Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF OCTOBER 21, 2016 FBO #5446
SOLICITATION NOTICE

65 -- Wound_Drains - IA FBO Worksheet

Notice Date

10/19/2016
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

339113 — Surgical Appliance and Supplies Manufacturing
 

Contracting Office

Defense Logistics Agency, DLA Acquisition Locations, DLA Troop Support - Medical, 700 Robbins Avenue, Philadelphia, Pennsylvania, 19111-5096, United States
 

ZIP Code

19111-5096
 

Solicitation Number

IAS-1609-09
 

Point of Contact

Mr. David V. Sheaffer, Phone: 210-536-6075, Mr. Jim Quinn, Phone: 210-292-3295
 

E-Mail Address

david.v.sheaffer.ctr@mail.mil, james.e.quinn28.ctr@mail.mil
(david.v.sheaffer.ctr@mail.mil, james.e.quinn28.ctr@mail.mil)
 

Small Business Set-Aside

N/A
 

Description

Complete pricing offer and vendor information must be submitted in full to the MMESO POCs by the response date of this Sources Sought Notification. Vendors not currently on the QSL for the product line will not be considered for IA. Vendor pricing and packaging MUST match those that were submitted and qualified to the QSL. Use these instructions to complete the IA FBO Package Worksheet. Vendors who are not selected will be notified in writing upon issuance of an IA. The Defense Health Agency (DHA) Medical Logistics (MEDLOG) Division Medical Materiel Enterprise Standardization Office (MMESO) and the Defense Logistics Agency (DLA) Troop Support Medical Prime Vendor (PV) Program announce a Standardization Action (SA) for the standardization of Wound Drains. Only those vendors on the Qualified Suppliers List (QSL) MS-1504-14 _Wound Drains are eligible for participation. The MMESO South is the lead MMESO for this project. These Wound Drains products are for purchase by the Military Treatment Facilities (MTFs) of the Military Health System (MHS) and for the operational assemblages of the Army, Navy, Air Force, Marine Corps, and Naval Expeditionary Medical Support Command (NEMSCOM) and managed regionally by MMESOs North, South, West, Pacific and Europe, hereafter referred to as MMESOs. The Incentive Agreement (IA) resulting from this Sources Sought Notification is a supplement to the Prime Vendor (PV) Program and is not a contract. For additional information regarding DLA Troop Support Medical's PV program please access the web site at https://www.medical.dla.mil/. This Sources Sought Notification is intended to solicit pricing quotes from vendors who are on the QSL MS-1504-14_Wound_Drains. The pricing that is provided must be discounted from Distribution and Pricing Agreement (DAPA) prices or proposed DAPA prices. Vendors who are currently qualified for the QSL must meet the requirements below. The resulting IA will be for a base period of three (3) years (36 months) from date of selection, with one (1) 24-month "option" period not to exceed a total of 5 years. Anticipated selection date is December 2016. Among vendors who are on QSL MS-1504-14_Wound_Drains, best price will determine selection. It is intended that the selected vendor(s) for this IA will support the enterprise goal of medical materiel standardization that combines operational and institutional requirements. The government is seeking a single vendor selection for an IA. The government reserves the right to standardize or not standardize on Wound Drains. A. Products & Performance Required The MMESOs are seeking product line items in the category of Wound Drains. The total estimated enterprise-wide annual demand for this product line is approximately $664,571 based on Medical Product Data Bank (MedPDB) usage data over a recent 12-month period. The usage data represents requirements for the Army, Navy, and Air Force Institutional MTFs, along with operational assemblages in the Department of Defense (DoD). The specifications for this project are shown in Requirements below. B. Instructions to Vendors Vendors on QSL MS-1504-14_Wound_Drains who are interested in participating in the Standardization Action for an IA must provide a response to this Sources Sought Notification via e-mail to the MMESO POCs below. In addition to the offered pricing as specified, please include the following information: (1) Company name and address; (2) Company POC (Name and Phone Number, Fax Number, and E-mail address); (3) Commercial and Government Entity (CAGE) Code; and (4) Identification of the Sources Sought notification to which the vendor is responding. Due to the potential for email to be lost in transmission, from network security, etc., vendors are strongly encouraged to confirm with the MMESO Pacific that the submission and quote were received by the MMESO Pacific via email, allowing adequate time for resubmission before the due date and time should a problem occur with the first submission. Vendor must complete and submit the IA FBO Package Worksheet. A vendor who cannot open the IA FBO Package Worksheet may contact either of the MMESO POCs below and a copy will be provided via an alternate method (fax, e-mail, or hard copy). Vendors that do not meet the deadline of COB 5:00 PM Central Standard Time (CST) on the date listed for closing, per the FBO Sources Sought notification, will not be eligible for participation in the Standardization Action for an Incentive Agreement. C. Source Selection Procedures Pricing analysis of required items will occur for those vendors who have been previously qualified for the QSL. Price will be evaluated based on unit price multiplied by number of estimated units. Best overall price will be the determining factor in vendor selection for an Incentive Agreement for Standardization. Quotes should contain the vendor's best discounts off of the vendor's DAPA pricing. The Government intends to make a selection based on initial quotes but reserves the right to conduct discussions and request revised quotes, if determined necessary. Vendor Instructions for Pricing Submission The pricing requirements are outlined below. Complete pricing offer and vendor information must be submitted in full to the MMESO POCs by the response date of this Sources Sought Notification. Vendor part numbers, pricing and packaging MUST match those that were submitted and qualified to the subject QSL FBO. Vendors not currently on the subject QSL will not be considered for an IA. Use these instructions to complete the IA FBO Package Worksheet. Vendors who are not selected will be notified in writing upon issuance of an IA. 1.Vendor must submit the following information via IA FBO Package Worksheet for each QSL required item: Vendor Part Number (PN), Manufacturer PN, Manufacturer Name, Full Item Description, DAPA Number for Item, Unit of Measure (UOM), Quantity (QTY) in UOM, Unit of Inner Packaging (UOP), QTY of UOM in UOP, Unit of Sale (UOS), QTY of UOM in UOS, UOS Base Price, UOS Incentive Price, UOM Base Price and UOM Incentive Price. Required Products /Annual Usage in Units 1.WOUND DRAIN BULB RESERVOIR - 100 ML SILICONE /15,970 / 2.WOUND DRAIN TUBE SILICONE FLAT 10 MM 3/4 FLUTED /70 / 3.WOUND DRAIN TUBE SILICONE FLAT 10 MM FULL FLUTED /850 / 4.WOUND DRAIN TUBE SILICONE FLAT 10 MM FULL FLUTED AND TROCAR /770 / 5.WOUND DRAIN TUBE SILICONE FLAT 7 MM 3/4 FLUTED AND TROCAR /130 / 6.WOUND DRAIN TUBE SILICONE FLAT 7 MM FULL FLUTED /220 / 7.WOUND DRAIN TUBE SILICONE FLAT 7 MM FULL FLUTED AND TROCAR /390 / 8.WOUND DRAIN TUBE SILICONE ROUND 10FR FULL FLUTED AND TROCAR /340 / 9.WOUND DRAIN TUBE SILICONE ROUND 10FR FULL FLUTED HUBLESS AND TROCAR /826 / 10.WOUND DRAIN TUBE SILICONE ROUND 15FR FULL FLUTED HUBLESS /160 / 11.WOUND DRAIN TUBE SILICONE ROUND 15FR FULL FLUTED HUBLESS AND TROCAR /2,000 / 12.WOUND DRAIN TUBE SILICONE ROUND 19FR FULL FLUTED HUBLESS /110 / 13.WOUND DRAIN TUBE SILICONE ROUND 19FR FULL FLUTED HUBLESS AND TROCAR /560 / 14.WOUND DRAIN TUBE SILICONE ROUND 24FR FULL FLUTED HUBLESS /970 / 2.Vendor may provide any or all of the additional items listed below, following the same format as for requirement number 1. Pricing for these additional items will not be part of the pricing computation for vendor selection. All additions will be at the discretion of the Government. Item Description / 1.WOUND DRAIN BOTTLE EVACUATOR RESERVOIR - 400 ML SILICONE / 2.WOUND DRAIN BULB RESERVOIR - 400 ML SILICONE / 3.WOUND DRAIN KIT THREE SPRING ROUND RESERVOIR - 400 ML PVC WITH ROUND 1/4 INCH END PERFORATION TUBE AND TROCAR / 4.WOUND DRAIN KIT THREE SPRING ROUND RESERVOIR - 400 ML PVC WITH ROUND 1/8 INCH END PERFORATION TUBE AND TROCAR / 5.WOUND DRAIN KIT THREE SPRING ROUND RESERVOIR - 400 ML PVC WITH ROUND 10FR MID PERFORATION TUBE AND TROCAR / 6.WOUND DRAIN KIT THREE SPRING ROUND RESERVOIR - 400 ML PVC WITH ROUND 15FR MID PERFORATION TUBE AND TROCAR / 7.WOUND DRAIN KIT THREE SPRING ROUND RESERVOIR - 400 ML PVC WITH ROUND 19FR MID PERFORATION TUBE AND TROCAR / 8.WOUND DRAIN KIT THREE SPRING ROUND RESERVOIR - 400 ML PVC WITH ROUND 3/16 INCH END PERFORATION TUBE AND TROCAR / 9.WOUND DRAIN KIT THREE SPRING ROUND RESERVOIR - 400 ML PVC WITH ROUND 7FR MID PERFORATION TUBE AND TROCAR / 10.WOUND DRAIN KIT THREE SPRING ROUND RESERVOIR - 400 ML SILICONE WITH ROUND 10FR MID PERFORATION TUBE AND TROCAR / 11.WOUND DRAIN KIT THREE SPRING ROUND RESERVOIR - 400 ML SILICONE WITH ROUND 19FR MID PERFORATION TUBE AND TROCAR / 12.WOUND DRAIN KIT BOTTLE EVACUATOR RESERVOIR - 400 ML PVC WITH ROUND 1/8 INCH MID PERFORATION TUBE AND TROCAR / 13.WOUND DRAIN KIT BOTTLE EVACUATOR RESERVOIR - 400 ML PVC WITH ROUND 3/16 INCH END PERFORATION TUBE AND TROCAR / 14.WOUND DRAIN KIT BOTTLE EVACUATOR RESERVOIR - 400 ML SILICONE WITH ROUND 1/4 INCH END PERFORATION TUBE AND TROCAR / 15.WOUND DRAIN KIT BULB RESERVOIR - 100 ML SILICONE WITH FLAT 10 MM 3/4 PERFORATION HUBLESS TUBE / 16.WOUND DRAIN KIT BULB RESERVOIR - 100 ML SILICONE WITH FLAT 10 MM 3/4 PERFORATION TUBE / 17.WOUND DRAIN KIT BULB RESERVOIR - 100 ML SILICONE WITH FLAT 10 MM FULL PERFORATION HUBLESS TUBE / 18.WOUND DRAIN KIT BULB RESERVOIR - 100 ML SILICONE WITH FLAT 10 MM FULL PERFORATION HUBLESS TUBE AND TROCAR / 19.WOUND DRAIN KIT BULB RESERVOIR - 100 ML SILICONE WITH FLAT 10 MM FULL PERFORATION TUBE / 20.WOUND DRAIN KIT BULB RESERVOIR - 100 ML SILICONE WITH FLAT 7 MM FULL PERFORATION HUBLESS TUBE / 21.WOUND DRAIN KIT BULB RESERVOIR - 100 ML SILICONE WITH FLAT 7 MM FULL PERFORATION HUBLESS TUBE AND TROCAR / 22.WOUND DRAIN KIT BULB RESERVOIR - 100 ML SILICONE WITH FLAT 7 MM FULL PERFORATION TUBE / 23.WOUND DRAIN KIT BULB RESERVOIR - 100 ML SILICONE WITH ROUND 1/8 INCH END PERFORATION TUBE AND TROCAR / 24.WOUND DRAIN KIT BULB RESERVOIR - 400 ML SILICONE WITH ROUND 19FR END PERFORATION TUBE AND TROCAR / 25.WOUND DRAIN THREE SPRING ROUND RESERVOIR - 400 ML PVC / 26.WOUND DRAIN TUBE PVC ROUND 10FR CENTER PERFORATION AND TROCAR / 27.WOUND DRAIN TUBE SILICONE FLAT 10 MM 3/4 FLUTED AND TROCAR / 28.WOUND DRAIN TUBE SILICONE FLAT 10 MM 3/4 PERFORATION HUBLESS / 29.WOUND DRAIN TUBE SILICONE FLAT 10 MM FULL PERFORATION / 30.WOUND DRAIN TUBE SILICONE FLAT 10 MM FULL PERFORATION AND TROCAR / 31.WOUND DRAIN TUBE SILICONE FLAT 10 MM FULL PERFORATION HUBLESS / 32.WOUND DRAIN TUBE SILICONE FLAT 7 MM 3/4 FLUTED / 33.WOUND DRAIN TUBE SILICONE FLAT 7 MM 3/4 PERFORATION / 34.WOUND DRAIN TUBE SILICONE FLAT 7 MM 3/4 PERFORATION HUBLESS / 35.WOUND DRAIN TUBE SILICONE FLAT 7 MM FULL PERFORATION / 36.WOUND DRAIN TUBE SILICONE FLAT 7 MM FULL PERFORATION AND TROCAR / 37.WOUND DRAIN TUBE SILICONE FLAT 7 MM FULL PERFORATION HUBLESS / 38.WOUND DRAIN TUBE SILICONE ROUND 1/4 INCH END PERFORATION AND TROCAR / 39.WOUND DRAIN TUBE SILICONE ROUND 10FR 3/4 FLUTED AND TROCAR / 40.WOUND DRAIN TUBE SILICONE ROUND 10FR END PERFORATION / 41.WOUND DRAIN TUBE SILICONE ROUND 10FR END PERFORATION AND TROCAR / 42.WOUND DRAIN TUBE SILICONE ROUND 10FR FULL FLUTED HUBLESS / 43.WOUND DRAIN TUBE SILICONE ROUND 15FR 3/4 FLUTED / 44.WOUND DRAIN TUBE SILICONE ROUND 15FR 3/4 FLUTED AND TROCAR / 45.WOUND DRAIN TUBE SILICONE ROUND 15FR END PERFORATION / 46.WOUND DRAIN TUBE SILICONE ROUND 15FR END PERFORATION AND TROCAR / 47.WOUND DRAIN TUBE SILICONE ROUND 15FR FULL FLUTED AND TROCAR / 48.WOUND DRAIN TUBE SILICONE ROUND 15FR FULL FLUTED HUBLESS AND BENDABLE TROCAR / 49.WOUND DRAIN TUBE SILICONE ROUND 19FR 3/4 FLUTED / 50.WOUND DRAIN TUBE SILICONE ROUND 19FR 3/4 FLUTED AND TROCAR / 51.WOUND DRAIN TUBE SILICONE ROUND 19FR END PERFORATION / 52.WOUND DRAIN TUBE SILICONE ROUND 19FR FULL FLUTED HUBLESS AND BENDABLE TROCAR / 53.WOUND DRAIN TUBE SILICONE ROUND 28FR FULL FLUTED HUBLESS / 54.WOUND DRAIN TUBE SILICONE ROUND 3/16 INCH END PERFORATION / 55.WOUND DRAIN TUBE SILICONE ROUND 3/16 INCH END PERFORATION AND TROCAR / 56.WOUND DRAIN TUBE SILICONE ROUND 3/32 INCH END PERFORATION / 57.WOUND DRAIN TUBE SILICONE ROUND 32FR FULL FLUTED HUBLESS / 58.WOUND DRAIN TUBE SILICONE ROUND 7FR END PERFORATION / 59.WOUND DRAIN TUBE SILICONE ROUND 7FR END PERFORATION HUBLESS / 3.Vendor will be required to submit discounts off of DAPA for all products included in this standardization initiative. Where lower base uncommitted government prices are available, such as Federal Supply Schedule (FSS) prices, incentive tier is expected to be lower than such prices. This is because DAPAs, unlike other government prices, are base uncommitted. A vendor shall not quote base uncommitted prices such as FSS prices as the discounted tier price for purposes of this standardization initiative. Vendor must provide quotes on items provided in response to the technical/company requirements. Based on the good faith volume estimates provided, vendor agrees to give all designated MTFs and Operational Units incentive pricing throughout the life of this agreement in exchange for 80% commitment of purchases for the MHS in this product line. A vendor who does not provide discounts off DAPA in response to the IA FBO will not be considered for continued participation. Points of Contact (POCs): Mr. David Sheaffer, MMESO South Team Leader, david.v.sheaffer.ctr@mail.mil, or 210-536-6075 and Mr. Jim Quinn, MMESO South Clinical Analyst, james.e.quinn28.ctr@mail.mil, 210-536-6071. DLA Troop Support Medical Contracting Officer: Ms. Tara J. Perrien, tara.perrien@dla.mil 215-737-8307.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCP-M/IAS-1609-09/listing.html)
 

Place of Performance

Address: Medical Materiel Enterprise Standardization Offices (MMESO), 7800 IH-10 West, Suite 220, San Antonio, Texas, 78230-4768, United States

Zip Code: 78230-4768
 

Record

SN04308468-W 20161021/161019234648-ed12ea50c2b8c437f71c0b1d2e932738 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |