SOURCES SOUGHT
J -- MMIII PDM LER Cadmium Plating - Draft PWS and applicable Drawings.
- Notice Date
- 3/24/2017
- Notice Type
- Sources Sought
- NAICS
- 332813
— Electroplating, Plating, Polishing, Anodizing, and Coloring
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, AFLCMC / AFSC / AFNWC - HILL AFB, ., Hill AFB, Utah, 84056, United States
- ZIP Code
- 84056
- Solicitation Number
- FA8224-17-R-CADPLAT
- Point of Contact
- Kyle Kozlowski, Phone: 8015860705, Jesse Ball, Phone: 8017775539
- E-Mail Address
-
kyle.kozlowski@us.af.mil, jesse.ball.1@us.af.mil
(kyle.kozlowski@us.af.mil, jesse.ball.1@us.af.mil)
- Small Business Set-Aside
- N/A
- Description
- Drawings for MSS Parts for Plating. This is the Support 990572-1 drawings. Drawings for MSS Parts for Plating. This is the Setscrew Assy 990516-9 drawings. Drawings for MSS Parts for Plating. This is the Packing nut 990607-1 drawings. EO drawings for MSS Parts for Plating. This is the Packing nut 990606-1 EO drawings. Drawings for MSS Parts for Plating. This is the Packing nut 990606-1 drawings. Drawings for MSS Parts for Plating. This is the Locking plate valve 990503-1 drawings. Drawings for MSS Parts for Plating. This is the Block 29-48023 drawings. Drawings for MSS Parts for Plating. This is the Bearing sleeve packing nut 990070-3 drawings. Drawings for LER Parts for Plating. This is the Upper gland nut 25-66755 drawings. Drawings for LER Parts for Plating. This is the Stop nut 29-46939 drawings. Drawings for LER Parts for Plating. This is the Spacer 29-46939 drawings. Drawings for LER Parts for Plating. This is the Lower locking ring 29-46926 drawings. Drawings for LER Parts for Plating. This is the Lower gland nut 25-66754 drawings. Drawings for LER Parts for Plating. This is the Locking plate 29-46936 drawings. Drawings for LER Parts for Plating. This is the Cylinder 25-66853 drawings. Drawings for LER Parts for Plating. This is the Cable Locking Ring 29-47385 drawings. Drawings for LCC Wing 3-5 Parts for Plating. This is the Spring guide 1269-18A. Drawings for LCC Wing 3-5 Parts for Plating. This is the Pressure tank cap 1269-1A. Drawings for LCC Wing 3-5 Parts for Plating. This is the Piston Rod 1269-4A. Drawings for LCC Wing 3-5 Parts for Plating. This is the Head Piston 1269-3A. Drawings for LCC Wing 3-5 Parts for Plating. This is the Gland Nut 169-48A. Drawings for 36 Blast Valve Parts for Plating EO for 300-40565. EO for 300-40564. EO for 300-40563. EO for 300-40562. Eng. order for 300-40561 Eng. order for 300-40547. Eng. Order for 300-40543. Eng Order for 300-40510 Drawings for 24 Blast Valve Parts for Plating. Draft PWS 1. NOTICE: This is not a solicitation but rather a Sources Sought Synopsis to determine potential sources for information and planning purposes only. The information provided is for the Air Force's market research and is given understanding the AF has no obligation to pay for the information. The information may be used in developing a request for proposals (RFP) but does not obligate the AF to issue an RFP or contract. Any proprietary information submitted may be used as a general concept but specific information will be safeguarded as proprietary, if so marked. 1.1 The purpose of this Sources Sought is to conduct market research to determine if responsible sources exist, to assist in determining if this effort can be competitive and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 332813 which has a corresponding Size standard of 500 employees. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small businesses to include 8(a), Service-Disabled Veteran-Owned, Hubzone, and Women-Owned small business concerns. The government requests that interested parties respond to this notice if applicable and identify your small business status to the identified NAICS code. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime and the work accomplished by the teaming partners. 2. Program Details: The purpose of this project is to provide required personnel, equipment, parts, tools, materials, supervision and services necessary to provide plating services to include stripping existing coating and preparing the part prior to accomplishing the plating of various parts for the duration of the PDM for the MM III ICBM. These non-personal services will be performed at the Contractor's facility. Performed services are in support of the 309th Missiles Maintenance Group (309 MMXG), at Hill Air Force Base (HAFB), Utah. The results and capability responses to this announcement will help guide us to the most appropriate contract vehicle. 3. Response 3.1 Responses should address the following questions: 1. Does your facility have the capability to meet all size and weight requirements of parts listed in Appendix B? 2. If not, what parts in Appendix B are you able to cadmium plate? 3. Section 2.1 of the Draft Performance Work Statement (PWS) requires 10 day turnaround time of parts, are you able to meet this timeline? 4. If not, what is the minimum turnaround time needed to complete cadmium plating? 5. Do you have any suggestions for improvements on the PWS? 6. Do you have the capability to perform all requirements of the technical drawings or sub contract the portions you are not able to do, including all inspections? 3.2 The response should also include the following business information in addition to the capability statements and responses to questions above : 1) Sources Sought Number 2) DUNS Number 3) Company Name 4) Company Address 5) Company Points of Contact, Phone, FAX, and Email Address. POC's should include individual(s) who is(are) duly authorized in managing any/all technical issues and/or questions, and individual(s) who is(are) authorized in managing any/all contractual issues and/or questions. 6) Type of Company (i.e. small business, large business, educational institution, etc.) The final date to submit responses for this Sources Sought is 7 April 2017. Please submit all information to the following: AFSC OL:H/PZIMA, Attention: Kyle Kozlowski; kyle.kozlowski@us.af.mil ; Phone: (801) 586-0705
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OOALC/FA8224-17-R-CADPLAT/listing.html)
- Place of Performance
- Address: Hill Air Force Base, Hill AFB, Utah, 84056, United States
- Zip Code: 84056
- Zip Code: 84056
- Record
- SN04446827-W 20170326/170324234342-a17325baf26c9511ec40b516b9929270 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |