SOLICITATION NOTICE
71 -- Workstations - Solicitation
- Notice Date
- 3/14/2017
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 337214
— Office Furniture (except Wood) Manufacturing
- Contracting Office
- Department of the Army, Army Contracting Command, ACC - APG (W911QX) Adelphi, 2800 POWDER MILL RD, ADELPHI, Maryland, 20783-1197, United States
- ZIP Code
- 20783-1197
- Solicitation Number
- W911QX-17-T-0099
- Archive Date
- 4/3/2017
- Point of Contact
- Crystal L. Demby, Phone: 3013945332
- E-Mail Address
-
crystal.l.demby.civ@mail.mil
(crystal.l.demby.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- Provision and Clauses Solicitation COMBO SYNOPSIS SOLICITATION FOR COMMERCIAL ITEMS 1. Class Code: 71 2. NAICS Code: 337214 3. Subject: Qty. Thirteen (13) workstations with additional conference seating 4. Solicitation Number: W911QX-17-T-0099 5. Set-Aside Code: N/A 6. Response Date: Five (5) Days After Posting 7. Place of Delivery/Performance: U.S. Army Research Laboratory Army Research Laboratory 2800 Powder Mill Road Adelphi, MD 20783-1145 8. (i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. (ii) The solicitation number is W911QX-17-T-0099. This acquisition is issued as a Request for Quote (RFQ). (iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-95, Effective 19 Jan 2017. (iv) The associated NAICS code is 337214. The small business size standard is 1,000 Employees. (v) The following is a list of contract line item number(s) and items, quantities and units of measure, (including option(s), if applicable): CLIN 0001 The Contractor shall provide and install qty. thirteen (13) workstations with additional conference seating in a pre-existing area located in the Zahl Building 207, Room 4D-55 at the Army Research Laboratory (ARL), in accordance with the Salient Characteristics, QTY One (1) Job. (vi) Description of requirements: Please see the Salient Characteristics, in accordance with Sections C.1 through C.3.3, below. Salient Characteristics C.1 OBJECTIVE C.1.1 The Contractor shall design and install thirteen (13) workstations to include conference seating in a pre-existing area located in the Zahl Building 207, Room 4D-55 at the Army Research Laboratory (ARL), 2800 Powder Mill Road, Adelphi, MD 20783 based on the Government's minimum requirements as stated in sections C.2 and C.3. C.2 REQUIREMENTS The Government requires quantity (qty.) thirteen (13) workstations to be used in one (1) pre-existing area of a Government office building. Workstations one (1) through six (6), will be grouped adjacently and shall be placed on one side of Room 4D-55; five (5) other workstations (Workstations seven (7) through eleven (11)), will be grouped as a cluster and shall be placed on the opposite side of Room 4D-55. The remaining two (2) workstations shall be placed in a separate area of Room 4D-55. The Contractor shall ensure that each workstation meets the following minimum requirements: C.2.1 PANELS C.2.1.1 The Contractor shall provide fabric-covered panels to make up the walls of each workstation. Workstations one (1) through six (6) shall have each of the following amount of panels and respective specifications regarding measurements: • Five (5) panels, 36" width (w) by 50" height (h) • Two (2) panels, 24"w by 50"h • One (1) panel, 30"w by 50"h • One (1) panel, 48"w by 65"h Workstations seven (7) through eleven (11) shall have each of the following amount of panels and respective specification regarding measurements: • One (1) panel, 24"w by 50"h • One (1) panel, 30"w by 50"h • Three (3) panels, 36"w by 50"h • One (1) panel, 48"w by 65"h None of the aforementioned panels shall have a diameter of more than three (3) inches. C.2.1.2 The Contractor shall provide leveling glides for the panels. The leveling glides shall have no more than a three (3) inch height adjustment. C.2.1.3 Each panel shall have cable raceways with an area of two and five-eighths inches (2 5/8"). These raceways shall have the capability to encase large volumes of data and electrical cabling on the side of the panels. Each raceway shall be made of steel and placed horizontally on the panels, with vertical cable and electrical routing capacity. C.2.2 SLIDING WORKSTATION DOOR PANELS C.2.2.1 The Contractor shall provide six (6) sliding workstation door panels with frosted translucent inserts for Workstations one (1) through six (6). These sliding workstation panels shall be 65 inches in height by 42 inches in width. C.2.2.2 Each sliding workstation door panel shall have two (2) rolling casters attached to the bottom of the frame for the purpose of enclosing its respective workstation, as necessary. C.2.3 PANEL-MOUNTED FRAMELESS GLASS STACKERS C.2.3.1 The Contractor shall provide frameless frosted glass insert stackers to be integrated into the tops of each base panel to frame the trim for Workstations one (1) through eleven (11). The frosted glass stackers shall measure 42 inches in width by 15 inches in height, and be no more than three-eights inches (3/8") thick. C.2.4 OVERHEAD STORAGE COMPARTMENTS C.2.4.1 The Contractor shall provide eleven (11) steel cabinet overhead storage compartments for workstations one (1) through eleven (11) measuring 15 inches in height by 48 inches in width with a depth (d) of 14.5 inches. C.2.4.2 Each of the overhead storage compartments shall be mounted to a panel measuring 48 inches in width by 65 inches in height, in accordance to C.2.1.1. C.2.4.3 Each of the compartments shall include a backstop, an easy-assist door, and a self-engaging safety latch to secure the cabinet to each of the panel. Each compartment will have the capability of locking with keys provided by the Contractor. C.2.4.4 The Contractor shall provide light-emitting diode (LED) task lights to be placed underneath each of the overhead storage compartments with each task light measuring 31 inches in length. C.2.5 TASK SEATING CHAIRS C.2.5.1 The Contractor shall provide eleven (11) task seating chairs for workstations one (1) through eleven (11). Each task chair shall have a titanium-finished frame with a mesh back, black dual-wheel hard casters, upholstered seats, adjustable arms, and ergonomic support. Each chair shall be able to tilt, lock, and recline with tension, and be capable of pneumatic adjustment with multi-surface casters. C.2.6 WORKSTATION DESKS C.2.6.1 The Contractor shall provide thirteen (13) work station desktops in total (eleven (11) for work stations one (1) through eleven (11) and an additional two (2) to be placed in a separate area of Room 4D-55). The desktops shall measure 72 inches in width by 30 inches in length with a 24 inch by 48 inch return. The surface of each desktop shall have a 3mm flat edge woodgrain laminate top and the legs of each desktop shall be a platinum metallic color. C.2.6.2 The Contractor shall provide thirteen (13) mobile box file pedestals (eleven (11) for work stations one (1) through eleven (11) and an additional two (2) to be placed in a separate area of Room 4D-55) in a platinum metallic color, with each measuring 24 inches in width by 48 inches in height by 24 inches in depth. C.2.6.3 The Contractor shall provide eleven (11) under return lateral file cabinets for work stations one (1) through eleven (11) in a platinum metallic color, with each measuring 30 inches in width by 28 inches in height by 18 inches in depth. C.2.6.3 The Contractor shall provide eleven (11) storage and wardrobe cabinets for work stations one (1) through eleven (11) in a platinum metallic color, with each measuring a standard 48.5 inches in height. C.2.6 CONFERENCE SEATING In a separate area of Room 4D-55, the Government requires the following minimum requirements: C.2.6.1 The Contractor shall provide five (5) conference seating chairs with black dual-wheel hard casters, low back, upholstered mesh seats, fixed arms, and a pivot back to be placed around a round conference table, provided by the Contractor, and referenced in C.2.6.2. C.2.6.2 The Contractor shall provide one (1) round table with a 3mm flat edge woodgrain laminate top capable of sitting five (5) conference seating chairs, in accordance with C.2.6.1. C.2.6.3 The Contractor shall provide one (1) conference table, rectangular in shape, measuring 24 inches in width by 60 inches in length. The table shall have a 3mm flat edge woodgrain laminate top and the legs of the conference table shall be a platinum metallic color. C.2.7 ADJUSTABLE HEIGHT MECHANISMS The Contractor shall provide thirteen (13) adjustable height mechanisms for each of the required thirteen (13) workstations. These adjustable height mechanisms shall allow users to stand at a comfortable level while working at respective computer display setups, as necessary. C.3 DELIVERY / INSTALLATION / FACILITY ACCESS C.3.1 The Contractor shall furnish all labor, tools and supplies to perform successful installation of the thirteen (13) workstations as well as all requirements specified in section C.2 of this PWS at the Army Research Laboratory located in Adelphi MD between the hours of 0800 and 1630, Monday through Friday, excluding Federal holidays. C.3.2 Contractor employees and all associated sub-contractor employees shall comply with applicable installation, facility and area commander installation/facility access, and local security policies and procedures (provided by the Technical Point of Contact (TPOC) as Government Furnished Information (GFI) at contract start date or effective date of incorporation of this requirement into the contract, whichever is applicable) such as wearing of ID Badges, etc. The Contractor shall also provide all information locally required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements as directed by the TPOC based on Department of Defense (DOD), Headquarters, Department of the Army (HQDA), and/or local policy. In addition to the changes otherwise authorized by the changes clause of the contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the TPOC may require changes in Contractor security matters or processes. During FPCON Charlie and Delta and other required postures such a Lockdown, Shelter In Place (SIP) or Evacuation, Contractor employees will resume work as soon as possible after the FPCON has been lowered or the posture returned to normal operations. This pertains to real situations and exercises. C.3.3 Contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification Index (NCIC-III) and Terrorist Screening Database (TSDB) (Army Directive 2014-05/AR 190-13), applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative), or, at OCONUS locations, in accordance with status of forces agreements and other theater regulations. (vii) Delivery is required by eight weeks ARO. Delivery shall be made to U.S. Army Research Laboratory, Adelphi, MD. Acceptance shall be performed at U.S. Army Research Laboratory, Adelphi, MD. The FOB point is U.S. Army Research Laboratory, Adelphi, MD. (viii) The provision at 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The following addenda have been attached to this provision: None. (ix) The provision at FAR 52.212-2, Evaluation - Commercial Items is applicable to this acquisition. The specific evaluation criteria to be included in paragraph (a) of that provision are as follows: Lowest Price Technically Acceptable (LPTA) (x) Offerors shall include a completed copy of the provision at FAR 52.212-3 (with its Alternate I), Offeror Representations with its offer. (xi) The clause at 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following addenda have been attached to this clause: None. (xii) The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items and the selected clauses listed in DFARS 212.301 Solicitation provisions and Contract Clauses for the Acquisition of Commercial Items, applies to this acquisition. The following additional FAR/DFARS clauses cited in this clause are applicable: 52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST TIER SUBCONTRACT AWARDS (JULY 2013) 52.209-6 PROTECTING THE GOVERNMENT' INTEREST WHEN SUBCONTRACTING WITH CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT (AUG 2013) 52.219-4 NOTICE OF PRICE EVALUATION PREFERENCE FOR HUBZONE SMALL BUSINESS CONCERNS (OCT 2014) 52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JUL 2013) 52.222-3 CONVICT LABOR (JUN 2003) 52.222-19 CHILD LABOR--COOPERATION WITH AUTHORITIES AND REMEDIES (JAN 2014) 52.222-21 PROHIBITION OF SEGREGATED FACILITIES (FEB 1999) 52.222-26 EQUAL OPPORTUNITY (MAR 2007) 52.222-36 AFFIRMATIVE ACTION FOR WORKERS WITH DISABILITIES (JUL 2014) 52.222-50 COMBATING TRAFFICKING IN PERSONS (FAR 2015) 52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (AUG 2011) 52.225-13 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JUN 2008) 52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER-OTHER THAN CENTRAL CONTRACT REGISTRATION (JULY 2013) 52.232-36 PAYMENT BY THIRD PARTY (MAY 2014) APG-ADL-I.5152.212-4401 DFARS COMMERCIAL ACQUISITION PROVISIONS AND CLAUSES (OCT 2015) [Local Adelphi Clause] 52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (JUL 2015) 52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (JUL 2015) 52.204-21 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS (JUN 2016) 52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS 252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (SEP 2011) 252.204-7000 DISCLOSURE OF INFORMATION 252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (SEP 2015) 252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (JUN 2012) 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS 252.204-0007 Contract-wide: Sequential ACRN Order. (SEP 2009) (xiii) The following additional contract requirement(s) or terms and conditions apply (full text of all FAR/DFARS clauses that contain fill-in information, as well as all local clauses, can be found in the attached Provisions and Clauses Full-Text document): 252.203-7005 REPRESENTATION RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (NOV 2011) 252.204-7008 COMPLIANCE WITH SAFEGUARDING COVERED DEFENSE INFORMATION CONTROLS (AUG 2015) 252.204-7011 ALTERNATIVE LINE ITEM STRUCTURE (SEP 2011) 252.204-7015 DISCLOSURE OF INFORMATION TO LITIGATION SUPPORT CONTRACTORS (FEB 2014) 252.211-7003 ITEM IDENTIFICATION AND VALUATION (JUN 2013) 252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (MAY 2011) 252.225-7000 BUY AMERICAN STATUTE-BALANCE OF PAYMENTS PROGRAM CERTIFICATE (JUN 2012) 252.225-7001 BUY AMERICAN ACT AND BALANCE OF PAYMENTS PROGRAM (DEC 2012) 252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006) 252.244-7000 SUBCONTRACTS FOR COMMERCIAL ITEMS (JUN 2013) 252.247-7023 TRANSPORTATION OF SUPPLIES BY SEA (MAY 2002) Full Text Clauses ACC - APG POINT OF CONTACT TECHNICAL POINT OF CONTACT TYPE OF CONTRACT (Reference: 52.216-1) NON-PERSONAL SERVICES GOV INSPECTION AND ACCEPTANCE SUPERVISION OF EMPLOYEES WORK HOURS GOVERNMENT-CONTRACTOR RELATIONSHIPS PAYMENT OFFICE (BANKCARD) RECEIVING ROOM - ALC USE OF GOV'T FACILITIES APG-ADL-I.5152.212-4401 DFARS COMMERCIAL ACQUISITION PROVISIONS AND CLAUSES (OCT 2015) [Local Adelphi Clause] ADELPHI CONTRACTING DIVISION WEBSITE PAYMENT TERMS 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE 52.252-2 CLAUSES INCORPORATED BY REFERENCE 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS 252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION 252.203-7994 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements-Representation 252.203-7995 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS (xiv) This acquisition is rated under the Defense Priorities and Allocations System (DPAS) as N/A. (xv) The following notes apply to this announcement: None. (xvi) Offers are due five (5) days after posting by 11:59pm EST to crystal.l.demby.civ@mail.mil or lindsay.n.sayers.ctr@mail.mil. (xvii) For information regarding this solicitation, please contact Crystal Demby, 301-394-5332, crystal.l.demby.civ@mail.mil or Lindsay Sayers, 301-394-2382, lindsay.n.sayers.ctr@mail.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/9628089a4c771ffd1ff50014392fde17)
- Place of Performance
- Address: U.S. Army Research Laboratory, Adelphi, Maryland, 20783, United States
- Zip Code: 20783
- Zip Code: 20783
- Record
- SN04434801-W 20170316/170314234728-9628089a4c771ffd1ff50014392fde17 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |