SOURCES SOUGHT
84 -- Explosive Handlers Coveralls - Market Research Survey
- Notice Date
- 9/29/2016
- Notice Type
- Sources Sought
- NAICS
- 314999
— All Other Miscellaneous Textile Product Mills
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Troop Support - Clothing & Textiles, 700 Robbins Avenue, Philadelphia, Pennsylvania, 19111-5096, United States
- ZIP Code
- 19111-5096
- Solicitation Number
- SPE1C1-17-R-XXXX
- Archive Date
- 10/28/2016
- Point of Contact
- Donald Howarth,
- E-Mail Address
-
donald.howarth@dla.mil
(donald.howarth@dla.mil)
- Small Business Set-Aside
- N/A
- Description
- Market Research Survey, Coveralls Explosive Handlers Please fill out and return the attached survery for the item below. (Coveralls, Explosive Handlers (PGC 00465)) NSN(S) THIS PROCUREMENT Size NSN UPC X-SMALL 8415-00-280-2455 718020342535 SMALL 8415-00-279-8719 718020342498 MEDIUM 8415-00-279-8720 718020342504 LARGE 8415-00-279-8721 718020342511 X-LARGE 8415-00-279-8722 718020342528 COVERALLS, EXPLOSIVE HANDLER'S. Coveralls, Explosive Handlers, Flame Resistant shall be made in accordance with NCTRF PD 14610J dated February 20, 2009. Pattern date: 7 July 2008 MIL-DTL-32075: LABEL FOR CLOTHING, EQUIPAGE, AND TENTAGE, GENERAL USE REPLACES DDD-L-20 (Ref. T0451 - June 19, 2007) INTERIM SPECIFICATION CHANGES TO MIL-DTL-32075: PAGE 4, PARA. 3.3.5, AFTER "TYPE III OR IV, CLASS 4 OF" DELETE "DDD-L-20" AND REPLACE "MIL-DTL-32075,". PAGE 6, TABLE I, "PHYSICAL REQUIREMENTS OF THE TYPE VI FINISHED LABEL." UNDER "TEARING STRENGTH" DELETE: "(LB.) MINIMUM" AND SUBSTITUTE: "(GNS) MINIMUM." PAGE 12, PARA 3.3.2.17, AFTER "NSN" ADD "AND THE UNIVERSAL PRODUCT CODE (UPC) SUPPLIED BY THE GOVERNMENT, FOR ALL NSNs." INTERIM CHANGES TO A-A-55126B, THE FOLLOWING CHANGES ARE FOR ALL CURRENT, PENDING AND FUTURE PROCUREMENTS OF THE SUBJECT DOCUMENT UNTIL SUCH TIME AS THE DOCUMENT IS AMENDED OR REVISED. PAGE 4. TABLE I, PHYSICAL REQUIREMENTS, CHARACTERISTIC, SHEAR STRENGTH,DELETE LBS/SQ INCH (MIN), ADD SHEAR STRENGTH, LBS/2 SQ INCH (MIN). PAGE 5 TABLE II, PHYSICAL REQUIREMENTS; CHARACTERISTIC, LENGTH DIMENSIONAL STABILITY, % (MAX); LOOP, ALL CLASSES DELETE.0; ADD ALL CLASSES 4.0. PAGE 7, Paragraph 3.10.2, Change the following title of paragraph from: "Fray resistance of Universal Camouflage Shades" and replace with "Fray resistance of Camouflage Prints" PAGE 14, Paragraph 7.3.4 Change the following title of paragraph from: Fray resistance for Universal Camouflage Shades." and replace with "Fray resistance for Camouflage Prints." INCLUDE T6855 OBJECT TEXT ID ST ADDITIONAL INFORMATION FOR MIL-C-43122:. INTERIM SPECIFICATION CHANGES TO MIL-C- 43122G:. PAGE 11 TABLE II, ACROSS FROM SHRINKAGE, UNDER TEST METHOD: DELETE "5530" AND SUBSTITUTE "5550". MIL-STD-147 IS HEREBY REINSTATED AS FOLLOWS: MIL-STD-147E DEPARTMENT OF DEFENSE 16 MAY 2008 STANDARD PRACTICE PALLETIZED UNIT LOADS STANDARDS (COMMERCIAL) ASME-MH1 American Society of Mechanical Engineers (ASME) Pallets, Slip Sheets, and Other Bases For Unit Loads, for construction of pallets. ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4: NOTE: THE MOST RECENT VERSION OF THIS DOCUMENT SHOULD BE USED. APPLICATION FOR COPIES SHOULD BE ADDRESSED TO: AMERICAN SOCIETY FOR QUALITY 600 NORTH PLANKINTON AVENUE MILWAUKEE, WISCONSIN 53203 (Ref. T0795 - May 17, 2006) ADDITIONAL INFORMATION FOR COMMERCIAL AQL'S: AQL'S FOR COMMERCIAL ITEM DESCRIPTIONS (CID'S): VISUAL - GENERAL INSPECTION LEVEL II, AQL - 1.0 DIMENSIONAL - SPECIAL INSPECTION LEVEL S-2, AQL - 2.5 ACCEPTABILITY OF LOTS WILL BE DETERMINED BY THE USE OF "SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES", ANSI/ASQC Z1.4 PACKAGING Case lot quantity is 15 coveralls preserved as follows: As a minimum item shall be packed in a snug fitting fiberboard shipping container conforming to ASTM-D-5118, Type CF, Style RSC, Grade 275, variety SW, Class domestic, with a double wall liner. Any commercial closure method cited in ASTM-D-1974 is acceptable except stapling. Packaging shall be as per ASTM-D-3951, MIL-STD-129 with change notice 4, MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DSCP-4155.3 MIL-STD-129R - DEPARTMENT OF DEFENSE STANDARD PRACTICE - MILITARY MARKING FOR SHIPMENT AND STORAGE DATED 18 FEBRUARY 2014 INTERIM CHANGES: OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE: THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA TROOP SUPPORT C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT. IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE" SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER. THE PRESERVATION,PACKAGING,PACKING AND MARKING, FOR THIS ITEM,EQUIPMENT OR SUPPLIES,SHALL BE ACCOMPLISHED UNDER THE REQUIREMENTS OF THE LATEST REVISION OF ASTM-D-3951. Packaging examination. The fully packaged end item shall be examined for the defects listed below. The lot size shall be expressed in units of shipping containers. The sample unit shall be one shipping container fully packaged. The Inspection level shall be S-2 and the AQL, expressed in terms of defects per hundred units, shall be 2.5. Examine Defect Marking Omitted; incorrect; illegible, of (exterior) improper size, location, sequence & Unit Pack, or method of application. Materials Any component missing, damaged or not as specified. Workmanship Inadequate application of components, such as: incomplete closure of container flaps, loose strapping, improper taping, or inadequate stapling. Bulged or distorted container. Contents Number of intermediate containers per shipping container is more or less than required. Number of items per container is more or less than required. Palletization examination. The fully packaged and palletized end items shall be examined for the defects listed below. The lot size shall be expressed in units of palletized unit loads. The sample unit shall be one palletized unit load, fully packaged. The Inspection level shall be S-1 and the AQL, expressed in terms of defects per hundred units, shall be 6.5. Examine Defect Finished Length, width or height exceeds Dimensions specified maximum requirement. Palleti- Pallet pattern not as specified. zation Interlocking of loads not as specified. Load not bonded with required straps as specified. Weight Exceeds maximum load limits. Marking Omitted; incorrect; illegible; of improper size, location, sequence or method of appli- cation.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCP-C/SPE1C1-17-R-XXXX/listing.html)
- Record
- SN04292706-W 20161001/160929235132-acc237465486fe5a3b54d8b9dad77df0 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |