SOURCES SOUGHT
66 -- PERISCOPE, ARMORED VEHICLE. - Package #1
- Notice Date
- 3/23/2017
- Notice Type
- Sources Sought
- NAICS
- 333314
— Optical Instrument and Lens Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime - BSM, P O Box 3990, Columbus, Ohio, 43216-5000, United States
- ZIP Code
- 43216-5000
- Solicitation Number
- CL15281001
- Archive Date
- 4/15/2017
- Point of Contact
- Tracy S. Roberts, Phone: 6146922714
- E-Mail Address
-
Tracy.Roberts@dla.mil
(Tracy.Roberts@dla.mil)
- Small Business Set-Aside
- N/A
- Description
- Please review the NSN below and provide any sources that may be able to manufacture this item. Also see market survey attached. This information must be provided by the response date to Tracy.Roberts@dla.mil. 6650-01-317-9138 PERISCOPE, ARMORED VEHICLE. Unit of issue is EA with EA = 1 item. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS) RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RT001: MEASURING AND TEST EQUIPMENT SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. MIL-STD-130N(1) DATED 16 NOV 2012. IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). THE COLOR OF THIS PART IS GREEN 34094 TO FED-STD-595. CONTRACTOR FAT APPLIES. PER FAR 52.209-3: (A) THE CONTRACTOR SHALL TEST 6 UNIT(S) AT LEAST 10 CALENDAR DAYS BEFORE THE BEGINNING OF FIRST ARTICLE TESTING, THE CONTRACTOR SHALL NOTIFY THE PCO. (B) THE CONTRACTOR SHALL SUBMIT THE FAT REPORT WITHIN 90 CALENDAR DAYS (NOTE: THE DELIVERY SCHEDULE ON THE FACE OF THE SOLICITATION REFLECTS ONLY THE TIME TO DELIVER THE SUPPLIES.) WITHIN 30 CALENDAR DAYS AFTER THE GOVERNMENT RECEIVES THE FIRST ARTICLE THE CONTRACTING OFFICER SHALL NOTIFY# DLAD PROC NOTE E01 - SUPPLEMENTAL FIRST ARTICLE EXHIBIT DISPOSITION - CONTRACTOR MAINTAINED. *THE CONTRACTOR SHALL RETAIN ALL FIRST ARTICLE UNITS AS PRODUCTION STANDARDS#. ENGINEERING EXCEPTIONS DATA: TO ALL APPLICABLE DRAWINGS WITHOUT DISTRIBUTION STATEMENTS: ADD DISTRIBUTION 'C' MIL-E-12397 MAY BE USED FOR THIS PROCUREMENT. EL 7043543: REPLACE "7680600" WITH "MIL-C-675" DWG 7674952, NOTE 2, CHANGE: FROM: "...GRADE A OR C, SPEC P-L-391 MATERIAL..." TO: "...GRADE A OR C, SPEC L-P-391 MATERIAL..." TDPL: DOCUMENT ADD DELETE REPLACE ASTM A366/A366M -- XX ASTM A109 MIL-C-46168 -- XX MIL-DTL-53039 P-L-391 -- XX -- L-P-391 XX -- -- MIL-C-675 XX -- -- END ENGINEERING EXCEPTIONS CRITICAL APPLICATION ITEM IAW BASIC DRAWING NR 19200 12357918 REVISION NR P DTD 04/09/1999 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12357797 REVISION NR E DTD 11/27/1996 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12579607 REVISION NR C DTD 08/04/2009 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 10940477 REVISION NR D DTD 11/27/1996 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 7680606 REVISION NR W DTD 06/22/1998 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 7641866 REVISION NR U DTD 03/19/2015 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 7680600 REVISION NR H DTD 03/29/1993 PART PIECE NUMBER: IAW REFERENCE STD NR MIL-STD-129R REVISION NR R DTD 02/18/2014 PART PIECE NUMBER: IAW REFERENCE STD NR MIL-STD-130N(1) REVISION NR N DTD 11/16/2012 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 7043539 REVISION NR F DTD 01/25/1999 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 7043543 REVISION NR E DTD 08/10/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 7043543 REVISION NR DTD 12/09/1954 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 7048694 REVISION NR K DTD 01/09/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 7674952 REVISION NR E DTD 08/14/2007 PART PIECE NUMBER: IAW REFERENCE QAP 19207 12357797 REVISION NR C DTD 01/11/1999 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12357796 REVISION NR F DTD 08/19/1997 PART PIECE NUMBER: IAW REFERENCE QAP 19200 12357796 REVISION NR A DTD 06/07/1999 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12357918 REVISION NR DTD 01/10/2013 PART PIECE NUMBER: IAW REFERENCE QAP 19200 12357918 REVISION NR B DTD 01/11/1999 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12357918 REVISION NR DTD 10/07/1999 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12357793 REVISION NR F DTD 05/19/1998 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12357918 REVISION NR E DTD 02/19/2002 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 10940477 REVISION NR D DTD 11/27/1996 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 10940477 REVISION NR D DTD 10/24/2012 PART PIECE NUMBER:
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC-BSM/CL15281001/listing.html)
- Record
- SN04445484-W 20170325/170323234717-f7d45d8a7d745aff2918e52ed7ee614a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |