Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF DECEMBER 01, 2016 FBO #5487
SOLICITATION NOTICE

29 -- DIESEL GENERATOR CONSUMABLE PARTS FOR CGC MELON - PARTS LIST

Notice Date

11/29/2016
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

336611 — Ship Building and Repairing
 

Contracting Office

Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC) Procurement Branch 2, 1301 Clay St., Suite 807N, Oakland, California, 94612-5249, United States
 

ZIP Code

94612-5249
 

Solicitation Number

HSCG85-17-Q-P45335
 

Archive Date

12/24/2016
 

Point of Contact

Daniel J. Nieves, Phone: 510-867-5926, CHAD GINTER, Phone: 510-637-5987
 

E-Mail Address

daniel.j.nieves@uscg.mil, CHAD.E.GINTER@USCG.MIL
(daniel.j.nieves@uscg.mil, CHAD.E.GINTER@USCG.MIL)
 

Small Business Set-Aside

Total Small Business
 

Description

MIDGETT #2SSDG CSO Consumable Parts Listing This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This Request for Quotations incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-65 dated January 29, 2013. This is a 100% small business set-aside. Prospective Offerors are responsible for downloading the solicitation and any amendments. It is the offeror's responsibility to monitor FedBizOpps website for the release of any amendments to this solicitation. The contract will be awarded on a firm-fixed-price basis using simplified acquisition procedures in accordance with FAR Part 13.5. The United States Coast Guard Surface Forces Logistics Center has a requirement for the following supplies: PART NSN QTY DESCRIPTION 9581924 5325-01-343-1092 8 HEAD SEAT RING 8354118 3120-00-824-5330 4 ROD BEARING, UPPER 8291349 5330-00-824-5322 16 GASKET, HANDHOLE COVER 8247063 5330-00-883-7719 16 GASKET, NYLON, HANDHOLE COVER 9580694 5330-00-856-1547 1 GASKET KIT, BLOWER 40145929 2815-00-366-1121 16 VALVE BRIDGE ASM 8369720 4710-01-213-0121 1 LINE DRAIN, RB BLOWER 8028460 3040-00-363-5726 8 SHAFT, ROCKER ARM 9575236 6685-00-133-7717 9 THERMOCOUPLE 179848 5305-00-017-9848 16 BOLT, O-SPEED TRIP ASM 8268641 2815-00-994-7649 8 INSERT. LOWER LINER 40004237 4320-00-366-1173 1 WATER PUMP, NEW 9580777 5330-01-344-4298 1 GASKET KIT, WATER PUMP 8071176 3120-00-363-5831 32 BEARING, CAMSHAFT 9319505 2815-01-340-1470 16 ROCKER ARM ASM, EXHAUST 9319504 2815-01-340-4091 8 ROCKER ARM ASM, INJECTOR 8028006 2815-00-363-5695 2 THRUST COLLAR, MAIN BEARING 9570699 5330-00-363-5816 1 GASKET, BLOWER TO DR 9580698 5330-00-856-1556 1 GASKET KIT, CAM DR. HOUSING 8084670 5330-00-366-2987 1 GASKET, SEPARATOR MOUNTING 8069139 3120-00-363-5826 1 THRUST WASHER, BRONZE, BLOWER DR. 8166495 3120-00-366-2929 1 THRUST WASHER, CAST IRON, BLOWER DR. 8028752 5330-00-530-1339 1 9571664 5330-01-340-8251 2 GASKET, HEAD FRAME TO B/E HOUSING 148147 5340-00-366-1127 16 RETAINER 8032717 5310-00-366-2838 4 NUT, SEALASTIC, 3/8 181407 5306-01-320-9283 8 BOLT, FUEL LINE 116104 5310-01-377-7292 8 WASHER, COPPER, FUEL LINE 9581769SB 8 SEAL, CYL. TEST VALVE 9570765 5330-00-890-5008 1 GASKET, O-SPEED RESET LEVER FLANGE 9570668 5330-00-366-2079 2 GASKET, Y-STRAINER TO HOUSING & FLANGE 8242869 5330-00-823-4912 2 GASKET, Y-STRAINER TO SCREEN & ELBOW 40040028 5330-01-418-6798 1 GASKET, WATER PUMP BLANK FLANGE 40048963 5330-01-418-6313 5 GASKET, L/O LINE TO CAM BRACKETS 9580743 5330-01-360-5164 1 GASKET KIT, CYL. HEAD COVER & SUPPORT FRAME (Round Corner Valve Covers) 9580712 N/A 1 GASKET KIT, CYL. HEAD COVER & SUPPORT FRAME (Square Corner Valve Covers) 9570629 5330-01-379-4381 1 GASKET, SEPARATOR SUPPORT MOUNTING 8237900 3120-00-795-4915 4 CAM BEARING, ACC DR END 8253825 3120-00-795-4916 4 CAM BEARING, CAMSHAFT DR END 8069157 3120-00-363-5812 1 BUSHING, BLOWER DR 40049620 N/A 1 CLAMP, EXHAUST 40049619 N/A 1 SEAL, EXHAUST 9570695 5330-00-363-5811 1 GASKET, Y-FLANGE MOUNT, AFTERCOOLER 9570898 N/A 1 GASKET, WATER OUTLET FLANGE 8080078 N/A 2 BOLT, GOV CONTROL ARM 8032716 N/A 3 NUT, SEALASTIC, GOV CONTROL ARM 8032718 5310-00-366-3099 8 NUT, FUEL LINE 8266424 N/A 8 BOLT, CAM BRACKET TO CRANKCASE 8266361 N/A 16 BOLT, CAM BRACKET TO CRANKCASE 103342EMD N/A 8 WASHER, STEEL, FUEL LINE 3203355 5330-00-826-9733 2 GASKET, L/O PUMP BYPASS VALVE 3258858EMD N/A 2 GASKET, L/O PUMP FLANGE 40036564 3110-01-385-5919 2 BEARING, INJECTOR CONTROL ROD 8491160 N/A 1 KIT, MAIN BEARING, UPPER 8491161 N/A 1 KIT, MAIN BEARING, LOWER 9580708 5330-00-856-1558 1 GASKET KIT, L/O PRESS PUMP 40059345 5330-01-227-3515 1 GASKET KIT, L/O SCAV PUMP 9580737 N/A 1 GASKET KIT, O-SPEED HOUSING F-600-200 5325-01-525-3856 8 GARSERT, 3/8-24 181365 5305-00-018-1365 22 BOLT, HEAD FRAME TO B/E HOUSING 181370EMD 5305-00-018-1370 14 BOLT, HEAD FRAME TO O-SPEED HOUSING 454911 5305-00-269-3234 10 BOLT, HEAD FRAME TO CRANKCASE 9509486 5310-01-340-8357 114 WASHER, HARDENED, HEAD FRAME 40037081 N/A 8 BAR, STIFFENER 40037082 N/A 4 BAR, STIFFENER 40037083 N/A 12 BAR, STIFFENER 40037084 N/A 4 BAR, STIFFENER 181364 5305-00-018-1364 12 BOLT, O-SPEED COVER PLATES 9580697 5330-00-856-1555 1 GASKET KIT, FUEL MANIFOLD 8451824 2815-01-444-7541 1 LEVER ASM, CONTROL 8224549 4710-00-366-3046 1 L/O LINE, BLOWER SUPPLY 103608 5315-00-198-5982 2 PIN, TAPER, #4 X 2 40036565 3110-01-445-5608 4 BEARING, GOV CONTROL ARM 40039280 5330-00-224-0113 2 GASKET, INJECTOR CONTROL SHAFT 8032719 5310-00-188-1977 4 NUT, SEALASTIC,1/2-20 8054047 5365-00-366-3455 2 SPACER, CONTROL 8054053 5325-00-363-5873 2 SNAP RING, INJ. CONTROL SHAFT BEARING 8070619 5330-00-881-9021 2 RETAINER & SEAL ASM, INJ. CONTROL SHAFT 8194650 N/A 1 BOLT, GOV CONTROL ARM 181313 5305-00-018-1313 10 BOLT, INJ. CONTROL SHAFT 181428 5305-01-143-0463 8 BOLT, SUPPORT, INJ CONTROL SHAFT 8061581 5365-00-447-9732 6 SHIM, INJ. CONTROL SHAFT 9414320 5310-01-444-5593 10 WASHER, FLAT 1/4, INJ. CONTROL SHAFT 8060089 5310-00-762-6195 64 NUT, SEALASTIC, 3/4-16, CYL HEAD TO LINER 8140912 5310-00-366-1134 64 WASHER HARDENED, CYL HEAD TO LINER 8479836 5330-01-393-9967 8 GASKET KIT, CYL HEAD 3324701 5330-00-935-2087 1 GASKET, L/O ELBOW TO BY-PASS LINE 8069480 2815-00-366-2910 1 THRUST PLATE, BLOWER DR 113229 N/A 6 SCREW, FLAT HEAD, BLOWER DR 8433263 2815-01-340-5396 2 SLEEVE, WATER MANIFOLD 8433272 5330-00-031-2025 4 SEAL, WATER MANIFOLD 9580705 5330-01-228-1464 1 GASKET KIT, ACC DR HOUSING 9580709 5330-00-856-1559 1 GASKET KIT, L/O SEPARATOR 9580721 5330-00-890-2293 1 GASKET KIT, GOV DR 40055466 5330-01-377-8475 4 GASKET, EXHAUST TO CRANKCASE 9570576 5330-00-366-3540 2 GASKET, BLOWER SUPPORT TO CRANKCASE 8028264 --363-5758 1 GASKET 8028760 --447-9641 1 GASKET 8029153 --297-5767 1 GASKET 8029165 --599-3561 1 GASKET 8029467 --366-1207 1 GASKET 8159200 --855-9847 1 GASKET 8176033 -1-155-3936 1 PUMP, ROTARY 8213579 -1-263-9644 1 PUMP, ASSEMBLY ROTARY Include freight costs in the RFQ Required Delivery Date: 23DEC2016 Place of Delivery: USCGC MELLON COMMANDING OFFICER, NESU SEATTLE 1519 ALASKAN WAY SOUTH SEATTLE, WA 98134 1. 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The full text of FAR clauses may be accessed electronically at this address: http://www.arnet.gov/far/index.html. FAR 52.204-4 Printed or Copied Double-sided on Recycled Paper (AUG 2000) FAR 52.204-6 Data Universal Numbering System (DUNS) Number (JUN 1999) FAR 52.211-15 Defense Priorities and Allocation System Rating (APR 2008) D0 A3 rating FAR 52.217-5 Evaluation of Options (JUL 1990) FAR 52.222-1 Notice to the Government of Labor Disputes (FEB 1997) FAR 52.223-3 Hazardous Material Identification and Material Safety Data (JAN 1997) Alt I (JUL 1995) FAR 52.233-4 Applicable Law for Breach of Contract Claim (OCT 2004) FAR 52.245-4 Government-Furnished Property (Short Form) (JUN 2003) HSAR 3052.209-72 Organizational Disclosure of Conflicts of Interest 2.FAR 52.212-1 Instructions to Offerors-Commercial Items (Jun 2008). Parties responding to this solicitation may submit their offer in accordance with their standard commercial practices (e.g. on company letterhead, formal quote form, etc.) but must include the following information: 1) company's complete mailing and remittance addresses, 2) discounts for prompt payment if applicable 3) cage code, 4) Dun & Bradstreet number, 5) Taxpayer ID number and 6) Pricing, and Delivery information,. (7) Offerors are instructed to include a completed copy of Federal Acquisition Regulation (FAR) 52.212-3, "Offerors Representations and Certification--Commercial Items (DEC 2012)" and Alt 1 included with their quotation (the provision is attached), or be registered with Online Reps and Certs, https://www.SAM.gov. 3. FAR 52.212-2 Evaluation-Commercial Items (Jan 1999). - This is a commercial item acquisition. The evaluation and award procedures in FAR 13.106 apply. The following evaluation factors shall be considered: Past Performance, Price. Offerors shall submit at least 3 relevant past performance references for contracts with private industry or government instrumentalities (federal, state, or local) performed within the last 3 years. References shall include: 1. Name & contact information of the point of contract (PM/COR), 2. Name of Organization, 3. A brief description of service, 4. Contract Number/Task Order 5. Status (Prime or Sub). The USCG reserves the right to utilize past performance information other than the information submitted with the proposals received in conducting the evaluation. A Contractor without a record of relevant past performance or for whom information on past performance is not available will not be evaluated favorably or unfavorably on past performance, but will receive a neutral rating. The USCG may consider past performance information regarding predecessor companies or subcontractors that will perform major or critical aspects of the requirement when such information is considered relevant. The Government will award a purchase order resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The Government will evaluate offers and make award to the lowest priced technically acceptable offer that is responsive to the terms of this solicitation. 4. FAR 52.212-3 Offeror Representations and Certifications-Commercial Items (NOV 2012) - An offeror shall complete only paragraphs (b) of this provision if the offeror has completed the annual representations and certificates electronically at http://orca.bpn.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (c) through (o) of this provision which can be obtained electronically at http://www.arnet.gov/far. 5. FAR 52.212-4 Contract Terms and Conditions-Commercial Items (Feb 2012) The following addendum applies: Address for submission of invoices is Commercial Invoices USCG Finance Center PO BOX 4115 Chesapeake, VA 23327-4115 (800)564-5504 6. 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders -Commercial Items (November 2012) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: 52.222-3, Convict Labor (June 2003) (E.O. 11755). 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jul 2010) (E.O. 13126). 52.222-21, Prohibition of Segregated Facilities (Feb 1999). 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). 52.223-18, Contractor Policy to Ban Text Messaging while Driving (Aug 2011) (E.O. 13513). 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (Oct. 2003) (31 U.S.C. 3332). 7. HSAR Contract Terms and Conditions Applicable to DHS Acquisition of Commercial Items (SEP 2012) The Contractor agrees to comply with any provision or clause that is incorporated herein by reference to implement agency policy applicable to acquisition of commercial items or components. The provision or clause in effect based on the applicable regulation cited on the date the solicitation is issued applies unless otherwise stated herein. The following provisions and clauses are incorporated by reference: (a) Provisions 3052.209-72 Organizational Conflicts of Interest 3052.219-72 Evaluation of Prime Contractor Participation in the DHS Mentor Protégé Program (b) Clauses. 3052.203-70 Instructions for Contractor Disclosure of Violations 3052.204-70 Security Requirements for Unclassified Information Technology Resources 3052.204-71 Contractor Employee Access __Alternate I 3052.205-70 Advertisement, Publicizing Awards, and Releases 3052.209-73 Limitation on Future Contracting 3052.215-70 Key Personnel or Facilities 3052.219-70 Small Business Subcontracting Plan Reporting 3052.228-70 Insurance 3052.242-72 Contracting Officer's Technical Representative 3052.247-72 F.O.B Destination Only The full text of HSAR clauses above may be accessed electronically at this address: http://www.dhs.gov/xlibrary/assets/opnbiz/hsar.pdf 8. 25.101 BUY AMERICA ACT (a) The Buy American Act restricts the purchase of supplies that are not domestic end products. For manufactured end products, the Buy American Act uses a two-part test to define a domestic end product. (1) The article must be manufactured in the United States; and (2) The cost of domestic components must exceed 50 percent of the cost of all the components. In accordance with 41 U.S.C. 431, this component test of the Buy American Act has been waived for acquisitions of COTS items (see 12.505(a)). (b) The Buy American Act applies to small business set-asides. A manufactured product of a small business concern is a U.S.-made end product, but is not a domestic end product unless it meets the component test in paragraph (a)(2) of this section. (c) Exceptions that allow the purchase of a foreign end product are listed at 25.103. The unreasonable cost exception is implemented through the use of an evaluation factor applied to low foreign offers that are not eligible offers. The evaluation factor is not used to provide a preference for one foreign offer over another. Evaluation procedures and examples are provided in Subpart 25.5. 52.249-1 TERMINATION FOR CONVENIENCE OF THE GOVERNMENT The Contracting Officer, by written notice, may terminate this contract, in whole or in part, when it is in the Government's interest. If this contract is terminated, the rights, duties, and obligations of the parties, including compensation to the Contractor, shall be in accordance with Part 49 of the Federal Acquisition Regulation in effect on the date of this contract. 9. Questions and quotes shall be emailed to DANIEL.J.NIEVES@USCG.MIL Contractors are responsible for verifying receipt of proposals. INTERESTED VENDORS PLEASE SIGN 1449 ACCOMPANIED BY OFFICIAL QUOTE WITH A SAM.GOV REGISTERED DUNS NUMBER AND EMAIL TO DANIEL.J.NIEVES@USCG.MIL
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/VPLMLCP/HSCG85-17-Q-P45335/listing.html)
 

Place of Performance

Address: CGC MELLON, 1519 ALASKAN WAY SOUTH, SEATTLE, WA 98134, SEATTLE, Washington, 98134, United States

Zip Code: 98134
 

Record

SN04337655-W 20161201/161129233830-de26ec68776383df1941f24fa95a9497 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |