SOURCES SOUGHT
J -- Utility Floats 25 & 28 - Sources Sought Notice
- Notice Date
- 4/10/2017
- Notice Type
- Sources Sought
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of the Navy, Naval Sea Systems Command, NAVSEA HQ, SEA 02, 1333 Isaac Hull Avenue SE, Washington Navy Yard, District of Columbia, 20376, United States
- ZIP Code
- 20376
- Solicitation Number
- N00024-17-R-4437
- Archive Date
- 5/5/2017
- Point of Contact
- Stephanie Jabaley, Phone: 2027812721, Douglas McCreary, Phone: 2027813877
- E-Mail Address
-
stephanie.jabaley@navy.mil, Douglas.McCreary@navy.mil
(stephanie.jabaley@navy.mil, Douglas.McCreary@navy.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- UF 25&28 Sources Sought Notice Naval Sea Systems Command (NAVSEA) is conducting market research to determine industry capability and interest in performing docking and maintenance work in support of two utility floats (UF). Work will be accomplished at the Contractor's facility. The Government is seeking responses from sources that can perform the following work: UF 25: Coordinate with the Contracting Officer, via the Contracting Officer's Representative (COR) to deliver the vessel to the Contractor's facility. Dock, wash, and clean the exterior surfaces of the vessel upon docking. Remove all fendering. Blast and preserve all exterior surfaces of the vessel. Replace zinc anodes. Repair fender brackets. Replace broken studs in manhole bolting rings. Replace manhole cover nuts. Hull and main deck require ultrasonic measurement of plating thickness. Open, clean, inspect and test tanks. Vessel requires inspection for damage and deterioration (Hull, main deck, tanks and voids). Apply new nonskid system to main deck. Undock the vessel. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. Dimensions are: Length 60'0" x Width 15'0"; Hull Type - Steel; Draft 1'6"; Light load 42 L Tons. UF 28: Coordinate with the Contracting Officer, via the Contracting Officer's Representative (COR) to deliver the vessel to the Contractor's facility. Dock, wash, and clean the exterior surfaces of the vessel upon docking. Remove all fendering. Blast and preserve all exterior surfaces of the vessel. Replace zinc anodes. Repair fender bracket. Replace section of D-rubber fender. Replace manhole cover nuts and flat washers. Hull and main deck require ultrasonic measurement of plating thickness. Open, clean, inspect and test tanks. Vessel requires inspection for damage and deterioration (Hull, main deck, tanks and voids. Apply new nonskid system to main deck. Undock the vessel. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. Dimensions are: Length 60'0" x Width 15'0"; Hull Type - Steel; Draft 1.1'; Light load 42 L Tons. The anticipated contract type will be firm-fixed price procured via lowest price technical acceptable selection procedures. The work is anticipated to begin in September 2017. What/Where to Submit: Interested companies should submit, on company letterhead, a notice of interest including the name, telephone number, mailing address, and e-mail address of one point of contact. Please hand or digitally sign your letter of interest and e-mail it to the Government contacts listed below, with "UF 25 & 28 Sources Sought Response" in the subject field. The notice of interest should include a brief description of your company and its capabilities as they relate to the requirements set forth in the description shown above, and answers to the following specific questions. Please limit your response to no more than 5 pages. 1. Is your company a small or large business as defined by the Small Business Administration (SBA) under NAICS code 336611 (a small business must have 1,250 or less employees)? 2. Does your company have a satisfactory performance record for the type of work required? Please provide examples of relevant and recent (within three years) past performance. 3. Does your company have the necessary organization, experience, accounting and operational controls, and technical skills, or the ability to obtain them (including, as appropriate, such elements as production control procedures, property control systems, quality assurance measures, and safety programs applicable to materials to be produced or services to be performed by the prospective contractor and subcontractors)? 4. Given the work described in this announcement, does your company plan to submit a proposal in response to the anticipated solicitation for the UF 25 & 28 package? When to Submit: Responses are requested no later than 12:00PM Eastern, on 20 April 2017. Notice Regarding Sources Sought: This source sought is issued solely for information and planning purposes - it does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. This source sought does not commit the Government to contract for any supply or service whatsoever. Further, the Navy is not seeking proposals at this time, nor accepting unsolicited proposals. Responders are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this source sought; all costs associated with responding to this source sought will be solely at the interested party's expense. Not responding to this source sought does not preclude participation in any future RFP, if any is issued. If a solicitation is released, it will be synopsized on the Federal Business Opportunities (FedBizOpps) website. It is the responsibility of the potential offerors to monitor these sites for additional information pertaining to this requirement. Information provided shall be treated as Business Sensitive or Confidential to the responder, exempt from public release under the Freedom of Information Act. NAVSEA may request further information regarding the capabilities of respondents to meet the requirements set forth in the announcement. This sources sought announcement is released in accordance with FAR 15.201. Information provided in response to this sources sought announcement will not be considered an offer by the responding contractor and cannot be accepted by the Government to form a binding contract.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSEA/NAVSEAHQ/N00024-17-R-4437/listing.html)
- Place of Performance
- Address: The facility must be located in the Puget Sound Washington Region. For this procurement, the Puget Sound Washington Region is defined as the west coast of the continental United States starting from Olympia, WA extending northward to Bellingham, WA., United States
- Record
- SN04466566-W 20170412/170411000218-509c0dcdc75d7f0b8cc372248a8300f1 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |