FBODaily.com | FedBizOpps: PRESOL | 70 | MAXWELL STUDIO EQUIPMENT - SALIENT CHARACTERISTICS

FBO DAILY - FEDBIZOPPS ISSUE OF APRIL 15, 2017 FBO #5622
SOLICITATION NOTICE

70 -- MAXWELL STUDIO EQUIPMENT - SALIENT CHARACTERISTICS

Notice Date: 4/13/2017
Notice Type: Combined Synopsis/Solicitation
NAICS: 334220 — Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing
Contracting Office: Other Defense Agencies, Defense Media Activity, DMA Acquisition and Procurement CA, 23755 Z Street, Riverside, California, 92518-2031, United States
ZIP Code: 92518-2031
Solicitation Number: HQ051679263
Archive Date: 5/25/2017
Point of Contact: Shevonn Moore, Phone: 951-413-2634
E-Mail Address: shevonn.l.moore.civ@mail.mil
(shevonn.l.moore.civ@mail.mil)
Small Business Set-Aside: N/A
Description: COMBINED SYNOPSIS/SOLICITATION: HQ051679263 Title: MAXWELL STUDIO EQUIPMENT Description(s): COMBINED SYNOPSIS/SOLICITATION a. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will a. Solicitation Number HQ051679263 is being issued as a Request for Quotation (RFQ) and not be issued, this is a Brand Name or Equal Procurement and incorporates the following with the word "quoter" substituted for "offeror". b. Provisions and clauses are those in effect through both Federal Acquisition Circular 2005-95, effective 19 Jan 2017 and DFARS Change Notice 20161222. c. This procurement is a brand name or equal requirement; associated with NAICS Code 334220 with a employee size of 1250 and is restricted to Small Business (SB) concerns. d. Description (Note: The Government reserves the right to award only one contract for the following items): PRICE EACH CLIN SEPARATELY CLIN 0001 - 3EA, P/N: AKUC3000GSJ/AJSVCPREM4; MFR: PANASONIC CORP NO AMERICA BTSC DIV; CAMCORDER W/EXTENDED WARRANTY PANASONIC AK-UC3000 4K STUDIO HANDY CAMERA WITH LEMO CCU CONNECTOR(P/N# AK-UC3000GSJ) AND PANASONIC 5-YRS OF STANDARD SERVICE(P/N# AJSVCPREM4Y); SINGLE LARGE UHD 4K MOS SENSOR; B4 LENS MOUNT FOR 2/3-IN LENSES; 1080I/P 59.94/50/23.98P; HI-SPEED UP TO 239.76/200 FPS IN HD; 12-AXIS COLOR CORRECTION, GAMMA CURVES; SERVO CONTROL ND/CC FILTERS; LEMO CAMERA TO CCU CONNECTOR; 1EA LARGE FORMAT MOS SENSOR; NTSC/PAL; 2/3-IN BAYONET LENS MOUNT; USA PART NUMBER ELIGIBLE FOR USA MANUFACTURER WARRANTY, NO GRAY MARKET ITEMS, AUTHORIZED USA DISTRIBUTOR ONLY. UNIT PRICE @ _____________ x 3EA = $__________________ CLIN 0002 - 3EA, P/N: AKHBU500GJ/AJSVCPREM4Y; MFR: PANASONIC CORP NO AMERICA BTSC DIV; LENS MOUNT UNIT W/EXTENDED WARRANTY PANASONIC LARGE LENS BUILD-UP UNIT F/U/W AK-UC3000/AK-HC5000 STUDIO CAMERA(P/N# AK-HBU500GJ) AND PANASONIC FIVE YEARS OF STANDARD SERVICE WARRANTY(P/N# AJ-SVCPREM4Y); PERMITS PRECISE OPTICAL AXIS (HORIZONTAL/VERTICAL) ADJUSTMENT STRUCTURE; REAR CONTROL PANEL EQUIVALENT TO THAT OF A LARGE CAMERA; INTEGRATED CONTROL PANEL; USA PART NUMBER ELIGIBLE FOR USA MANUFACTURER WARRANTY, NO GRAY MARKET ITEMS, AUTHORIZED DISTRIBUTOR ONLY. UNIT PRICE @ _____________ x 3EA = $__________________ CLIN 0003 - 3EA, P/N: AKHVF100GJ/AJSVCPREM4Y; MFR: PANASONIC CORP NO AMERICA BTSC DIV; VIEWFINDER AND EXTENDED WARRANTY PANASONIC 9-IN LCD COLOR VIEWFINDER WITH TILT(P/N# AK-HVF100GJ) AND PANASONIC 5-YRS OF STANDARD SERVICE WARRANTY(P/N# AJ-SVCPREM4Y); FULL HD RESOLUTION 1920X1080 PIXELS; EXTERNAL INPUT HD-SDI (3G SDI; 4 ASSIGNABLE FUNCTION SWITCHES; HIGH-RESOLUTION 22.9CM (9-IN)COLOR LCD PANEL DISPLAYS FULL HD 1920X1080 PIXELS; FOCUS ASSIST FUNCTIONS (FOCUS-IN-RED, FOCUS BAR); CONTRAST, BRIGHTNESS AND PEAKING ARE ADJUSTABLE; PAN, TILT AND LIFT; USA PART NUMBER ELIGIBLE FOR USA MANUFACTURER WARRANTY, NO GRAY MARKET ITEMS, AUTHORIZED USA DISTRIBUTOR ONLY. UNIT PRICE @ _____________ x 3EA = $__________________ CLIN 0004 - 3EA, P/N: AKUCU500PSJ/AJSVCPREM4; MFR: PANASONIC CORP NO AMERICA BTSC DIV; CAMERA CONTROL UNIT AND EXTENDED WARRANTY PANASONIC CAMERA CONTROL UNIT F/U/W AK-HC5000/AK-UC3000 STUDIO CAMERA LEMO(P/N# AK-UCU500PSJ) AND PANASONIC 5-YEARS OF STANDARD SERVICE WARRANTY(P/N# AJ-SVCPREM4Y); CONNECTIONS: X-NETWORK, RJ-45, 7EA SDI OUT, 2EA MIC; 4K/HD; USA PART NUMBER ELIGIBLE FOR USA MANUFACTURER WARRANTY, NO GRAY MARKET ITEMS, AUTHORIZED USA DISTRIBUTOR ONLY. UNIT PRICE @ _____________ x 3EA = $__________________ CLIN 0005 - 3EA, P/N: AKHRP1000GJ/AJSVCPREM4; MFR: PANASONIC CORP NO AMERICA BTSC DIV; REMOTE OPERATION PANEL AND EXTENDED WARRANTY PANASONIC REMOTE OPERATION PANEL F/U/W: AK-UC3000/AK-HC5000 STUDIO CAMERA, 1/4 RACK WIDTH(P/N# AK-HRP1000GJ) AND PANASONIC 5-YRS OF STANDARD SERVICE WARRANTY(P/N# AJ-SVCPREM4Y); PROVIDES REMOTE CONTROL OF PANASONIC CAMERA RECORDERS, CONVERTIBLE CAMERAS, AND HD INTEGRATED CAMERAS; FUNCTIONS FOR STUDIO CAMERA SCENE FILE REGISTRATION AND RETRIEVAL; SD MEMORY CARD SLOT; USA PART NUMBER ELIGIBLE FOR USA MANUFACTURER WARRANTY, NO GRAY MARKET ITEMS, AUTHORIZED USA DISTRIBUTOR ONLY. UNIT PRICE @ _____________ x 3EA = $__________________ CLIN 0006 - 1EA, P/N: AJ-S09TFMCNS; MFR: PANASONIC CORP NO AMERICA BTSC DIV; SERVICE NON-PERSONAL; PANASONIC DAILY CONSULTING RATE; TECHNICAL AND OPERATIONAL TRAINING; 1-DAY; LOC: MAXWELL AFB; POC: MS. LISA WARR, PH. 334-953-7369. UNIT PRICE @ _____________ x 1EA = $__________________ TOTAL PRICE FOR THIS QUOTE $____________________ Delivery and acceptance will be made at location: FOB DESTINATIONS 42 ABW/PAT 55 LeMAY PLAZA SOUTH MAXWELL AFB AL 36112-6335 f. FAR Provision 52.212-1 (Instructions to Offerors - Commercial Items) (Jan 2017) applies to this acquisition. Para (k) requires current registration in SAM at https://www.sam.gov. g. FAR Provision 52.212-2 Evaluation - Commercial Items (OCT 2014) applies with the following insertion at paragraph (a): Technical, Past Performance, and Price; with award being made to the lowest priced responsible, responsive Offeror, with acceptable past performance, meeting the requirements of this combined synopsis/solicitation. Technical evaluation will be based on the Offeror's certification that it is a Manufacturer Authorized Partner and that it has the certification/ specialization level required by the manufacturer to support both the product sale and product pricing, in accordance with the applicable manufacturer certification/ specialization requirements. Past Performance will be verified by checking the Offeror's information on Government past performance websites (i.e. PPIRS) and by checking the Offeror's status on the Excluded Parties List System (EPLS). Offerors are reminded that the Government reserves the right to obtain past performance information from any source available. Offerors will be given the opportunity to respond to any negative past performance information received. It is the responsibility of all interested offerors to review this site frequently for any updates/ amendments that may occur during the solicitation process. The posting of this requirement does not obligate the Government to award a contract nor does it obligate the Government to pay for any proposal preparation costs. The Government reserves the right to cancel this procurement/ solicitation either before or after the solicitation closing date, with no obligation to the offeror by the Government. The Government will issue a contract to the responsible, responsive offeror, with acceptable past performance, submitting the lowest price. All prospective contractors must be registered in the System for Award Management (SAM) in order to be eligible for contract award. For registration, go to www.sam.gov and follow the instructions. The Government reserves the right to make multiple awards if, after considering the additional administrative costs, it is in the Government's best interest to do so. h. Quotations must include a completed copy of FAR Provision 52.212-3 (Offeror Representations and Certifications - Commercial Items) (Jan 2017). Electronic submission is located at https://www.sam.gov. i. This order will include the following referenced clauses which may be accessed electronically at http://farsite.hill.af.mil. FAR 52.212-4 (Contract Terms and Conditions-Commercial Items) (Jan 2017) FAR 52.212-5 (Contract Terms and Conditions Required to Implement Statues Or Executive Orders-Commercial Items) (Jan 2017) FAR 52.219-6 -- Notice of Total Small Business Set-Aside (NOV 2011) FAR 52.219-8 (Utilization of Small Business Concerns and Small Disadvantage Business Concerns) (Nov 2016) FAR 52.222-50 -- Combating Trafficking in Persons. (MAR 2015) FAR 52.225-5 Trade Agreements (Oct 2016) FAR 52.225-6 Trade Agreements Certificate (MAY 2014) FAR 52.225-18 Place of Manufacture (MAR 2015) FAR 52.232-33 (Payment by Electronic Funds-System for Award Management (JUL 2013) DFARS 252.204-7004 Alt A (System for Award Management) (FEB 2014) DFARS 252.204-7007 (Alternate A, Annual Representations and Certification (JAN 2015) DFARS 252.211-7003 Item Unique Identification and Valuation (MAR 2016) DFARS 252.232-7003 (Electronic Submission of Payment Request) (JUN 2012) DFARS 252.232-7006 (Wide Area Work Flow Payment Instructions (MAY 2013) DFARS 252.246-7000 (Material Inspection and Receiving Report) (MAR 2008) Applicable FAR and DFARS clauses required by regulations, in addition to Local DMC clauses, 52.0100-4028 (Contract Contact Information) (DMC) (JUN 2005) and 52.0100-4094 (Marking Instructions for All Items to Include Drop Ship and Direct Shipment) (JUN 2006) will be included. Include the attached provision in all solicitations that will use funds made available by the Continuing Appropriations Act, 2014 (Pub. L. 113-46), including solicitations for the acquisition of commercial items under FAR part 12. 52.0100-4094 MARKING INSTRUCTIONS FOR ALL ITEMS TO INCLUDE DROP SHIP AND DIRECT SHIPMENT (DMA)(FEB 2017) The Contractor shall attach two (2) copies of a detailed packing list with each box or container with unlike items where the full description of the contents is not authorized or cannot be shown. Include one (1) copy of the packing list inside the box or container and attach one (1) copy of the packing list on the outside of the box or container. The outside of the box or container must also include the complete shipping address as provided in the schedule and the Contract/Purchase/Delivery Order number located on Page 1 of this document. The packing list shall contain the following information: (a) Contract number/Purchase Order number or Delivery Order number (b) Package number and set number (if any) of the container. (c) A list of the contents which shows the quantity by item, item description, part number, type and size, unit of issue if other than each. NOTE! The government WILL NOT ACCEPT items shipped without a packing list especially when the content of the package is unidentifiable; rejected items will be returned at the contractor's expense. INCOMPLETE DELIVERIES Incomplete delivery refers to the incomplete shipment of a unit of issue of an individual contract line item (CLIN). Such Incomplete, or fragmented delivery of any part of a CLIN is not authorized and will not be accepted. Each item (CLIN), including all components and sub-items, is to be delivered complete. Where sub-line items are reflected as component parts of an item, all sub-line items must be delivered simultaneously to form the complete item. Note! The government WILL NOT ACCEPT items shipped as incomplete unit of issue of an individual contract line item (CLIN). Rejected items will be returned at the contractor's expense. j. PLEASE FOLLOWING INSTRUCTIONS - QUOTATIONS ARE DUE BY 9:00AM PACIFIC STANDARD TIME ON 10 MAY 2017 IN ORDER TO BE CONSIDERED. Send quotation responses to Shevonn Moore at shevonn.l.moore.civ@mail.mil. On the Subject line of the e-mail insert "QUOTE HQ051679263 - MAXWELL STUDIO EQUIPMENT" to expedite identification of your quote. For assistance or questions about this announcement may be telephonically addressed at (951) 413-2634. PLEASE NOTE: Due to technical issues email and fax may not result in your quotation arriving before the cut-off time so please allow extra time if you're sending your quote via electronic means. Primary Point of Contact: Shevonn Moore Contract Specialist shevonn.l.moore.civ@mail.mil Phone: 951-413-2634 Secondary Point of Contact: Susan M. Madrid, Contracting Officer susan.m.madrid@mail.mil Phone: 951-413-2371 Fax: 951-413-2432 Contracting Office Address: DMA -CONTRACTING 23755 Z Street Riverside, California 92518-2031 Vendor's Name ______________________________________ Vendor's Address: ______________________________________ ______________________________________ ______________________________________ Phone Number: _____________________________________________ e-mail address: _____________________________________________
Web Link: FBO.gov Permalink
(https://www.fbo.gov/notices/382cd1d899d2afa69e9c6765fb24f660)
Place of Performance: Address: 42 ABW/PAT, 55 LeMAY PLAZA SOUTH, MAXWELL AFB, Alabama, 36112-6335, United States; Zip Code: 36112-6335
Record: SN04471821-W 20170415/170413235113-382cd1d899d2afa69e9c6765fb24f660 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

70 -- MAXWELL STUDIO EQUIPMENT - SALIENT CHARACTERISTICS