SOURCES SOUGHT
59 -- Conduit Bundle Assemblies
- Notice Date
- 11/3/2016
- Notice Type
- Sources Sought
- NAICS
- 335999
— All Other Miscellaneous Electrical Equipment and Component Manufacturing
- Contracting Office
- Department of Energy, SLAC National Accelerator Lab, SLAC National Accelerator Lab, 2575 Sand Hill Road, Menlo Park, California, 94303, United States
- ZIP Code
- 94303
- Solicitation Number
- SLAC-ConduitBundleAssemblies
- Archive Date
- 12/2/2016
- Point of Contact
- Katherine A. Coh, Phone: 6509262770
- E-Mail Address
-
kcoh@slac.stanford.edu
(kcoh@slac.stanford.edu)
- Small Business Set-Aside
- N/A
- Description
- SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. "Conduit Bundle Assemblies Scope of Work Summary: The conduit bundle assembly project will consist of assembling 4 each of 4"IMC (Intermediate Metallic Conduit), 3 each of 2"IMC and 2 each of 1-1/2" IMC conduits. The bundle assembly is composed of standard 10-FT straight sections of conduits to makeup an overall total length of 27 FT, including a 90-degree galvanized rigid steel conduit elbow at one end of each 27ft conduit sub-assembly. The conduits sub-assemblies are held and welded together with a pre-fabricated steel plates to form a solidly assembled unit. The conduit bundle assembly unit is attached and supported to a pre-fabricated steel bracket at the 90-degree elbow end to be used for rigging and mounting. SLAC will design and provide the conduit assembly drawings and the specifications. The total number of conduit bundle assembly units are 105. The Subcontractor shall furnish all labor, supervision, materials (conduits, elbows and fittings, structural steel parts) tools, equipment and incidentals required for the fabrication, assembly, testing and shipment of the complete conduit bundle assembly. The Subcontractor shall fabricate at their shop the steel spacer plates, angle brackets and conduit supports, and assemble and deliver each identical conduit bundle assembly unit to SLAC as specified and shown on contract drawings."
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/SLAC/STAN/SLAC-ConduitBundleAssemblies/listing.html)
- Place of Performance
- Address: SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, California, 94025, United States
- Zip Code: 94025
- Zip Code: 94025
- Record
- SN04320098-W 20161105/161103234717-527f4b7ae214fabed23f97ef369170dd (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |