MODIFICATION
84 -- Mission Essential Ballistic Resistant Equipment - Questions and Answers
- Notice Date
- 12/9/2016
- Notice Type
- Modification/Amendment
- NAICS
- 315990
— Apparel Accessories and Other Apparel Manufacturing
- Contracting Office
- Department of Homeland Security, Transportation Security Administration, Headquarters TSA, 601 S. 12th Street, TSA-25, 10th Floor, Arlington, Virginia, 20598, United States
- ZIP Code
- 20598
- Solicitation Number
- HSTS05-17-Q-FLT005
- Archive Date
- 1/3/2017
- Point of Contact
- Kevin Newton,
- E-Mail Address
-
kevin.newton@tsa.dhs.gov
(kevin.newton@tsa.dhs.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- Questions and Answers - 9 Dec 16 (i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. (ii) The solicitation number is HSTS05-17-Q-FLT005. The solicitation is issued as a request for proposal (RFP). (iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-92. (iv) This solicitation is set-aside for small business concerns. The associated NAICS code is 315990 with a small business size standard of 500 employees. (v) Contract Line Item Number 0001 Ballistic Panels 600 Each (vi) Description of requirements for the items to be acquired: Ballistic Panels. Technical requirements for the ballistic panels are included in the attached Statement of Work. (vii) Delivery of all ballistic panels shall occur within 30 days after receipt of order or by 31 Jan 17, whichever occurs first. FOB Destination to Egg Harbor Township NJ 08234. (viii) The provision at 52.212-1, Instructions to Offerors -- Commercial applies to this acquisition. The following addends apply to the provision: - Paragraph (d) of the provision is deleted in its entirety and replaced with the following: " Product samples are required. Samples shall be sent to: COR Terrel Roberts, 601 South 12th Street, Arlington VA 22202. Samples shall be delivered and received by Mr. Roberts no later than 19 Dec 16. Please note that due to enhanced security measures, all packages shipped to TSA by the US Postal Service or shipping carriers (e.g. UPS, Fedex, etc.) undergo security screening which may delay receipt of samples submitted from dates guaranteed by the shipper. Please plan accordingly. The Government requires 2 sample ballistic panels (at no expense to the Government) for necessary manufacturing design and inspection purposes. The samples will be used for technical evaluation and testing purposes, which may involve destructive testing. Using the evaluation process described herein, not all product samples may be tested. Product samples that have been tested will not be returned to the sender under any circumstance. Product samples that have not been tested may be returned at the sender's request and expense. Product samples will not count toward the final order quantities. " (ix) The provision at 52.212-2, Evaluation -- Commercial Items does not apply to the solicitation. The evaluation procedures to be used are as follows: - Award will be made using the lowest price technically acceptable (LPTA) selection process. Award may be made on initial quotations. Therefore, each initial quote should contain the quoter's best terms from a technical and price standpoint. However, the Government reserves the right to contact quoters if it is later determined by the contracting officer to be necessary. The LPTA process will proceed as follows: 1) Quotes may be removed from consideration for any of the following reasons: • Quotes that are not received timely • Quotes that fail to follow the instructions in FAR Provision 52.212-1 • Quotes that fail to submit any required documentation • Quotes that have language inconsistent with the terms and conditions set forth in the solicitation 2) Quotes will be ordered by price from lowest to highest. 3) The Government will then review Factor 1 of the lowest priced quote. If the review finds that Factor 1 of the lowest priced quote is acceptable, the Government will then evaluate Factor 2 of the lowest priced quote. If the review finds that Factor 2 of the lowest priced quote is acceptable, then the quote is techincally acceptable and the technical evaluation stops at this point. The Government will then evaluate Factor 3 of the lowest priced quote. If the review finds that Factor 3 of the lowest priced quote finds to be satisfactory, that quote represents the best value to the Government and the evaluation process stops at this point. Award of any quote is contingent upon a subsequent determination of price reasonableness and of contractor responsibility by the Contracting Officer. Upon such a determination, award will be made to the lowest-priced quoter without further consideration of any other quoters. If the lowest quote is determined not to be acceptable for any reason, then the next lowest priced quote will receive an evaluation as described above. The process will continue (in order by price) until a quote from a responsible contractor is determined to be acceptable and priced fairly and reasonably. 4) USING THIS PROCEDURE, THE GOVERNMENT MIGHT NOT EVALUATE ALL QUOTES. - Each Factor will be evaluated as follows: Factor 1. Technical Acceptability Past performance will be rated on an "acceptable" or "unacceptable" basis as follows: Rating - Description Acceptable - The quoted product meets all technical criterion stated in the Statement of Work. Unacceptable - The quoted product does not meet all technical criterion stated in the Statement of Work. Factor 2. Past Performance Past performance will be rated on an "acceptable" or "unacceptable" basis as follows: Rating - Description Acceptable - Based on the quoter's performance record, the Government has a reasonable expectation that the quoter will successfully perform the required effort, or the quoter's performance record is unknown. (See note below.) Unacceptable - Based on the quoter's performance record, the Government has no reasonable expectation that the quoter will be able to successfully perform the required effort Note: In the case of a quoter without a record of relevant past performance, or for whom information on past performance is not available or so sparse that no meaningful past performance rating can be reasonably assigned, the quoter may not be evaluated favorably or unfavorably on past performance. Therefore, the quoter shall be determined to have unknown past performance. In the context of acceptability/unacceptability, "unknown" shall be considered "acceptable." Note: Quoters are not required or requested to submit past performance references. The Government will use public and Government-restricted sources (e.g. PPIRS) to evaluate past performance. Factor 3. Price Price will not be rated. Price analysis will be conducted to determine reasonableness. (x) Quoters are required to include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications -- Commercial Items with its quote. Quoters shall complete only paragraph (b) of this provision if they have completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov. If the Quoter has not completed the annual representations and certifications electronically, it shall complete only paragraphs (c) through (q) of this provision. (xi) The clause at 52.212-4, Contract Terms and Conditions -- Commercial Items applies to this acquisition. There are no addenda to the clause. (xii) The clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items applies to this acquisition. The following FAR clauses cited in the clause are applicable to the acquisition: From Paragraph (b) _X_ (4) 52.204-10, Reporting Executive compensation and First-Tier Subcontract Awards (Oct 2015) (Pub. L. 109-282) (31 U.S.C. 6101 note). _X_ (14) (i) 52.219-6, Notice of Total Small Business Aside (Nov 2011) (15 U.S.C. 644). _X_ (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C. 632(a)(2)). _X_ (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755). _X_ (26) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Feb 2016) (E.O. 13126). _X_ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). _X_ (28) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246). _X_ (30) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793). _X_ (33) (i) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627). _X_ (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving (Aug 2011) (E.O. 13513). _X_ (45) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83). _X_ (48) 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). _X_ (54) 52.232-33, Payment by Electronic Funds Transfer- System for Award Management (Jul 2013) (31 U.S.C. 3332). From Paragraph (e) _X_ (A) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627). (xiii) The following additional contract requirements or terms and conditions determined by the contracting officer to be necessary for this acquisition and consistent with customary commercial practices are included as follows: 52.225-2 Buy American Certificate (May 2014) (a) The offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e. an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." The terms "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," "and "United States" are defined in the caluse of this solicitation entitled "Buy American - Supplies." (b) Foreign End Products: Line item No: Country of Origin: [List as necessary] (c) The Government will evaluate offers in accordance with the policies and procedures of Part 25 of the Federal Acquisition Regulation. (End of Provision) 3052.212-70 Contract Terms and Conditions Applicable to DHS Acquisition of Commercial Items (SEP 2012) The Contractor agrees to comply with any provision or clause that is incorporated herein by reference to implement agency policy applicable to acquisition of commercial items or components. The provision or clause in effect based on the applicable regulation cited on the date the solicitation is issued applies unless otherwise stated herein. The following provisions and clauses are incorporated by reference: (a) Provisions. N/A (b) Clauses. _X_3052.247-72 F.o.B. Destination Only. G. 5200.243.001 CONTRACTING OFFICER (CO) (JUL 2015) The Contracting Officer is the only person authorized to make any changes, approve any changes in the requirements of this contract, issue orders, obligate funds and authorize the expenditure of funds, and notwithstanding any term contained elsewhere in this contract, such authority remains vested solely in the Contracting Officer. (For further information, the Contracting Officer is a federal government employee who is specifically authorized and appointed in writing under specified agency procedures and granted the authority to enter into, administer, and/or terminate contracts and make related determinations and findings.) In the event, the Contractor makes any changes at the direction of any person other than the Contracting Officer, the change will be considered to have been without authority and no adjustment will be made in the contract price to cover any increase in costs incurred as a result thereof. The following Primary Contracting Officer is assigned to this contract. Alternate Contracting Officers may be assigned: TSA Contracting Officer: NAME: Kevin Newton PHONE NUMBER: 202.631.3110 EMAIL: kevin.newton@tsa.dhs.gov (End of clause) G.5200.242.003 SUBMISSION OF INVOICES (JUL 2015) (a) Background: The Transportation Security Administration (TSA) partners with the United States Coast Guard Finance Center for financial services in support of TSA operations, including the payment of contractor invoices. Therefore, all contractor invoices must be submitted to, and will be paid by, the U.S. Coast Guard Finance Center (FinCen). (b) Invoice Submission Method: Invoices may be submitted via facsimile, U.S. Mail, or email. Contractors shall utilize ONLY ONE method per invoice submission. The submission information for each of the methods is as follows in order of preference: 1) Facsimile number is: 757-413-7314 The facsimile number listed above shall be used by contractors for ORIGINAL invoice submission only. If facsimile submission is utilized, contractors shall not submit hard copies of invoices via the U.S. mail. It is the responsibility of the contractor to verify that invoices are received, regardless of the method of submission used. Contractors may inquire regarding the receipt of invoices by contacting the U.S. Coast Guard Finance Center via the methods listed in subparagraph (d) of this clause. 2) Address / Contact Information United States Coast Guard Finance Center TSA Commercial Invoices P.O. Box 4111 Chesapeake, VA 23327-4111 (FIN-SMB-TSAInvoices@uscg.mil or www.fincen.uscg.mil) (c) Invoice Process: Upon receipt of contractor invoices, FinCen will electronically route invoices to the appropriate TSA Contracting Officer's Representative and/or Contracting Officer for review and approval. Upon approval, the TSA will electronically route the invoices back to FinCen. Upon receipt of certified invoices from an Authorized Certifying Official, FinCen will initiate payment of the invoices. Note for discounts offered: Discounts on invoices. If desired, the Contractor should offer discounts directly upon the invoice submitted, clearly specifying the terms of the discount. Contractors can structure discounted amounts for payment for any time period less than the usual thirty day payment period specified under Prompt Payment requirements; however the Contractor should not structure terms for payment of net amounts invoiced any sooner than the standard period required under FAR Subpart 32.9 regarding prompt payments for the specified deliverables under contract. Discounts offered after invoice submission. If the Contractor should wish to offer a discount on a specific invoice after its submission for payment, the Contractor should submit a letter to the Finance Center identifying the specific invoice for which a discount is offered and specify the exact terms of the discount offered and what time period the Government should make payment by in order to receive the discount. The Contractor should clearly indicate the contract number, invoice number and date, and the specific terms of the discount offered. Contractors should not structure terms for net amount payments any sooner than the standard period required under FAR Subpart 32.9 regarding prompt payments for the specified deliverables under contract. (d) Payment Status: Contractors may inquire on the payment status of an invoice by any of the following means: (1) Via the internet: https://www.fincen.uscg.mil Contacting the FinCen Customer Service Section via telephone at 1-800-564-5504 or (757) 523-6940 (Voice Option #1). The hours of operation for the Customer Service line are 8:00 AM to 5:00 PM Eastern Time, Monday through Friday. However, the Customer Service line has a voice-mail feature that is available 24 hours per day, 7 days per week. (2) Via the Payment Inquiry Form: https://www.fincen.uscg.mil/secure/payment.htm (e) Invoice Elements: Invoices will automatically be rejected if the information required in subparagraph (a)(2) of the Prompt Payment Clause, contained in this Section of the Contract, including EFT banking information, Taxpayer Identification Number (TIN), and DUNS number are not included in the invoice. All invoices must clearly correlate invoiced amounts to the corresponding contract line item number and funding citation. The Contractor shall work with the Government to mutually refine the format, content and method of delivery for all invoice submissions during the performance of the Contract. (f) Supplemental Invoice Documentation: Contractors shall submit all supplemental invoice documentation (e.g. copies of subcontractor invoices, travel vouchers, etc.) necessary to approve an invoice along with the original invoice. The Contractor invoice must contain the information stated in the Prompt Payment Clause in order to be received and processed by FinCen. Supplemental invoice documentation required for review and approval of invoices may, at the written direction of the Contracting Officer, be submitted directly to either the Contracting Officer, or the Contracting Officer's Representative. Note for "time-and-material" type contracts: The Contractor must submit the following statement with each invoice for labor hours invoiced under a "time-and-materials" type contract, order, or contract line item: "The Contractor hereby certifies in accordance with paragraph (c) of FAR 52.232-7, that each labor hour has been performed by an employee (prime or subcontractor) who meets the contract's specified requirements for the labor category invoiced." (g) Additional Invoice Preparation Instructions for Software Development and/or Hardware. The Contractor shall clearly include a separate breakdown (by CLIN) for any software development activities (labor costs, subcontractor costs, etc.) in accordance with Federal Accounting Standards Advisory Board Statement of Federal Financial Accounting Standards Number 10 (Preliminary design costs, Development costs and post implementation costs) and cite payment terms. The contractor shall provide make and model descriptions as well as serial numbers for purchases of hardware and software (where applicable.) (h) Frequency of Invoice Submission. Invoice shall be submitted upon delivery of the items. (End of clause) H.5200.212.001 COMMERCIAL APPLICABILITY (JUL 2015) This contract is for commercial items, as defined by FAR 2.1. (End of clause) H.5200.224.001 DISCLOSURE OF INFORMATION (JUL 2015) Information furnished by the Contractor under this contract may be subject to disclosure under the Freedom of Information Act (FOIA). Therefore, all items that are confidential to business, or contain trade secrets, proprietary, or personally-identifiable information must be clearly marked. Any information made available to the Contractor by the Government must be used only for the purpose of carrying out the requirements of this contract and must not be divulged or made known in any manner to any person except as may be necessary in the performance of the contract. In performance of this contract, the Contractor assumes responsibility for protection of the confidentiality of Government records and information and must ensure that all work performed by its Subcontractor(s) shall be under the supervision of the Contractor or the Contractor's employees. (End of clause) (xiv) The Defense Priorities and Allocations System (DPAS) is not applicable to this acquisition. (xv) Quotes shall be submitted electronically to kevin.newton@tsa.dhs.gov by 19 Dec 16 at 9:00 AM Pacific Time. Questions related to this acquisition shall be submitted by 12 Dec 16 at 9:00 AM Pacific Time. (xvi) For information regarding the solicitation, contact Kevin Newton at kevin.newton@tsa.dhs.gov or 202-631-3110.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/TSA/HQTSA/HSTS05-17-Q-FLT005/listing.html)
- Place of Performance
- Address: Federal Air Marshal Service, 200 West Parkway Drive, Egg Harbor Township, New Jersey, 08234, United States
- Zip Code: 08234
- Zip Code: 08234
- Record
- SN04347983-W 20161211/161209233953-701c9b8b8256965e72c2bdd36064eb1a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |