SOLICITATION NOTICE
31 -- Bearing Inserts - Exhibit A
- Notice Date
- 3/8/2017
- Notice Type
- Cancellation
- NAICS
- 333613
— Mechanical Power Transmission Equipment Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, P O Box 3990, Columbus, Ohio, 43218-3990, United States
- ZIP Code
- 43218-3990
- Solicitation Number
- SPMYM-17-Q-3015
- Archive Date
- 4/4/2017
- Point of Contact
- Rachel J. McCluskey, Phone: 207-438-6818
- E-Mail Address
-
rachel.mccluskey@navy.mil
(rachel.mccluskey@navy.mil)
- Small Business Set-Aside
- N/A
- Description
- Exhibit A This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR Subpart 12.6 and FAR Subpart 13.5, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted on both FEDBIZOPPS ( https://www.fbo.gov/ ). The RFQ number is SPMYM3-17-Q-3015. This solicitation documents and incorporates provisions and clauses in effect through FAC 2005-95 and DFARS Change Notice 20161222. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm. The NAICS code is 333613 and competition is unrestricted. DLA Maritime - Portsmouth, Kittery, ME Contracting Office requests responses from qualified sources capable of providing: CLIN 0001: Bearing Inner Insert Half, 1.021 Inches Thick x 26.990 Inches Long. Must meet the requirements of MIL-DTL-17901C. QPL-17901-QPD Applies. Duramax Marine P/N 876652132-1. CLIN 0002: Bearing Inner Insert Half, 1.021 Inches Thick x 26.990 Inches Long. Must meet the requirements of MIL-DTL-17901C. QPL-17901-QPD Applies. Duramax Marine P/N 876652132-2. CLIN 0003: Data Requirements (Exhibit A): CDRL DI-MISC-81356A (Certificate of Compliance). Please include in cost of line item if possible. Note: Receipt Inspection will inspect the insert thickness to confirm thickness. Tolerance: 1.014" to 1.025" thick. THIS MATERIAL IS A QPL ITEM. VENDORS MUST BE PROVIDING AN ITEM THAT IS MANUFACTURED BY AN APPROVED QPL SOURCE. Delivery Location is Portsmouth Naval Shipyard, Receiving Officer, Bldg 170, Code 501.2, Kittery, ME 03904. Responsibility and Inspection: unless otherwise specified in the order, the supplier is responsible for the performance of all inspection requirements and quality control. The following FAR provision and clauses are applicable to this procurement: FAR clauses: 52.202-1, 52.203-3, 52.203-6, 52.204-7, 52.204-13, 52.209-2, 52.209-5, 52.211-14, 52.211-15, 52.211-17, 52.212-1, 52.212-2, 52.212-3, 52.212-4, 52.212-5, 52.216-1, 52.216-22, 52.216-27, 52.217-6, 52.217-9, 52-219-8, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.222-40, 52.222-54, 52.223-11, 52,223-18, 52.225-13, 225.227-7015, 52.232-18, 52.232-39, 52.232-40, 52.233-1, 52.233-2, 52.242-13, 52.242-15, 52.242-17, 52.246-1, 52.247-34, 52.252-1, 52.252-2, 52.252-5, 52.252-6, and 52.253-1. Under Clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items including: 52.203-6, 52.204-10, 52.209-6, 52.209-10, 52.217-4, 52.219-4, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.222-40, 52.222-50, 52, 223-11, 52.223-18, 52.225-13, 52.232-33, 52.233-3, 52.233-4 Additional contract terms and conditions applicable to this procurement are: DFARS Clauses: 252.203-7000, 252.203-7002, 252.203-7005, 252.204-7003, 252.204-7004 (ALT A), 252.204-7006, 252.204-7011, 252.204-7012, 252.204-7015, 252.209-7004, 252.215-7008, 252.223-7008, 252.225-7002, 252.225-7012, 252.225-7015, 252.225-7021, 252.232-7003, 252.232-7006, 252.232-7010, 252.243-7001, 252.243-7002, 252.244-7000, and 252.247-7023. DLAD Clauses: 52.211-9014, 52.211-9020, 52.211-9023, 52.215-9023, 52.233-9001, and 52.247-9012. Local PNSY Clauses: YM3 A3, YM3 C500, YM3 C501, YM3 C528, YM3 D2, YM3 D4, YM3 D8, YM3 E2, and YM3 F500. This announcement will close at 10:00 AM EST on March 20, 2017 Evaluation Criteria is Lowest Price Technically Acceptable (LPTA) however, PPIPRS/FAPPIS will be used to screen for vendor responsibility. Potential contractors will be screened for responsibility in accordance with FAR 9.104. Contact Rachel McCluskey at 207-438-6818/Rachel.McCluskey@navy.mil. All responsible sources may submit a quote which shall be considered by the agency. To be awarded on an All or None basis. Receipt confirmation of quotation is the vendor's responsibility and can be obtained by calling Rachel McCluskey at 207-438-6818 or email inquiry to Rachel.mccluskey@navy.mil. System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed on-line at http://www.sam.gov/. Wide Area Work Flow (WAWF). Quoter's must be registered in WAWF to be considered for award unless government purchase card is utilized for procurement. Registration can be completed on-line at https://wawf.eb.mil. The WAWF Assistance Line is also available at 1-866-618-5988. All quotes shall include price(s) FOB Destination, a point of contact, name, email, fax, and phone number, GSA contract number if applicable, business size, country product of origin, place of manufacture, delivery time, payment terms, if registered in WAWF and/or if quoter accepts payment by Government Purchase Card. Quoters shall include a completed copy of 52.212-3 and its ALT I with quotes unless vendor is registered in SAM. If registered, please so state on quote and affirm representations and certifications are up to date. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements. When submitting a quote it is very important that all offerors understand it is their responsibility to ensure they meet all requirements of the RFQ, not just those requirements stated in the specification such as terms and conditions, representations and certifications. The quote should not simply rephrase or restate the Government's requirements, but rather shall provide substantiation as to how the offeror intends to meet the requirements. ******* End of Combined Synopsis/Solicitation *******
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPMYM-17-Q-3015/listing.html)
- Place of Performance
- Address: Kittery, Maine, 03904, United States
- Zip Code: 03904
- Zip Code: 03904
- Record
- SN04428328-W 20170310/170308234908-8b375df75ba6a656de68a2dc26e4b041 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |