SOURCES SOUGHT
95 -- STEEL REQUIREMENTS (VARIOUS)
- Notice Date
- 11/22/2016
- Notice Type
- Sources Sought
- NAICS
- 331110
— Iron and Steel Mills and Ferroalloy Manufacturing
- Contracting Office
- Department of the Army, Army Contracting Command, ACC - RI (W9098S) (JMTC-RIA), BLDG 211 RODMAN AVENUE, Rock Island, Illinois, 61299-5000, United States
- ZIP Code
- 61299-5000
- Solicitation Number
- W9098S-17-T-STEEL
- Point of Contact
- Sheila K. Peters, Phone: 3097820703
- E-Mail Address
-
sheila.k.peters2.civ@mail.mil
(sheila.k.peters2.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- The purpose of this sources sought notice is to identify sources, both large and small businesses, capable of providing the steel items listed below to support the Rock Island Arsenal Joint Manufacturing and Technology Center (RIA-JMTC), Rock Island, IL 61299: 1) STEEL, STRIP, 1070-1080 0.3MM X 4.8MM. HIGH CARBON STEEL STRIP, COLD ROLLED, SPRING QUALITY, 1070-1080 PER ASTM A684/A684M, PURCHASED AS COIL STRIP, 0.3MM (.012") +/-0.08 (.003") MM THK. X 4.80 MM (.189") +0.08 MM (.003") / -0.2 MM (.0078") WIDE X 200 FEET. - Quantity 200 Feet, Immediate Delivery Required. 2) STL, WIR, 1.00 +/-.01MM, MUSIC SPRING. STEEL, WIRE, ROUND/MUSIC SPRING QUALITY (HIGH CARBON STEEL, COLD FINISHED.) /BRIGHT FINISH APPLIED AT MNFG/IAW ASTM A228/228M/WIRE DIAM TO BE 1.00 +/-.01MM (.0394 +/-.0004")/FURNISH WIRE IN BUNDLED COILS, NOT ON SPOOLS./COILS MUST BE IN SMOOTH LOOPS WITH NO BENDS, TANGLES OR OTHER DEFORMITIES./INSIDE DIAM OF COIL TO BE 18-36" (24" IS PREFERRED)/COIL WEIGHT NOT TO EXCEED 40 LB./SUPPLIER TO MARK COIL LENGTH IN FEET ON EACH COIL./WIRE MUST BE CLEAN AND OILED, OR OTHERWISE TREATED WITH RUST INHIBITOR. COMPLETE COC & CTR MUST ACCOMPANY MATERIAL. ALL REQUIREMENTS MUST BE MET, OR MATERIAL WILL BE REJECTED. - Quantity 90 Feet, Immediate Delivery Required. 3) STEEL BAR ROUND, GRADE 1050-1060. STEEL BAR, ROUND PER ASTM A108, GRADE 1050-1060, COLD-FINISHED, SPHEROIDIZED 2.375# DIAMETER FURNISH IN 12-FT LENGTHS. MATERIAL MUST BE OILED OR OTHERWISE TREATED WITH RUST PREVENTATIVE. MATERIAL MUST BE SUPPLIED IN WOODEN BOXES. MATERIAL MUST BE ACCOMPANIED WITH COMPLETE CERTIFICATE OF CONFORMANCE (COC) AND CERTIFIED TEST REPORT (CTR). - Quantity 36 Feet, Immediate Delivery Required. 4).375" BRO 1095 TGP STL ASTM A576 X 12'..375" DIA. BRO 1095 COLD FINISHED TURNED, GROUND AND POLISHED STEEL ASTM A576 X 12' OAL. MATERIAL MUST BE ACCOMPANIED WITH COMPLETE COC AND CTR, INCLUDING ACTUAL RECORDED TEST RESULTS. IF MATERIAL IS FROM MORE THAN ONE HEAT LOT, EACH LOT MUST BE CLEARLY IDENTIFIED. ALL REQUIREMENTS MUST BE MET OR MATERIAL WILL BE REJECTED. - Quantity 24 Feet, Immediate Delivery Required. 5) STL BOR.749 +/-.0005" DIA., CF, 4140, TG&P, STEEL BAR ROUND,.749 +/-.0005" DIA. WITH ROUNDNESS TOLERANCE OF +/-.00025" AND.006" TIR PER FOOT, 4140, COLD FINISHED, HEAT TREATMENT AT 1540 TO 1580 DEGREES F, OIL QUENCH, TEMPER 1 HR MINIMUM TO RHC 28-35, ASTM A331 SUPERSEDED BY ASTM A108. MUST MEET MINIMUM HARDNESS REQUIREMENT AT CORE. STRAIGHTENED, GROUND AND POLISHED TO MEET SWISS MACHINE REQUIREMENTS. MATERIAL MUST BE OILED OR OTHERWISE TREATED WITH RUST PREVENTATIVE. PURCHASE IN 12 FT LENGTHS MAXIMUM. MATERIAL MUST BE ACCOMPANIED WITH COMPLETE COC & CTR. IF MATERIAL IS FROM MORE THAN ONE HEAT LOT, EACH LOT MUST BE CLEARLY IDENTIFIED. - Quantity 36 Feet, Immediate Delivery Required. 6) STEEL BAR ROUND, 1,OOO INCH DIA. STEEL BAR ROUND, GRADE 1055-1065, COLD-FINISHED, PER ASTM A108, KILLED, SPHEROIDIZED, GRAIN SIZE 5-8, CHEMICAL COMPOSITION: SI (SILICON).15%-.35% OR.20%-.40% 1.000# +.0/-.005" DIA. STRAIGHTENED, GROUND, AND POLISHED TO MEET PRECISION SWISS-STYLE MACHINE REQUIREMENTS. FURNISH IN 12-FT LENGTHS. MATERIAL MUST BE OILED OR OTHERWISE TREATED WITH RUST PREVENTATIVE. MATERIAL MUST BE SUPPLIED IN WOODEN BOXES. MATERIAL MUST BE ACCOMPANIED WITH COMPLETE COC AND CTR. 1.000 +.0000/-.005 DIAMETER. - Quantity 60 Feet, Immediate Delivery Required. Please respond no later than COB 28 November 2016 by email to RIA-JMTC Contract Specialist, Sheila Peters at sheila.k.peters2.civ@mail.mil. This request should not be construed as an obligation on the part of the Government.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/852b19a4d0ca8a57d4fe461c9ebf210b)
- Place of Performance
- Address: Rock Island Arsenal, Rock Island, Illinois, 61299, United States
- Zip Code: 61299
- Zip Code: 61299
- Record
- SN04334113-W 20161124/161122234311-852b19a4d0ca8a57d4fe461c9ebf210b (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |