SOURCES SOUGHT
66 -- CASE FILM LINE WITH 65mm Temperature Controlled Film Die
- Notice Date
- 11/4/2016
- Notice Type
- Sources Sought
- NAICS
- 334519
— Other Measuring and Controlling Device Manufacturing
- Contracting Office
- Department of the Army, Army Contracting Command, ACC - APG (W912CG) Natick Installation, BLDG 1 KANSAS STREET, Natick, Massachusetts, 01760-0000, United States
- ZIP Code
- 01760-0000
- Solicitation Number
- W56YHX17XCF02
- Archive Date
- 11/15/2016
- Point of Contact
- Darlene L. Rideout, Phone: 5082334112
- E-Mail Address
-
darlene.l.rideout.civ@mail.mil
(darlene.l.rideout.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- INTRODUCTION The US Army Natick Research Engineering and Development Center (NSRDEC) in Natick, Massachusetts is issuing this Sources Sought synopsis as a means of conducting market research to identify potential sources that have the ability to provide a 65mm heated cast film die and 3-calender take-off unit that are interchangeable with an existing micro compounder. This auxiliary cast film line is being used for polymer and materials development by the Combat Feeding Directorate (CFD). The specific requirements can be found in the ‘Required Capabilities' section of this sources sought. The results of this market research will used to determine the method of procurement. Based on the responses to this sources sought notice/market research, this requirement may be set-aside for small businesses (in full or in part) or procured through full and open competition. All small business set-aside categories will be considered. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding submissions. DISCLAIMER THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP) TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGHATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. PROGRAM BACKGROUND A cast film die and take-off unit that is interchangeable with an existing micro compounder, and capable of producing high quality film large enough for barrier and mechanical testing, is necessary to develop polymeric materials and films in support of projects funded by the Combat Feeding Research and Engineering Board. The delivery location will be the US Army NSRDEC in Natick, Massachusetts, Building 36. REQUIRED CAPABILITIES The government requires a cast film die and take-off unit that is interchangeable with a current DSM Xplore Micro 15cc Twin Screw Compounder. The die and take-off unit is required to allow for screening of new materials. The cast film die must have a coat hanger design, and be completely demountable and easy to clean. The slit width and height of the die shall be 65mm and 0.4mm, respectively. The die must be heated independently with an operator controllable temperature setting, and a maximum operating temperature of 400C. The cast film take-off unit must utilize an air knife and air pins to minimize necking. The line must have three calenders with polished nickel metal rolls. The take-off line must have the following features: 1) Speed controlled take up calender cast roll and a smaller guide roll. 2) Speed controlled transport calender roll, with 1 transport roll and a pinch roll on top. The pinch roll weight load on the film must be adjustable. 3) Torque controlled winder calender roll for smooth film winding. 4) Calenders placed on a frame which allows for adjustment of the distance to the film die and the distance between the three calenders. SUBMISSION DETAILS Interested businesses should submit a brief capabilities statement package (no more than one 8.5 x 11 inch page, font no smaller than 10 point) demonstrating ability to provide the range of equipment and supplies listed in the Required Capabilities section. Your response to this Sources Sought, including any capabilities statement, shall be electronically submitted to Sarah Cheney, in either Microsoft Word or Portable Document Format (PDF), via email (sarah.l.cheney.civ@mail.mil) no later than 12:00 p.m (EST) on 14 November 2016 and reference this synopsis number in the subject line of e-mail and on all enclosed documents. Information and materials submitted in response to this request WILL NOT be returned. DO NOT SUBMIT CLASSIFIED MATERIAL. If your organization has the potential to provide the required services, please provide the following information: 1) Company name and solicitation number in the email subject line. 2) Company address, telephone number, primary contracts with email addresses, business size (i.e. large business, small business, SBA certified HUBZone Business, Economically Disadvantaged Small Business, Woman-Owned Business, Service-Disabled Veteran-Owned Small Business) and proposal NACIS code if different from 334516, 334519 or 326199. 3) Tailored Capability Statements Addressing the Requirements of the notice, with appropriate documentation supporting claims of organizational and staff capability. If significant subcontracting or teaming is anticipated in order to deliver technical capabilities, provide an estimate of anticipated subcontractor efforts. 4) Estimated cost, delivery schedule and any anticipated discounts. 5) If applicable, a GSA schedule number. All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside of the Government. NOTE: THIS IS THE SAME POSTING AS W56YHX17XCF01 - ONLY DIFFERENCE IS POSTING UNDER NAICS 334519
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/469703dc6a73b0a0dfee591c2b80c342)
- Record
- SN04321256-W 20161106/161104234259-469703dc6a73b0a0dfee591c2b80c342 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |