MODIFICATION
34 -- Milling Machine
- Notice Date
- 10/20/2016
- Notice Type
- Modification/Amendment
- NAICS
- 333517
— Machine Tool Manufacturing
- Contracting Office
- Department of the Navy, Naval Air Systems Command, Naval Air Warfare Center Aircraft Division Pax River, Building 441, 21983 Bundy Road Unit 7, Patuxent River, Maryland, 20670, United States
- ZIP Code
- 20670
- Solicitation Number
- N00421-17-T-0013
- Archive Date
- 11/9/2016
- Point of Contact
- Donna M Owens, Phone: 301-757-3066, Donna M Owens, Phone: 301757-3066
- E-Mail Address
-
donna.owens@navy.mil, donna.owens@navy.mil
(donna.owens@navy.mil, donna.owens@navy.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Horse Power Requirements for Spindle - 10HP Maximum Spindle Speed required - XxYxZ ipm= 800x800x700 Spindle Taper size - Max spindle nose to table- 24" - Min spindle nose to table 3 3/8" - Max clearance spindle center to column 19 1/4" Is a pallet changer required - NO Vertical or Horizontal machining center? - Vertical Is there a preferred machine brand? - NO What power is available in the building and what voltage should the machine be wired for? - voltage will be determined by the machine. Available is - 240V Please define Medium and Large in measured sizes for "Fixture Plates" - SMALL -16"x15.5", Medium- 16"x 24", and Large-16"x32" Would MasterCAM be a suitable converter for Parasolid and DXF files? - YES,ALSO NEEDS TO CONVERT PRIOR-GENERATION PROTOTRAK PROGRAMS Do we need to provide a computer for the software to run on or can the software and training be completed on existing computers? - NO What are the space requirements in the building for the machine? - 160"X 96" Is compressed air available in the building? - YES Are there any obstructions or building limitations which would not allow standard rigging equipment to enter and place the machine? -No using the space dimensions provided. Will onsite electricians and plumbers connect the machine to power and air or should we include those services? - Completed locally. Contractor assist in final installation and leveling system once in place. Once power and air are installed contractor would return to complete system functional check/training. If we need to do electrical work, how far from will the machine be installed from the main or sub panel on which we'll draw from? - N/A
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVAIR/N00421/N00421-17-T-0013/listing.html)
- Place of Performance
- Address: NAWCAD, Patuxent River, Maryland, 20670, United States
- Zip Code: 20670
- Zip Code: 20670
- Record
- SN04309282-W 20161022/161020234410-414fa6d53a587de846e1b0949774aa0c (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |