MODIFICATION
99 -- Dual Linear Rail System, Brand Name or Equivalent Only
- Notice Date
- 4/13/2017
- Notice Type
- Modification/Amendment
- NAICS
- 332510
— Hardware Manufacturing
- Contracting Office
- Department of Commerce, National Institute of Standards and Technology (NIST), Acquisition Management Division, 100 Bureau Drive, Building 301, Room B130, Gaithersburg, Maryland, 20899-1410, United States
- ZIP Code
- 20899-1410
- Solicitation Number
- SB1341-17-RQ-0230-1
- Archive Date
- 4/29/2017
- Point of Contact
- Heather Bauer, Phone: 3019752752
- E-Mail Address
-
heather.bauer@nist.gov
(heather.bauer@nist.gov)
- Small Business Set-Aside
- N/A
- Description
- COMBINED SYNOPSIS/SOLICITATION SB1341-17-RQ-0230-1 Dual Linear Rail System, Brand Name or Equivalent Only This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 - Streamlined Procedures for Evaluation and Solicitation for Commercial Items, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested, and a separate written solicitation document will not be issued. This solicitation is being issued under the authority of FAR Part 13 Simplified Acquisition Procedures. This solicitation is a Request for Quotations (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC)-95 effective 01/19/2017. The associated North American Industrial Classification System (NAICS) code for this procurement is 332510 with a small business size standard of 750 Employees. This acquisition is being procured as a Total Small Business Set Aside. Only quotes submitted by qualified small business concerns will be considered. This is a brand name or equal requirement. All part numbers listed herein are Thompson Linear part numbers. Delivery The materials must be delivered within 60 days of the date of award. The items shall be shipped F.O.B. Destination to: The National Institute of Standards and Technology 100 Bureau Drive Building 301 Gaithersburg, MD 20899 FOB DESTINATION MEANS: The contractor shall pack and mark the shipment in conformance with carrier requirements, deliver the shipment in good order and condition to the point of delivery specified in the purchase order, be responsible for loss of and/or damage to the goods occurring before receipt and acceptance of the shipment by the consignee at the delivery point specified in the purchase order; and pay all charges to the specified point of delivery. EVALUATION CRITERIA AND BASIS FOR AWARD The Government intends to award a purchase order resulting from this solicitation to the responsible Contractor whose quotation, conforming to the solicitation, is the lowest price, technically acceptable quotation. Technically acceptable means that the Contractor provides documentation that confirms that the contractor is capable of meeting the requirements of the Statement of Work, and the requirements of this solicitation. If a Contractor does not indicate how its proposed equipment meets a certain minimum requirement, NIST will determine that it does not. If quoting an "equivalent" brand item to any specified in the Statement of Work, the Contractor must include with their quote documentation that clearly demonstrates that it meets the salient characteristics. Failure to provide such documentation will cause the quote to be unacceptable. Price will be evaluated to determine that total price is consistent with the technical portion of the quotation and is a fair and reasonable overall price to the Government. NIST intends to evaluate quotes and issue a contract based on the initial quotes received. Therefore, the Contractor's initial quote should contain the Contractor's best terms from a price and technical standpoint. NIST reserves the right to request revised quotes from, or negotiate final contract terms with, one or more, but not all, Contractors if later determined by the Contracting Officer to be necessary. REQUIRED SUBMISSIONS All Contractors shall submit the following: 1.For the purpose of evaluation of Technical Acceptability: Documentation that confirms the contractor is capable of providing the brand name or equivalent equipment specified in the statement of work. Contractors shall include a copy of the quoted system's manufacturer's specifications. If quoting an "equivalent" brand item to any specified in the Statement of Work, the Contractor must include with their quote documentation that clearly demonstrates that it meets the salient characteristics. Failure to provide such documentation will cause the quote to be unacceptable. Contractors shall include a copy of the quoted system's manufacturer's specifications. 2.Contractors shall provide a Firm-Fixed-Price to meet all requirements of the Statement of Work. All equipment must be new. Used or remanufactured equipment will not be considered for award. 3.A completed version of all required solicitation provisions (see attached provisions/clauses document - required submissions highlighted in blue). 4.If the contractor objects to any of the terms and conditions contained in this solicitation, the contractor shall state "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:" [Contractor shall list exception(s) and rationale for the exception(s)]. It is the sole responsibility of the contractor to identify in their quote any exceptions to the terms and conditions of the solicitation. If the contractor does not include such a statement, the submission of a quotation in response to this solicitation will be regarded as the Contractor's acceptance of the Government's terms and conditions for inclusion into the resultant purchase order. 5.Contractors shall provide an active DUNS # for the System for Award Management (SAM) registration. 6.If the Contractor's representations and certifications in SAM.gov do not reflect the NAICS code governing this solicitation, Contractors must submit documentation that they are a small business under the NAICS code governing this solicitation. Please note that this procurement IS NOT being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If a contractor submits a quotation based upon an FSS or GWAC contract, the Government will accept the quoted price. However, the terms and conditions stated herein will be included in any resultant Purchase Order, not the terms and conditions of the contractor's FSS or GWAC contract, and the statement required above shall be included in the quotation; DUE DATE FOR QUOTATIONS All quotations must be submitted via e-mail to Heather Bauer, Contract Specialist at Heather.Bauer@nist.gov. Submission must be received not later than 11:00 a.m. Eastern Time on Friday 14 April 2017. A quotation shall be considered received when it is received in the electronic inbox of Heather Bauer not later than the date and time identified herein. All questions regarding this notice must be submitted via e-mail to Heather.Bauer@nist.gov by 11:00 a.m. Eastern Time on Monday 10 April 2017 Questions submitted after this date may not be addressed by the Government prior to the quotation submission deadline. PROVISIONS AND CLAUSES: The clauses and provisions applicable to this solicitation can be found under Applicable Clauses & Provisions. The full text of a FAR provision or clause may be accessed electronically at https://farsite.hill.af.mil or www.acquisition.gov/far. The full text of a CAR provision or clause may be accessed electronically at https://farsite.hill.af.mil or http://www.osec.doc.gov/oam/acquistion_management/policy/. ATTACHMENTS: The following attachments apply to this solicitation: 1. The Statement of Work 2. Applicable Clauses & Provisions **************************************************************** The purpose of this amendment is to: (1) provide answers to all questions received, and (2) extend the quote submission date to 8:00 AM ET on Wednesday, 4/19/2017. Below are all questions received with corresponding answers provided by NIST: Question 1 : Item 11 under the rail, you mention a moment load capacity rating that you seek but only have this labeled with a unit of force (not a torque) you would need to elaborate before we could qualify this. Answer 1 : The amount of torque is the amount of rotational force ( example: twisting a door knob): The Moment of a force is a measure of its tendency to cause a body to rotate about a specific point or axis. This is different from the tendency for a body to move, or translate, in the direction of the force. In order for a moment to develop, the force must act upon the body in such a manner that the body would begin to twist. This occurs every time a force is applied so that it does not pass through the centroid of the body. A moment is due to a force not having an equal and opposite force directly along its line of action. Question 2 : The -SL on the rail part number indicates a special, are there any drawings available with the RFQ that might indicate what the special build is? Answer 2 : NIST is unable to provide any drawings. Any proprietary information related to the brand name item described (e.g., drawings), with the exception of the salient characteristics detailed in Section II of the Statement of Work, would need to come from the equipment manufacturer. ****************************************************************
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOC/NIST/AcAsD/SB1341-17-RQ-0230-1/listing.html)
- Record
- SN04472122-W 20170415/170413235344-0ee361a4e1aead733fe456cd31f13464 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |