MODIFICATION
84 -- Gold Straps For Cadet Uniform Dress Caps-West Point
- Notice Date
- 4/10/2017
- Notice Type
- Modification/Amendment
- NAICS
- 315990
— Apparel Accessories and Other Apparel Manufacturing
- Contracting Office
- Department of the Army, Army Contracting Command, MICC, MICC - West Point, 681 Hardee Place, West Point, New York, 10996-1514, United States
- ZIP Code
- 10996-1514
- Solicitation Number
- W911SD-17-T-0264
- Archive Date
- 4/29/2017
- Point of Contact
- Sonya D. Van Valkenburg, Phone: 845-938-2217
- E-Mail Address
-
sonya.d.vanvalkenburg.civ@mail.mil
(sonya.d.vanvalkenburg.civ@mail.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- SOURCES SOUGHT This is a Sources Sought Notice ONLY. The U.S. Government has a requirement for Gold Straps for Dress Caps at West Point, NY in accordance on a small business set-aside basis, provided 2 or more qualified small businesses respond to this sources sought synopsis with information sufficient to support a set-aside. Be advised that the U.S. Government will not be able to set aside this requirement if 2 or more small businesses do not respond with information to support the set-aside. We encourage all small businesses, in all socioeconomic categories (including, 8(a) Business Development Program, Small Disadvantage Business, Historically Underutilized Business Zone, Service-Disabled Veteran-Owned, Women-Owned Small Business concerns), to identify their capabilities in meeting the requirement at a fair market price. This notice is issued solely for information and planning purposes - it does not constitute a Request for Quote (RFQ)/Invitation for Bid (IFB)/Request for Proposal (RFP) or a promise to issue an RFQ, IFB or RFP in the future. This notice does not commit the U.S. Government to contract for any supply or service. Further, the U.S. Government is not seeking quotes, bids or proposals at this time and will not accept unsolicited proposals in response to this sources sought notice. The U.S. Government will not pay for any information or administrative costs incurred in response to this notice. Submittals will not be returned to the responder. Not responding to this notice does not preclude participation in any future RFQ or IFB or RFP, if any is issued. If a solicitation is released, it will be synopsized on the Government wide Point of Entry. It is the responsibility of potential offerors to monitor the Government wide Point of Entry for additional information pertaining to this requirement. The anticipated NAICS code(s) is 315990 - Apparel Accessories and Other Apparel, Manufacturing with the associated size standard of 500 employees. A need is anticipated for the procurement of Gold Straps for Dress Caps for the United States Corps of Cadets. This was previously acquired under contract #W911SD-14-P- 0103. Specifications are attached. Upon award the finished product is required to be delivered -Date to be determined yet, a priority of delivery will be anticipated. In response to this sources sought, please provide: 1. Name of the firm, point of contact, phone number, email address, DUNS number, CAGE code, a statement regarding small business status (including small business type(s)/certifications(s) such as SDB, 8(a), HUBZone, SDVOSB, WOSB, etc.) and the corresponding NAICS code. 2. Identify whether your firm is interested in competing for this requirement as a prime contractor or not. Identify subcontracting, joint ventures or teaming arrangement that will be pursued, if any. 3. Information in sufficient detail regarding previous experience (indicate whether as a prime contractor or subcontractor) on similar requirements (include size, scope, complexity, timeframe, government or commercial), pertinent certifications, etc., that will facilitate making a capability determination. 4. Information to help determine if the requirement for STRAP, GOLD FOR DRESS CAP is commercially available, including pricing information, basis for the pricing information (e.g., market pricing, catalog pricing), delivery schedules, customary terms and conditions, warranties, etc. 5. Identify how the Army can best structure these contract requirements to facilitate competition by and among small business concerns. 6. Identify any condition or action that may be having the effect of unnecessarily restricting competition with respect to this acquisition. Please contact the MICC Advocate for Competition, Sonya Van Valkenburg, at sonya.d.vanvalkenburg.civ@mail.mil 845-938-2217, if you believe that this action is unreasonably restricting competition. Include the subject of the acquisition, this announcement, and the MICC POC information from the FedBizOpps notice. Provide the specific aspects that unreasonably restrict competition and the rationale for such conclusion. 7. Recommendations to improve the approach/specifications/draft PWS/PRS to acquiring the identified items/services. 8. Please include the solicitation number W911SD-16-T-0264 in your email response to preclude your reply being treated as JUNK or SPAM.. ' d tf. uo:_-_-_ :::_- JD-- L r L·.f JZ -() -==-==-=-·· ----- -- =·----- ) r/CI/RE -1 t• I",j'. 4- /.b. /. -.i EYELET STRAP. Cf/t/Y, IXJ(IBL£ LEATHER, GOLf) 0/? GOLfJ COLOR LACE JZ IM"h' ( SPECIFICATION Gold Strap - Cap, Dress, Cadet Revised: 31 December 2015 1. Scope: This purchase description covers the requirements for gold lace or gold colored synthetic lace chin straps used as a component on the USMA Cadet White dress caps. 2. Classification: The chin strap shall of one type in the following class, as specified. Class 2 Gold Color Nylon or Rayon Lace 3. Materials: a. Backing: The backing for the chin straps and loops shall be either leather, non-bleeding, or a suitable cloth, either in natural or light brown color, and of a good commercial grade suitable for the purpose intended. b. Gold Colored Nylon or Rayon Lace: (1) Warp and Stuffer Yarn: The warp and stuffer yarn shall be 38/2 or 40/2 mercerized cotton yarn. (2) Filling Yarn: The filling yarn shall be continuous filament 50/2 denier first quality continuous filament nylon or rayon of the regenerated cellulose, cuprammonium or viscose type, semilustre, not less than thirty (30) filaments for the single yarns. The yarns shall be free of any adulterants or weighting materials. (3) Color: The color shall be gold and shall show good fastness to wet-dry cleaning, bleaching, laundering and light. (4) Construction: The Finished gold colored nylon or rayon lace shall conform to requirements as shown in Table II. (5) Weave: The weave for the gold colored lace shall be a filling effect weave as follows: Every pick over and under. 4 ends Every pick over and under. 4 ends Every pick over and under. 24 ends Every pick over and under. 2 ends Every pick over and under. 24 ends The center warp section of 4 ends 3 times shall weave as follow: First 4 ends over and under every pick Table II Construction Class Width (inches) Number of Vellum Total Number or Ends Weight per Linear Yard (min.) (oz.) Picks per inch (min.) 1 0.5 2 128 0.20 250 Second 4 ends over 1 pick. under 1 pick over 1 pick. under 2 picks over 1 pick. under 1 pick, over 1 pick Third 4 ends over and under every pick Every pick over and under 24 ends 2 ends 24 ends 4 ends 4 ends d. Thread: The thread for stitching shall be in accordance with good commercial practice and in a color to match the gold lace or gold colored lace. e. Eyelets: The eyelet for each section shall be made of brass and in accordance with good commercial quality. 4. Design and Measurement: The design and measurements of the chin strap shall be in accordance with Figure 1. 5. Construction: Chin straps shall be made in two (2) sections, each 10-1/8 inches long, and pointed at each end. Angles at pointed ends should be between 30 and 35 degrees. Onto the leather sections shall be stitched the gold lace or gold colored lace, according to the specified class completely covering the breadth of leather strap, folded and turned under at the pointed ends of each section. Stitching should be 1/32 to 1/16 inches from edges, and eight (8) to ten (10) stitches per inch. On end of section shall be provided with an aperture, the center of which shall be equidistant from the sides and 5/16 inches from the end of the strap. Into the aperture shall be inserted a brass eyelet of ¼ inch inside diameter. The opposite end of each section shall be provided with a loop of the lace ½ inch wide, so positioned that the pointed end of the section extends 3/8 inches beyond the loop. The loop for the top section shall be stitched 1/32 to 1/16 inches from the edge, catching the top section in the stitching. The loop for the bottom section shall be stitched 1/32 to 1/16 inches from the edge catching the pointed end of strap, which has been cut off and placed under the loop edge. Loops shall be folded and hand tacked at underside of chin straps, catching the loop with a cut-off piece to the bottom chin strap section. Each section shall be made the same length so that when the strap is assembled and extended to a total length of eleven (11) inches, the edges of the loops shall be equidistant from the eyelets. 6. Quality Assurance Provisions: Inspection of the finished chin straps shall be made by the producer for compliance with this purchase description. 7. Preparation for Delivery: Packaging and packing of the chin straps shall be in accordance with good commercial practice.. ' d tf. uo:_-_-_ :::_- JD-- L r L·.f JZ -() -==-==-=-·· ----- -- =·----- ) r/CI/RE -1 t• I",j'. 4- /.b. /. -.i EYELET STRAP. Cf/t/Y, IXJ(IBL£ LEATHER, GOLf) 0/? GOLfJ COLOR LACE JZ IM"h' ( SPECIFICATION Gold Strap - Cap, Dress, Cadet Revised: 31 December 2015 1. Scope: This purchase description covers the requirements for gold lace or gold colored synthetic lace chin straps used as a component on the USMA Cadet White dress caps. 2. Classification: The chin strap shall of one type in the following class, as specified. Class 2 Gold Color Nylon or Rayon Lace 3. Materials: a. Backing: The backing for the chin straps and loops shall be either leather, non-bleeding, or a suitable cloth, either in natural or light brown color, and of a good commercial grade suitable for the purpose intended. b. Gold Colored Nylon or Rayon Lace: (1) Warp and Stuffer Yarn: The warp and stuffer yarn shall be 38/2 or 40/2 mercerized cotton yarn. (2) Filling Yarn: The filling yarn shall be continuous filament 50/2 denier first quality continuous filament nylon or rayon of the regenerated cellulose, cuprammonium or viscose type, semilustre, not less than thirty (30) filaments for the single yarns. The yarns shall be free of any adulterants or weighting materials. (3) Color: The color shall be gold and shall show good fastness to wet-dry cleaning, bleaching, laundering and light. (4) Construction: The Finished gold colored nylon or rayon lace shall conform to requirements as shown in Table II. (5) Weave: The weave for the gold colored lace shall be a filling effect weave as follows: Every pick over and under. 4 ends Every pick over and under. 4 ends Every pick over and under. 24 ends Every pick over and under. 2 ends Every pick over and under. 24 ends The center warp section of 4 ends 3 times shall weave as follow: First 4 ends over and under every pick Table II Construction Class Width (inches) Number of Vellum Total Number or Ends Weight per Linear Yard (min.) (oz.) Picks per inch (min.) 1 0.5 2 128 0.20 250 Second 4 ends over 1 pick. under 1 pick over 1 pick. under 2 picks over 1 pick. under 1 pick, over 1 pick Third 4 ends over and under every pick Every pick over and under 24 ends 2 ends 24 ends 4 ends 4 ends d. Thread: The thread for stitching shall be in accordance with good commercial practice and in a color to match the gold lace or gold colored lace. e. Eyelets: The eyelet for each section shall be made of brass and in accordance with good commercial quality. 4. Design and Measurement: The design and measurements of the chin strap shall be in accordance with Figure 1. 5. Construction: Chin straps shall be made in two (2) sections, each 10-1/8 inches long, and pointed at each end. Angles at pointed ends should be between 30 and 35 degrees. Onto the leather sections shall be stitched the gold lace or gold colored lace, according to the specified class completely covering the breadth of leather strap, folded and turned under at the pointed ends of each section. Stitching should be 1/32 to 1/16 inches from edges, and eight (8) to ten (10) stitches per inch. On end of section shall be provided with an aperture, the center of which shall be equidistant from the sides and 5/16 inches from the end of the strap. Into the aperture shall be inserted a brass eyelet of ¼ inch inside diameter. The opposite end of each section shall be provided with a loop of the lace ½ inch wide, so positioned that the pointed end of the section extends 3/8 inches beyond the loop. The loop for the top section shall be stitched 1/32 to 1/16 inches from the edge, catching the top section in the stitching. The loop for the bottom section shall be stitched 1/32 to 1/16 inches from the edge catching the pointed end of strap, which has been cut off and placed under the loop edge. Loops shall be folded and hand tacked at underside of chin straps, catching the loop with a cut-off piece to the bottom chin strap section. Each section shall be made the same length so that when the strap is assembled and extended to a total length of eleven (11) inches, the edges of the loops shall be equidistant from the eyelets. 6. Quality Assurance Provisions: Inspection of the finished chin straps shall be made by the producer for compliance with this purchase description. 7. Preparation for Delivery: Packaging and packing of the chin straps shall be in accordance with good commercial practice.. ' d tf. uo:_-_-_ :::_- JD-- L r L·.f JZ -() -==-==-=-·· ----- -- =·----- ) r/CI/RE -1 t• I",j'. 4- /.b. /. -.i EYELET STRAP. Cf/t/Y, IXJ(IBL£ LEATHER, GOLf) 0/? GOLfJ COLOR LACE JZ IM"h' (
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/23539600879fc9d24c314838806351ab)
- Place of Performance
- Address: MICC WEST POINT, 681 HARDEE PLACE, WEST POINT, New York, 10996, United States
- Zip Code: 10996
- Zip Code: 10996
- Record
- SN04466506-W 20170412/170411000102-23539600879fc9d24c314838806351ab (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |