Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF NOVEMBER 09, 2016 FBO #5465
DOCUMENT

71 -- VA258-17-N-0062 LANDSCAPE FORM - Attachment

Notice Date

11/7/2016
 

Notice Type

Attachment
 

NAICS

337127 — Institutional Furniture Manufacturing
 

Contracting Office

Department of Veterans Affairs;VISN/18PHX;777 E. Missouri, Suite 300;Phoenix AZ 85014
 

ZIP Code

85014
 

Solicitation Number

VA25817N0062
 

Response Due

11/9/2016
 

Archive Date

11/12/2016
 

Point of Contact

Derrick Fletcher
 

E-Mail Address

k.fletcher@va.gov<br
 

Small Business Set-Aside

Service-Disabled Veteran-Owned Small Business
 

Description

Southern Arizona VA Healthcare System 3601 South 6th Ave. Tucson AZ 85723 Page 7 of 7 Southern Arizona VA Healthcare System 3601 South 6th Ave. Tucson AZ 85723 Page 1 of 7 DISCLAIMER This RFI is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. In accordance with FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. Point of Contact is Derrick Fletcher at derrick.fletcher@va.gov Furniture Specifications For Southern Arizona VA Healthcare System Patient Care and Environment Bldg 95 Exterior Project September 28, 2016 GENERAL 1.1 Scope of Work 1.1.1 All labor, material equipment and services necessary to manufacture and deliver all furnishes and related components as indicated or specified. 1.2 Quotation Documents 1.2.1 Furniture Specification and Schedule/2237 1.3 Performance Requirements 1.3.1 The specification covers the requirement for exterior furnishings to match existing standard exterior campus furnishings. The minimum acceptable requirements for manufacturer s extent of project line, design, materials, workmanship, performance, safety and services are set forth, hereinafter. Failure to meet the minimum acceptable requirements may result in disqualification of the bid. 1.3.2 All furnishings shall be of a design, material and workmanship to withstand hard 7 day usage over an extended life with a minimum or maintenance and repair. 1.3.3 The manufacture shall provide and be responsible for the technical assistance, development and generation for final specifications. 1.3.4 The manufacturer will provide a minimum of 3 three years from date of invoice warranty, covering parts, labor, and shipping. 1.4 Testing Requirements 1.4.1 All tests indicated herein must be conducted by an independent testing laboratory. Test results must not be more than two years old. Test reports should include complete descriptions of the material and construction, certified by the testing laboratory. 1.4.2 Any test which in not performed or not in accordance with the testing requirements specified shall be identified by the Bidder as a proposed exception and shall be submitted for prior approval. ASTM Testing Standards: 1. ASTM B 117 Standard Practice for Operating Salt Spray (Fog) Apparatus. 2. ASTM D 256 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics. 3. ASTM D 522 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings. 4. ASTM D 523 Standard Test Method for Specular Gloss. 5. ASTM D 570 Standard Test Method for Water Absorption of Plastics. 6. ASTM D 638 Standard Test Method for Tensile Properties of Plastics. 7. ASTM D 696 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30 °C and 30 °C With a Vitreous Silica Dilatometer. 8. ASTM D 790 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials. 9. ASTM D 2247 Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity. 10. ASTM D 2583 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor. 11. ASTM D 2584 Standard Test Method for Ignition Loss of Cured Reinforced Resins. 12. ASTM D 2794 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact). 13. ASTM D 3359 Standard Test Methods for Measuring Adhesion by Tape Test. 14. ASTM D 3363 Standard Test Method for Film Hardness by Pencil Test. 15. ASTM E 84 Standard Test Method for Surface Burning Characteristics of Building Materials. 16. ASTM G 155 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials. B. ISO Testing Standards: 1. ISO 1520 Paints and Varnishes Cupping Test. 2. ISO 2815 Paints and Varnishes Buchholz Indentation Test. C. NEMA Testing Standards: 1. NEMA LD3 High Pressure Decorative Laminates. D. ANSI/BIFMA Testing Standards: 1. ANSI/BIFMA X5.5-2008 Standard Test for Desk / Tables. 2. ANSI/BIFMA X5.4-2005 Standard Test for Lounge Seating 1.5 Submittals 87 1.5.2 Submittals required with the Bid are as Follows: 1.5.2.1 Submit price list for all products and services Bid 1.5.2.2 Submit complete test results 1.5.2.4 Submit manufacturer s product specification and any drawings and samples required for approval prior to commencement of manufacturing. 1.5.2.5 Submit all warranties and maintenance manuals to owner. 1.6 Delivery, Storage and Handling of Materials 1.6.1 Product shall be factory packed with adequate protection to all sides and corners to prevent transit and handling damage. 2.0 PRODUCT Landscape Forms 2.1 General 2.1.1 All finished surfaces shall be free of scratches, mars, dents, or blemishes, and withstand staining, and exhibit to flaking, cracking, or loss or adhesion. 2.1.2 Furnishings shall have smooth finishes with no hazardous projections, sharp corners, or detail, which can be hazardous and cause personal injury or damage to clothing. 2.2 Gretchen Picnic Table 2.2.1 Size: Table Top: 30 H x 29 W x 54 L, Seating 17.5 H x 14 W x 54 L, Overall 30 H x 58.25 W x 54 L 2.2.2 Supports: 2 outside diameter, 0.120 inch wall thickness, tubing. 2.2.3 Material: Polysite constructed of 100% high-density polyethylene (HDPE) derived from recycled post-consumer packaging such as milk containers. Polysite timbers are extruded to size: 3 x 4 molded face boards 2.2.4 Polysite 69% Post-consumer content, 26% Pre-consumer content, Total recycled content 95%, Gretchen 100% recyclable. Color Bark 2.2.5 Finish on Carbon Steel legs: Primer Rust inhibitor, Topcoat Thermosetting polyester powdercoat. UV chip, and flake resistant, gloss garner 60 degrees, ASTM D 523, UV resistance, color and gloss, ASTM G 155, Cycle 7 Delta E less than 2 at 2.0 mils and less than 20 percent loss. ColorL RAL Custom Color 2.2.5.1 Cross-Hatch Adjesion, ASTM D 3359, Method B 100 percent pass. 2.2.5.2 Flexbility test, mandrel, ASTM D 522, 3 mm at 2 mils. 2.2.5.3 Erichsen Cupping ISO 1520: 8mm 2.2.5.4 Impression Hardness Buchholz, ISO 2815, 95 2.2.5.5 Impact Test, ASTM D 2794 60 inches pound at 2.5 mils. 2.3 Litter Receptacle - Plexus 2.3.1 Plexus litter receptacle to be 20 D x 36 H (30 gallon capacity) and have side opening. 2.3.2. Litter Body: Formed of wire grid panel of 5/16 frame and bars 2-1/2 o.c. with 1/8 cross wires ½ o.c. inserted in a 7/8 outer diameter, 0.065 wall thickness steel ring. Litter receptacle front has hinged door that swings open for litter removal. 2.3.3 Lids: Constructed of 14-guage spun metal. Lid is permanently welded to unit. 2.3.4 Sand Pan Insert: Formed by spun steel, finished with black powdercoat. 2.3.5 Liners: Constructed of molded polyethylene. Color coordinates with powdercoat color. 2.3.6 Freestanding Surface Mounted 2.3.7 Powder coated RAL 5021 custom color to match facilities standards. 2.4 Ash Urn Grenadier 2.4.1 Size: 10 D x 35 H 2.4.2 Capacity: 1 ¾ gallons. 2.4.3 Bin 4 x 4 x 0.100 2.4.4 Ash Bin is made of 6063-T6 aluminum extrusion. With a removable top casting is made of 319 aluminum. Base is casting 319 aluminum welded to the extrusion. 2.4.5 Recycled Material Content: Minimum 32 percent. Post-consumer Material content minimum 16 percent, Pre-Consumer material content minimum 16 percent. 100% recyclable. 2.4.6 Primer: Rust inhibitor, Topcoat: Thermosetting TGIC polyester powder coat. UV, chip, and flak resistant 2.4.7 Color RAL, Custom color 2.5 Accessories 2.5.1 Accessories shall match finishes of other Conventional Furniture items with the same location. 3.0 EXECUTION 3.1 N/A END OF SECTION DISCLAIMER This RFI is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. In accordance with FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/VA/PhVAMC/HMC/VA25817N0062/listing.html)
 

Document(s)

Attachment
 

File Name: VA258-17-N-0062 VA258-17-N-0062.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3096975&FileName=VA258-17-N-0062-000.docx)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3096975&FileName=VA258-17-N-0062-000.docx

 

Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 

Place of Performance

Address: Southern Arizona VA Health Care System;3601 S 6th Ave.;Tucson, AZ

Zip Code: 85723
 

Record

SN04321500-W 20161109/161107233929-7428b3a33600ba7d1908dbd5e8024b85 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |