-2660C21006-7DEACTIVATION TOOL, CHECK VALVE, 1, EA; LI 039: 01-581-7198C32035-1PIN, INSERTER AND REMOVER, 1, EA; LI 040: LL-W75-F241B78006-7RIGGING BAR, T/R, 2, EA; LI 041: 01-604-0923C07007-19ADAPTER, FORWARD BODY JACK, 2, EA; LI 042: 01-573-2962C10002-9FITTING,NOSE MOORING, 7, EA; LI 043: 01-469-9572C27008-22SET,LOCK FLAP ACTUATION, 2, EA; LI 044: 01-580-9282C27051-29SET,LOCK FLAP/SLAT, 4, EA; LI 045: 01-603-3447C32051-1SET,GAGE HYDRAULIC BRAKE SYSTEM, 2, EA; LI 046: 01-581-8176C35001-6TEST SET, PRESSURE LEAK, CREW OXYG, 2, EA; LI 047: 01-472-4131C78020-14LATCHNG TOOL,THRUST REVERSER C-D, 2, EA; LI 048: 01-619-7618F70200-18INFLATION TOOL - STRUT, 3, EA; LI 049: 01-469-7160F70207-109SET, RIGGING PIN, 2, EA; LI 050: 01-588-9961F70207-128SET, RIGGING PINS, 2, EA; LI 051: 01-470-1448B52004-1INSTALLATION TOOL,DOOR SEAL, 2, EA; LI 052: 00-411-5625F71336-501LOCK, AIRCRAFT GROUND, 2, EA; LI 053: LL-W75-F310F80049-65LOCK,GROUND,FLT CONTROLS, 8, EA; LI 054: 01-590-5364F80239-21SAFETY, LANYARD, 3, EA; LI 055: 01-618-5495J22001-1TOOL SET, AUTO THROTTLE SERVO ASS, 1, EA; LI 056: 01-581-8682J34002-19INDICATOR,ANGLE OF ATTACK, 2, EA; LI 057: 01-469-6211C07002-1WING JACK ADAPTER, 2, EA; LI 058: 01-633-6182C22005-32CABLE ASSY, BREAKOUT BOX, 1, EA; LI 059: 00-571-3572F71267WRENCH ASSY, PINION GEAR, 1, EA; LI 060: 01-641-7822C49009-1TOOL SET,AUXILIARY POWER UNIT DELE, 1, EA; LI 061: 01-580-6927C22005-25CABLE ASSEMBLY, BREAKOUT BOX, 1, EA; LI 062: 01-610-4818ST9501BPIN, ALIGNMENT, BOLT INSTALLATION, 1, EA; LI 063: 01-469-1759C26005-1TEST BOX,APU/ENGINE FIRE EXTINGUISH, 2, EA; LI 064: 01-580-9111C27038-6PIN,LOCKOUT DEPRESSURIZATION VALV, 7, EA; LI 065: 01-632-1186C32022-23SET,THREAD PROTECTOR MLG, 4, EA; LI 066: 00-422-4139F80049-66LOCK,GROUND TE FLAP BYPASS VALVE, 2, EA; LI 067: 01-472-6224A10002-7COVER INSTALL/REMOVE POLE, 2, EA; LI 068: 01-581-6170C32022-20SET,THREAD PROTECTOR NLG, 4, EA; LI 069: 00-165-2401F70038WRENCH ASSY - DOOR HANDL MECHAN, 1, EA; LI 070: 01-468-8745F72942-1DOOR LUBE SET, 2, EA; LI 071: 01-469-1758F80055-10ASSEMBLY,TRAMMEL BAR STAB TRIM AC, 1, EA; LI 072: 01-469-8478F80166-1FIXTURE,TEST FUEL SURGE PRESSURE, 1, EA; LI 073: 01-020-8475SE27-0001CONTROL WHEEL STRAIGHT EDGE, 1, EA; LI 074: 01-471-0194F72928-58REGULATOR,AIR PRESSURE ELEV FEEL, 2, EA; LI 075: 01-581-6301C22005-22BREAKOUT BOX ASSEMBLY, 1, EA; LI 076: 01-469-8474C27057-1LOCK,RUDDER PCU, 1, EA; LI 077: LL-W75-F226C32032-98PULLER, AXLE/BRAKE SLEEVE, MLG, 2, EA; LI 078: 01-470-5394C38002-1 PLUG ASSY, SKIN FITTING,DOOR SILL DR, 2, EA; LI 079: 01-581-7561J32037-106SET, REMOVAL/INSTL, MLG AND NLG SPR, 1, EA; LI 080: 01-580-9431C32012-12SET,TOOL MLG+NLG WHEEL RET NUT, 4, EA; LI 081: 01-469-6413F80063-501Fixture- Elevator Rigging and Restraining, 1, EA; LI 082: 01-580-9383B27064-1TORQUE EQUIP,RUDDER PEDAL ADJUST, 2, EA; LI 083: 01-469-8435B28003-1PULLER,BOOST PUMP,MAIN TANK, 2, EA; LI 084: 01-469-9575B28009-1TOOL,ALIGNMENT FUEL SHUTOFF VALVE, 2, EA; LI 085: 01-469-2290C07006-16FIXTURE, TETHERING REAR VERTICAL F, 2, EA; LI 086: 01-517-1784C12001-38ENGINE RUN-UP GUARD, 4, EA; LI 087: 01-616-4864C21003-155SET, BACKFLUSH EQUIPMENT HEAT EXC, 2, EA; LI 088: 01-492-4566C27007-31TEST BOX,CUTOUT SWITCH, 2, EA; LI 089: 01-473-2403C27034-1SLING EQUIP,ELEVATOR, 2, EA; LI 090: 01-544-2116C27035-20SLING EQUIP,RUDDER, 2, EA; LI 091: 01-469-6250C27042-1WRENCH,TORQUE PCU RUDDER, 2, EA; LI 092: 01-469-6355C27045-1SET,RIGGING LE SLAT, 2, EA; LI 093: 01-492-3520C27052-39SLING, TRAINING EDGE FLAP, 2, EA; LI 094: 01-470-1449C27055-1SLING,AILERON, 2, EA; LI 095: LL-W75-F348C27056-35SLING EQUIPMENT,LEADING EDGES SLA, 2, EA; LI 096: 01-469-8470A20005-9CLAMP CONTROL CABLE, 4, EA; LI 097: 01-469-8479A25020-8GAGE,SEAT TRACK WEAR, 2, EA; LI 098: 01-469-6348C27064-1ADAPTER,TORQUE WRENCH,STABIL TRIM, 2, EA; LI 099: 01-587-0554C27078-1ADAPTER, MEASUREMENT, STAB SYSTE, 2, EA; LI 100: LL-ERG-4931C27082-1PUSHROD LENGTH ADJUST ELEVATOR TAB/AILER, 2, EA; LI 101: 01-471-0173B28001-18ADAPTER,SUMP DRAIN VALVE, 2, EA; LI 102: 01-580-6901C29002-17TEST BOX, RUDDER PCU, 2, EA; LI 103: 01-469-8436C32014-1EXTENDER,SPRING MLG/NLG DOWNLOCK, 2, EA; LI 104: 01-604-0960C32016-46REMOVE/INSTALL EQUIP,NLG LOWER SE, 2, EA; LI 105: 01-469-6331C32021-1WRENCH SET,ANTI-SKID TRANSDUCER, 2, EA; LI 106: 01-469-6259C32031-22REMOV.INSTALL,AFT TRUNION PIN ASSY, 2, EA; LI 107: 01-469-6255C32033-1R/I EQUIP, NLG TRUNION PIN, 2, EA; LI 108: 01-590-3745C32049-1OUTRIGGER ASSY - NLG R/I, 2, EA; LI 109: LL-W75-F397C26004-73SET,TEST ENG FIRE EXTINGUISHING SYS, 2, EA; LI 110: 01-473-9498C49006-1PROTECTOR,THREAD-APU MOUNT BOLT, 2, EA; LI 111: 01-473-3560C49010-50CRADLE ASSEMBLY,APU, 2, EA; LI 112: 01-585-2499C49011-1TEST SET,FUEL FEED, AUXILIARY POWER, 2, EA; LI 113: 01-469-9577C52008-1ADAPTER,TORQUE WRENCH, 2, EA; LI 114: 01-581-7120C52013-1SLING, TRANSPORTATON, FORWARD AIR, 2, EA; LI 115: 01-588-7037C55010-33SLING EQUIP-VERTICAL FIN, 2, EA; LI 116: 01-580-6907C27046-13SET,LOCK GROUND SPOILER, 2, EA; LI 117: 01-580-9376C27049-36SET,TOOL RUDDER PCU, 2, EA; LI 118: 01-471-2276C27060-1ADAPTER,CONTROL WHEEL, 2, EA; LI 119: 01-390-3523F70300-1ADAPTER,FLAP DRIVE, 2, EA; LI 120: 01-469-8434F70336-1WRENCH, SPANNER, 2, EA; LI 121: 00-691-2989F71329TEST DEVICE, INTEGRAL TANK, 2, EA; LI 122: 01-588-9963C27083-1 Rigging Bar, elevator tab, 2, EA; LI 123: 01-472-4135F72950-158DOLLY, TRANSPORTATION, 2, EA; LI 124: 01-469-6335C32013-1ADAPT,TORQUE WRENCH MLG AFT BEAR, 4, EA; LI 125: 01-581-8696F72959-40WRENCH, SPANNER, 2, EA; LI 126: 01-582-9848F80027-18LOCK ASSEMBLY, HORIZONTAL STABILIZ, 2, EA; LI 127: 01-618-3361C32017-53TOOL,LOWER BEARING SEALS REPLACE, 2, EA; LI 128: 01-471-2286F80033-8ADAPTER,WRENCH HOOK-SPANNER, 2, EA; LI 129: 01-492-3516C32025-7WRENCH-SPANNER,GLAND NUT NLG, 2, EA; LI 130: 01-469-8473F80153-1PIN,SAFETY ELEVATOR FEEL COMPUTER, 2, EA; LI 131: 01-469-6232F80197-5WRENCH SET,FLAP LIMIT SWITCHES, 2, EA; LI 132: 01-581-8711F80212-30ADAPTER,FORCE CHECK,RUDDER PEDA, 2, EA; LI 133: 01-468-4663F80229-20ADAPTER, CABLE ASSY, FIREX, 2, EA; LI 134: 01-469-1772F80229-48ADAPTER, CABLE ASSY, FIREX, 2, EA; LI 135: 01-469-6229F80229-52PLUG,SHORTING, 2, EA; LI 136: 01-469-7157F80229-59ADAPTER,CABLE, 2, EA; LI 137: 01-469-7163F80229-61ADAPTER,CABLE, 2, EA; LI 138: 01-581-8678F80229-69ADAPTER, CABLE ASSY, FIREX, 2, EA; LI 139: 01-588-7041F80241-16RESTRAINT,DOORS, 2, EA; LI 140: 01-492-4561C78025-21ACTUATOR INSTALLATION/REMOVAL TOO, 2, EA; LI 141: 01-470-5395F72917-19TESTER,GROUND FAULT PROTECTION S, 2, EA; LI 142: 01-471-9613C71027-1FRAME,INLET COWL R/I, 2, EA; LI 143: LL-W75-F250C21005-70ADAPTER, JACK AC PAK, 2, EA; LI 144: 01-590-2578C32034-227DOLLY,MLG REMOVAL/INSTALLATION, 4, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, NAWC-AD Lakehurst intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. NAWC-AD Lakehurst is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time quotes.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a quote on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplement with the additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number is N68335-16-R-0348 and is being issued as a Request for Proposals. This Request for Proposal is being issued on a limited competition basis. All contractors seeking award must be a small business authorized by Boeing to manufacture the parts listed below. In order to qualify for award, contractors must provide substantiating documentation that validates their company as an authorized manufacturer of the PSE listed below. All contractors seeking award must provide a valid license agreement between the contractor and Boeing which authorizes the contractor to manufacture the equipment listed in the solicitation. Omission of this information will result in becoming ineligible for award. The Offeror is expected to comply with all requirements of the RFP. The Government advises the Offeror that taking exception or deviating from any term or condition of the RFP may make an offer unacceptable, and the proposal unawardable, unless the RFP expressly authorizes such an exception or deviation with regard to that specific term or condition. Substantiating Documentation: Offerors must include substantiating documentation that validates their company as an authorized manufacturer of the equipment. All offerors seeking award must provide a valid license agreement between the contractor and Boeing which authorizes the contractor to manufacture the equipment listed in the solicitation. Failure to include this information will result in the offer being unacceptable for award. Award will be made to that responsible offeror who provides substantiating documentation that validates their company as a small business authorized manufacturer of the PSE and proposes the total lowest price for supplies or services meeting the requirements of the solicitation. Proposals that do not conform to the requirements of the solicitation may be rejected without further evaluation, deliberation or discussion. The low priced offer conforming to the request for proposal submitted by a responsible offeror will be awarded the contract. For competitive evaluation purposes, the evaluated price for this procurement will be based on a sum of all solicitation CLINs. All CLINs will be included in the total evaluated price. Each offeror?s price/cost proposal shall be evaluated to determine if it is complete. The Government may elect not to award to and/or open discussions with an offeror whose prices appear materially unbalanced. An offer is materially unbalanced when it is based on prices significantly overstated for some CLINs and/or significantly understated for other CLINs. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 150 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) in order to be considered for award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Registration must be "ACTIVE" at the time of award. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.203-6 Alt 1, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34, 52.233-3, 52.233-4. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. The following DFARS provisions and clauses apply to this procurement: DFARS 252.203-7000, 252.203-7005, 252.204-7003, 252.204-7012, 252.209-7001, 252.211-7003, 252.215-7008, 252.225-7009, 252.232-7003, 252.232-7010, 252.225-7036, 252.243-7002, 252.244-7000, 252.247-7022, 252.247-7023. The full text of the referenced DFARS clauses may be accessed electronically at http://farsite.hill.af.mil/vfdfara.htm. Berry Amendment Requirement: DFARS 252.225-7012 Preference for Certain Domestic Commodities and 252.225-7015 Restriction on Acquistion of Hand or Measuring Tools are applicable to this acquisition. All hand tools are to be made in the USA. Should there be any items/tools listed that do not comply, the offeror shall advise. For the Buy American, the following clauses apply: 252.225-7001 Buy American And Balance Of Payments Program; 252.225-7000 Buy American--Balance of Payments Program Certificate.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVAIR/N68335/N68335-16-R-0348/listing.html)
 

Place of Performance

Address: Lakehurst, NJ 08733

Zip Code: 08733
 

Record

SN04266824-W 20160914/160912234947-1ce4532f1b1d398e311018a2c16d3535 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |