Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF NOVEMBER 09, 2016 FBO #5465
DOCUMENT

71 -- VA258-17-N-0061 MIDMARK BLDG 80 - Attachment

Notice Date

11/7/2016
 

Notice Type

Attachment
 

NAICS

337127 — Institutional Furniture Manufacturing
 

Contracting Office

Department of Veterans Affairs;VISN/18PHX;777 E. Missouri, Suite 300;Phoenix AZ 85014
 

ZIP Code

85014
 

Solicitation Number

VA25817N0061
 

Response Due

11/9/2016
 

Archive Date

11/12/2016
 

Point of Contact

Derrick Fletcher
 

E-Mail Address

k.fletcher@va.gov<br
 

Small Business Set-Aside

Service-Disabled Veteran-Owned Small Business
 

Description

Southern Arizona VA Healthcare System 3601 South 6th Ave. Tucson AZ 85723 Page 6 of 6 Southern Arizona VA Healthcare System 3601 South 6th Ave. Tucson AZ 85723 Page 1 of 6 DISCLAIMER This RFI is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. In accordance with FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. Point of Contact is Derrick Fletcher at derrick.fletcher@va.gov Furniture Specifications For Southern Arizona VA Healthcare System Building 80 Midmark Exam Room Sink Cabinets October 12, 2016 GENERAL 1.1 Scope of Work 1.1.1 All material and equipment necessary to furnish the related components as indicated or specified. 1.2 Quotation Documents 1.2.1 Furniture Specification and Schedule 1.2.2 Drawings: Vendor Drawings 1.3 Performance Requirements 1.3.1 The specification covers the requirement for freestanding and wall mounted furnishings. The minimum acceptable requirements for manufacturer s extent of project line, design, materials, workmanship, performance, safety and services are set forth, hereinafter. Failure to meet the minimum acceptable requirements may result in disqualification of the bid. 1.3.2 All furnishings shall be of a design, material and workmanship to withstand hard 7 day usage over an extended life with a minimum or maintenance and repair. 1.3.3 The manufacture shall provide and be responsible for the technical assistance, development and generation for final specifications. 1.3.4 The manufacturer will provide a limited lifetime warranty provide manufacturer s standard limited warranty for the items listed below. All warranty items should include, covering parts, and shipping. Door and drawer fronts, casters, 5 years. Task lights, 3 years. Laminate top surface and accessories, 1 year. 1.3.5 The Bid winner shall be able to visit the site and have physical response to any issues within twenty-four hour notice from End Users. 1.4 Testing Requirements 1.4.1 All tests indicated herein must be conducted by an independent testing laboratory. Test results must not be more than two years old. Test reports should include complete descriptions of the material and construction, certified by the testing laboratory. 1.4.3 All lighting shall be UL approved. 1.4.4 Any test which in not performed or not in accordance with the testing requirements specified shall be identified by the Bidder as a proposed exception and shall be submitted for prior approval. 1.5 Submittals 1.5.1 Submittals required with the Bid are as Follows: 1.5.2.1 Submit price list for all products and services Bid 1.5.2.2 Submit complete test results 1.5.2.4 Submit shop drawings, complete manufacturer s product specification and any drawings and samples required for approval prior to commencement of manufacturing. 1.5.2.5 Submit all warranties and maintenance manuals to owner. 1.6 Delivery, Storage and Handling of Materials 1.6.1 Product shall be factory packed with adequate protection to all sides and corners to prevent transit and handling damage. 2.0 PRODUCT 2.1 General 2.1.1 All finished surfaces shall be free of scratches, mars, dents, or blemishes, and withstand staining, and exhibit to flaking, cracking, or loss or adhesion. 2.1.2 Furnishings shall have smooth finishes with no hazardous projections, sharp corners, or detail, which can be hazardous and cause personal injury or damage to clothing. 2.2 Modular Casework Midmark, Synthese Casework Collection 2.2.1 Sizes and Configuration: As indicated on the Drawings 2.2.2 Metal finish premium powdercoat, baked-on epoxy. 2.2.3 Metal Finish 7 mil high performance finish applied to powdercoated steel frame. Color to match VA standard 216 Pebble 2.2.4 Casework to be individual, interchangeable, integral, modular units. 2.2.5 Cabinets to be 18 gauge cold rolled steel. Multi-piece shell and frame design; riveted and press joined (Tog-L-Log) 2.2.6 Filler and Trim manufacturer s standard coordinated components. 2.2.7 Door Construction panel style is renew panel style. 2.2.8 Reveal on door is 1mm reveal from the edge of the frame. 2.2.9 Hinges to be standard blum, concealed, self-closing, 110 degree opening, nickel-plated metal, clip-on mount, three adjustment points. 2.2.10 Pulls to be integrated front pull design (over style) recessed clear Snap-On handle with interchangeable color strips 2.2.11 The deep drawer construction: One piece molded polystyrene drawer bodies with rounded corners. 2.2.12 Front and back of drawers are 12 mil seamless polymer-covered front; melamine back. 2.2.13 Drawer reveal: 1 mm reveal from the edge of the frame. 2.2.14 Drawer pulls are recessed clear Snap-On handle with interchangeable color strips. 2.2.15 Adjustable shelving 18 gauge cold rolled steel, painted to match cabinet color; manufacturer s standard die cast zinc support clips. 2.2.16 Locks on doors under the sink cabinet are individually mounted, cam style lock removable lock plug. Locks keyed alike with two keys per lock. 2.2.17 Countertops, Solid Surface: shall be anti-microbial surface. Horizontal surfacing; 0.5 inch thick, matte finish; EOS Cupron material 0.375 in thick. Manufacturer: Dupont Corian 2.5 Accessories 2.5.1 Accessories shall match finishes of other Conventional Furniture items with the same location. 3.0 EXECUTION 3.1 N/A END OF SECTION DISCLAIMER This RFI is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. In accordance with FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/VA/PhVAMC/HMC/VA25817N0061/listing.html)
 

Document(s)

Attachment
 

File Name: VA258-17-N-0061 VA258-17-N-0061.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3096958&FileName=VA258-17-N-0061-000.docx)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3096958&FileName=VA258-17-N-0061-000.docx

 

Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 

Place of Performance

Address: Southern Arizona VA Health Care System;3601 S 6th Ave.;Tucson, AZ

Zip Code: 85723
 

Record

SN04321516-W 20161109/161107233939-765f690652c0b1047591a276d2799aa7 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |