SOLICITATION NOTICE
53 -- RUGGEDIZED COMPUTERS
- Notice Date
- 1/11/2017
- Notice Type
- Presolicitation
- NAICS
- 332999
— All Other Miscellaneous Fabricated Metal Product Manufacturing
- Contracting Office
- Department of the Navy, Naval Sea Systems Command, NSWC Dahlgren Division, 17362 Dahlgren Road, Suite 157, Dahlgren, Virginia, 22448-5100, United States
- ZIP Code
- 22448-5100
- Solicitation Number
- N00178-17-Q-0002
- Archive Date
- 2/9/2017
- Point of Contact
- Diana M. Moses, Phone: 5406536338
- E-Mail Address
-
diana.moses@navy.mil
(diana.moses@navy.mil)
- Small Business Set-Aside
- N/A
- Description
- This request for information is being posted to the Federal Business Opportunities (FBO) page located at http://www.fbo.gov. Federal Business Opportunities (FBO) will be the single point of entry for posting of synopsis and solicitation to the Internet. This is a Request for Information (RFI) by the Naval Surface Warfare Center, Dahlgren Division (NSWCDD). This RFI is published in accordance with FAR Part 15.201(e), and is for PLANNING PURPOSES ONLY. It does not constitute a Request for Proposal (RFP), or a commitment by the U.S. Government, nor should it be construed as such. Respondents are advised that NSWCDD is under no obligation to acknowledge receipt of information received, or provide feedback to respondents with respect to any Information submitted under this RFI. There shall be no basis for claims against the Government as a result of any information submitted in response to this RFI. The Government does not intend to award a contract on the basis of this RFI, or reimburse RFI preparation costs incurred by any offeror when providing the information requested under this notice. If a solicitation is released at a future date, it will be synopsized on the Federal Business Opportunities (FedBizOpps) website. It is the responsibility of any potential offeror to monitor this site for additional information pertaining to this requirement. The Naval Surface Warfare Center Dahlgren Division (NSWCDD) has tasked E30 to find compatible ruggedized computers as replacements for the current computers that reside in the Gun Module Remote Control System (GMRCS). The current approved ruggedized units are now obsolete and can no longer be purchased from the vendor. E30 is looking for potential substitute parts for the 8480497-1 Computer, Rugged Video and 8480497-3 Computer, Rugged. The units will need to be designed to meet all Gun Mission Module (GMM) required environmental tests, dimensions, connectors, electrical pinouts, and be compatible with the existing Software (SW) baselines with no SW changes. Specifically, the vendor provided units must have the ability to convert digital video to analog video with no changes to the Government owned and deployed Software baseline. Requirements for the computers are documented in WS35376. In order to accomplish a true "drop in replacement" for the obsolete computers, E30 requires vendors to bring their unit to test at the NSWCDD lab, prior to a contract request for proposal is issued. The final ruggedized solution is not required as the evaluation units; however, they shall consist of final product representative computing components in order to verify the compatibility of E30's existing SW baseline. Any drivers required for running RHEL6 will need to be identified to support evaluation of compatibility with the existing SW baseline. The vendor provided computer systems will need to comply with SK110960. The vendor provided computer systems pinouts will need to be compliant with SUW-16-DOC-476 Pin-out Spreadsheet. If initial evaluation units have different pinouts vendors will need to bring cable to support evaluation. The Government retains the right to reject or deny any vendor without comment for any computer system deemed unfit for testing. The efforts required for this RFI are expected to be UNCLASSIFIED, and should not require vendor personnel to obtain a security clearance. However, material will be For Official Use Only (FOUO), and should not be seen or given to any other organization, party, or person. Vendor personnel shall not release or remove system documentation, data, or reports generated by or through the use of Government systems. All requests for information shall be forwarded to the Government. No information shall be released without written approval from the Government. Vendor shall be responsible for travel to and from NSWCDD of their units and any personnel. Responses to this RFI should include as much detailed technical information as possible. There are no limitations on what a response should include, but it should have at a minimum: Company Name and Address Point of Contact to include phone/fax/e-mail) Corporate POC (to include phone/fax/e-mail) Technical POC (to include phone/fax/email) Cage Code NAICS Codes Business Size and Status Type of Small Business (if applicable, i.e. 8(a), woman-owned, HUB zone, etc.) Capability Statement Specific customers (for previous or similar contracts held) Any Other material (relevant to establishing core competencies of the firm) NSWCDD may request further information regarding the capabilities of respondents to meet the requirements as deemed necessary. At no cost to the Government, responding vendors/offerors may continue technical dialogue via this market survey through the Contract Specialist after the initial response is provided. Eligible partners who may respond to this synopsis include companies, public and private foundations, non-profit organizations (including universities) and state or local government organizations.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSEA/N00178/N00178-17-Q-0002/listing.html)
- Place of Performance
- Address: DAHLGREN, Virginia, 22448, United States
- Zip Code: 22448
- Zip Code: 22448
- Record
- SN04369384-W 20170113/170111234553-94de7a9ae2e4dd46c5fb4c3c439ba6e8 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |