MODIFICATION
72 -- Mattresses and Installation
- Notice Date
- 3/10/2017
- Notice Type
- Modification/Amendment
- NAICS
- 337910
— Mattress Manufacturing
- Contracting Office
- Department of the Navy, United States Marine Corps, MCB Camp Lejeune - RCO, PO Box 8368, MCB Camp Lejeune, North Carolina, 28547-8368, United States
- ZIP Code
- 28547-8368
- Solicitation Number
- M6700117Q1089
- Point of Contact
- Jean E. Wagnac, Phone: 9104513018
- E-Mail Address
-
jean.wagnac@usmc.mil
(jean.wagnac@usmc.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- (a) The Government will award a contract resulting from this solicitation to the responsible quoter whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. This is a request for Brand Name or Equal, open market quotes for Mattresses and Installation. The proposed acquisition is reserved 100% for Small Business. The associated North American Industrial Classification System (NAICS) code for this requirement is 337910 and the size standard is 500. BASIS OF AWARD. The Government will solicit and award this contract in accordance with FAR Part 13, Simplified Acquisition Procedures. It is the Government's intention to issue a single firm-fixed price contract on an "all or none" basis for all Mattresses and Installation. The Best Value approach for this acquisition will be lowest price technically acceptable (LPTA). Non-price factors of the quotation are evaluated to determine which quotations are technically acceptable and award is made to the quoter of the technically acceptable quotation with the lowest price. EVALUATION. Quoters will be evaluated on the following factors: Technical Acceptability. Technical acceptability will be evaluated in accordance with solicitation requirements to meet or exceed the Brand Name or Equal salient characteristics of the following determination factors: -Width: 36 Inches to 38 Inches -Length: 78 Inches to 80 Inches -Thickness: 8 Inches to 9 Inches Provide two-sided Twin XL mattress with 364 double, heat-tempered steel, Bonnell innerspring coils (min 280 coil count) each coil with minimum one turn per inch -Min gauge 13.00 -Edge support with 6-gauge minimum border wire secured to the outer row of perimeter coils by helicals to protect the edges from premature breakdown -Wire border must be butt-welded at ends (support seating usage) -All sides shall be completely enclosed with adequate padding so no sharp edges or coils can be felt through sides -Smooth, dark- colored, outer-cover of breathable, soft, and comfortable polyurethane-coated nylon fabric or similar Polybrominated Diphenyl Ether (PDBE) and Polyvinyl Chloride (PVC) material -Tape edge seams to resist raveling and zippering if stitches are broken or cut -Mattress shall have a bonded, flame resistant and insulation pad or fire retardant fiber (laminated to the outer cover) on top and bottom as a fire barrier -Beneath the fire barrier, a minimum of 1.5 in thick High Resilience (HR) polyurethane high density foam (one piece) with an unfilled density of at least 1.5 pounds per cubic foot and minimum Indentation Load Deflection (ILD) of 30 on both sides of mattress - Product must be fluid proof, hypoallergenic, bug resistant, antimicrobial, antistatic, crack resistant, and flame retardant - Meet CPSC 16 CFR 1632 and 16 CFR 1633 -WARRANTY: Minimum of 10 year warranty (years 1-5 non-prorated and years 6-10 prorated) to cover manufacturer defects during normal wear and usage. Coverage shall include any damage to bedding material/cover, under normal wear and proper handling that result in the material/cover to split, crack, or collapse. Mattresses will not shipped in a compressed state. Delivery and/or Period of Performance. Quoter has clearly demonstrated ability and capability to provide 90 Days After Receipt of Award; and Price. Quoter's initial quote contains shipping, the best terms from a price and technical standpoint. The Government intends to evaluate quotes and award a contract without discussions with vendors. Vendors should not expect requests for clarification or additional information from the Government. Therefore, the vendor's initial quote should contain the vendor's best terms from a price and technical standpoint. However, the Government reserves the right to conduct clarification and/or discussions with vendors if later determined by the Contracting Officer to be necessary and in the best interest to the Government. The Government may reject any or all quotes if such action is in the public interest and may waive informalities and minor irregularities in quotes received. SUBMISSION REQUIREMENTS. Questions shall be sent via email to Mr. Jean Wagnac at jean.wagnac@usmc.mil no later than Tuesday, March 14, 2017, 10:00AM Eastern Standard Time. All questions will be answered via amendement to the solicitation. No questions will be taken after the specified date. Quotes related to this RFQ shall be received by the Contracting Department by the date and time indicated in block 8 on the front page of the solicitation to be considered for award. The information submitted shall be clear and legible (Note: repetitively copied data loses its clarity and legibility.) Quotes may be submitted via email to: jean.wagnac@usmc.mil. It is solely the Contractor's responsibility to ensure quotes are received within the required timeframe. Submission of quotation shall include the following: Technical description of the items/services being offered in sufficient detail to evaluate compliance with the requirement in the solicitation, include product literature or other documents. Clearly state quoter can meet the delivery date. Price for all items/services inclusive of shipping and open market pricing. Quoter is registered and current in System for Award Management if not complete FAR Provision 52.212-3 annotating changes. Clearly state delivery is FOB Origin. Provide quoter's Cage Code and DUNS.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/USMC/M67001/M6700117Q1089/listing.html)
- Place of Performance
- Address: 1116 Birch Street, Camp Lejeune, North Carolina, 28542, United States
- Zip Code: 28542
- Zip Code: 28542
- Record
- SN04431238-W 20170312/170310234306-5b8c63891ff1795178942d781e763924 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |