SOURCES SOUGHT
J -- Diver Services for Coast Guard Cutters - SOW/Specs for Diver Services - DOL Wage Rates
- Notice Date
- 11/1/2016
- Notice Type
- Sources Sought
- NAICS
- 561990
— All Other Support Services
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Base Miami Beach, 909 SE First Avenue, Room 512, Miami, Florida, 33131-3050, United States
- ZIP Code
- 33131-3050
- Solicitation Number
- HSCG28-17-Q-7XX000
- Archive Date
- 11/24/2016
- Point of Contact
- Terry Trexler, Phone: 305-535-7675
- E-Mail Address
-
Terry.A.Trexler@uscg.mil
(Terry.A.Trexler@uscg.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- DOL Wage rates for all other US DOL Wage rates for SC, GA and Florida SPECS on 87' and 154' cutters, SOW Sources sought for contractors who can perform the following Dive services for Coast Guard Cutters located in South Carolina, Florida and Puerto Rico. Dive services to include the following work items for 87' and 154' cutters (see attached SOW for details) Work Item #1 Running Gear (U/W Body) Diver's Cleaning 1. SCOPE 1.1 Intent. This work item describes the requirements for the Contractor to clean the vessel's Running Gear, while the vessel is moored pier side. Affected surfaces or components include, but are not limited to the following: • Transducer(s). • Propellers. • Rudders. • Shafts. • Sea chest(s) and strainer(s). • Stabilizing fins. • Miscellaneous appendages (examples: bilge keels, rope guards, fairwaters, fins, etc). • Hull and sea chest zinc anodes. • Bow thruster. Work Item #2: Hull Plating (U/W Body) Diver's Cleaning 1. SCOPE 1.1 Intent. This work item describes the requirements for the Contractor to clean the vessel's U/W body, while the vessel is moored pier side. Affected surfaces or components include, but are not limited to the following: • U/W hull plating. • U/W body coating system. • Transducer(s). • Sea chest(s) and strainer(s). • Stabilizing fins. • Miscellaneous appendages (examples: bilge keels, rope guards, fairwaters, fins, etc). • Hull and sea chest zinc anodes. • Bow thruster. Work Item #3 Hull Plating (U/W Body) Diver's Inspection 1. SCOPE 1.1 Intent. This work item describes the requirements for the Contractor to conduct inspection of the vessel's U/W body, while the vessel is moored pier side. Affected surfaces or components include, but are not limited to the following, as applicable: • U/W hull plating. • U/W body coating system. • Transducer(s). • Propellers. • Rudders. • Shafts. • Sea chest(s) and strainer(s). • Stabilizing fins. • Miscellaneous appendages (examples: bilge keels, rope guards, fairwaters, fins, etc). • Hull and sea chest zinc anodes. • Bow thruster. Coast Guard anticipates posting solicitation in FBO OOA 16 November 2016 for Diver Services.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/COUSCGISCMi/HSCG28-17-Q-7XX000/listing.html)
- Place of Performance
- Address: Coast Guard Cutters located in Charleston SC, San Juan Puerto Rico, Jacksonville, FL, St. Petersburg, FL, Key West FL, Fort Myers, FL, Miami, FL, Fort Lauderdale, FL, Fort Pierce, FL, Cape Canaveral FL, Tybee Island GA., United States
- Record
- SN04317986-W 20161103/161101234951-fc4a928d42648c3a45e26a4cee039967 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |