SOURCES SOUGHT
47 -- Drift Tube Bake Out
- Notice Date
- 1/25/2017
- Notice Type
- Sources Sought
- NAICS
- 333242
— Semiconductor Machinery Manufacturing
- Contracting Office
- Department of Energy, SLAC National Accelerator Lab, SLAC National Accelerator Lab, 2575 Sand Hill Road, Menlo Park, California, 94303, United States
- ZIP Code
- 94303
- Solicitation Number
- SLAC_Drift_Tube_Bake_Out
- Archive Date
- 2/23/2017
- Point of Contact
- Howard J Wilson, Phone: 6509262769
- E-Mail Address
-
hwilson@slac.stanford.edu
(hwilson@slac.stanford.edu)
- Small Business Set-Aside
- N/A
- Description
- We are looking for vendors with the ability to bake out drift tubes fabricated from stainless steel with ISO 9803-2 knife-edge flanges (CF) for use in Ultra High Vacuum (UHV) beamlines. Maximum bake out temperature is 425 C. The baked out tubes are required to be hydrocarbon free when measured by RGA test at 150 C and to achieve a hydrogen outgassing rate below 2x10 -12 Torr-L/sec-cm 2 at 20 C after receipt at SLAC. Drift tubes will be of varying diameters and length. Diameters will range between 1.5" OD and 4" OD with the majority being 2" OD. Individual drift tube lengths will vary up to 16.5 feet, with the majority being less than 10 feet. The composite total length of drift tubes is approximately 7000 feet.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/SLAC/STAN/SLAC_Drift_Tube_Bake_Out/listing.html)
- Place of Performance
- Address: 2575 Sand Hill Road, Menlo Park, California, 94025, United States
- Zip Code: 94025
- Zip Code: 94025
- Record
- SN04381015-W 20170127/170125234821-48eeedfe1f9bcc7d7b5c0a2058756e90 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |