MODIFICATION
19 -- REPAIR OF 36FT HARBOR SECURITY BOATS
- Notice Date
- 2/13/2017
- Notice Type
- Modification/Amendment
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of the Navy, Naval Sea Systems Command, Puget Sound Naval Shipyard (PSNSY) and IMF, 1400 Farragut Ave, Puget Sound Naval Shipyard, Bremerton, Washington, 98207-5005, United States
- ZIP Code
- 98207-5005
- Solicitation Number
- N4523A-17-R-0023
- Archive Date
- 3/8/2017
- Point of Contact
- Melvin A. Tiglao, Phone: 253-232-2050, Declan D. Jarry,
- E-Mail Address
-
melvin.tiglao@navy.mil, declan.jarry@navy.mil
(melvin.tiglao@navy.mil, declan.jarry@navy.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Amendment # 5 The purpose of this amendment is to: 1) Provide answers to additional Offeror questions. 2) Close the period of requesting additional information. Question # 1 Will welding in accordance with MIL-STD 1689 vs ABS requirements be acceptable for the structural welding on this contract? Answer # 1 The contractor will conduct welding in accordance with "Fabrication, Welding and Inspection of Small Boats and Craft, Aluminum Hulls - TO300-AU-SPN-010-A" and Navy Standard Item 009-12. The Contractor will perform welding to this standard to perform the work specified in LARs 64PB-1701. (See attached pdf dated February 13, 2017 in this Amendment # 5.) Question # 2 Do the support stiffeners underneath the HSB swim platform supposed to be replaced with "C" Channels (same as material already installed) or "L" Channels. Answer # 2 "L" Channels Question # 3 A request for clarification in regards to HSB609 boat repairs. Work Items 3.6.3 and 3.6.10 to 3.6.17 were only listed as work items for this vessel. Does this mean accomplish ONLY work items 3.6.3 and 3.6.10 to 3.6.17, and omit 3.1, 3.3, 3.4, 3.5? Answer # 3 Yes. Addendums to the Statement of Work- A. As per Amendment #3 Question # 1, Under the line "Work Items 3.6.3 and 3.6.10 to 3.6.17", 3.6.17 is now replace with 3.6.14, thus it now states "Work Items 3.6.3 and 3.6.10 to 3.6.14". B. As per Amendment #3, The paragraph underneath the "All the items in 3.7 preservation and Painting" is replaced with the following paragraph: The Contractor must follow the applicable requirements when installing the bilge blowers, vents and drain holes on HSB609, which is already bilge coated. As a rule, the Contractor will need to repair all bilge, hull, and superstructure paint and non-skid that was damaged during the course of work using the specified products and application procedures. The contractor will also be required to adhere to the appropriate Work Preparation items. C. Section 2.3 Consolidated List of References: New Reference #50: TO300-AU-SPN-010-A Fabrication, Welding and Inspection of Small Boats and Craft, Aluminum Hulls. D. Section 3.6 Structural Work is re-worded as follows: Accomplish the following repairs IAW paragraphs 2.1 through 2.3, American Bureau of Shipping standards, American Boat and Yacht Council standards and good marine repair practices.* *Note this encompasses and prioritizes aluminum welding standards specified in TO300-AU-SPN-010-A and Navy Standard Item 009-12. E. The Final LAR 36PB-1701 is attached. Changes: 1) Page 4 of 16: Parts List (Quantity for One Boat): Item No. 3: "Louvered Vent, 10 1/8 X 4 7/8, Blk" inserted, subsequent line items renumbered. 2) Page 4 of 16: Parts List (Quantity for One Boat): Item No. 12 (formerly Item No. 11 on DRAFT Copy): Requirement for Plate 1/4 Thk changed to Plate 3/8 Thk. 3) Page 5 of 16: Parts List (Quantity for One Boat): Item No. 13: "Angle, 2 X 2 X 2 3/16" inserted, subsequent line items renumbered. 4) Page 5 of 16: Parts List (Quantity for One Boat): Item No. 14: "Screw, Mach, Flat Hd, Phillips, 8-32UNC-2A X 1 1/4 LG" quantity increased from 8 to 16. 5) Page 5 of 16: Parts List (Quantity for One Boat): Item No. 15: "Washer, Flat, No. 8" quantity increased from 8 to 16. 6) Page 5 of 16: Parts List (Quantity for One Boat): Item No. 16: "Nut, Hex, 8-23UNC-3B Self Locking w/ Nylon Insert" quantity increased from 8 to 16. 7) Page 5 of 16: Parts List (Quantity for One Boat): Item No. 17: "Bolt, Hex Hd, 1/4-20UNC-2A X 1 1/2 Lg" quantity decreased from 14 to 8. 8) Page 5 of 16: Parts List (Quantity for One Boat): Item No. 18: "Bolt, Hex Hd, 1/4-20UNC-2A X 1 Lg "inserted, subsequent line items renumbered. 9) Page 5 of 16: Parts List (Quantity for One Boat): Item No. 19: "Washer, Flat, 1/4 Nominal" quantity increased from 28 to 34. 10) Page 5 of 16: Parts List (Quantity for One Boat): Item No. 20: "Nut, Hex, 1/4-20UNC-3B Self Locking w/ Nylon Insert" inserted (last item). 11) Plan 7-A: "13" added to upper right corner. 12) Plan 7-A: Center of Drawing: Detail 14-A changed to Detail 15-A; Detail 15-A changed to Detail 16-A; Detail 13-A changed to Detail 14-A. 13) Plan 7-A: "A1" and "13" added to lower right corner. 14) Plan 7-A: Bottom Center of Drawing, Under "Plan 7-A:" Details 14-A & 15-A changed to 15-A & 16-A. 15) Section 8-A: two "1 RAD" holes added to lower center of drawing. 16) Section 9-A: Call-Out Detail added to lower right side of drawing with detail specifications. 17) Section 10-A: Circled numbers on drawing changed. 18) Section 10-A: "13/64 Dia Hole Tap for 1/4-20UNC-2A Threads Temp Locations (3 Places)" removed from drawing. 19) Detail 11-A: Part length in upper right changed from 14 to 12. 20) Detail 11-A: Part dimensions added to part in lower right corner. 21) Detail 12-A: "Chock Fabrication" changed to "Blower Mount Fabrication" 22) Section 13-A added. 23) Sections 13-A, 13-B and 13-C changed to 14-A, 14-B and 14-C. 24) Detail 14-A changed to Detail 15-A. 25) Detail 15-A (new): Circled numbers changed. 26) Detail 15-A changed to Detail 16A. THE PERIOD PERMITTING REQUESTS FOR INFORMATION IS NOW CLOSED - NO NEW QUESTIONS WILL BE ANSWERED.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSEA/N62799/N4523A-17-R-0023/listing.html)
- Place of Performance
- Address: Contractor's facility located within the greater Puget Sound area, and not more than 65 nautical miles from Naval Base Kitsap, Bangor, WA., Silverdale, Washington, 98383, United States
- Zip Code: 98383
- Zip Code: 98383
- Record
- SN04400875-W 20170215/170214100849-f14bddbb7f8232d758b030d4e7fde8f9 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |