AWARD
99 -- Building 422 Move
- Notice Date
- 4/17/2017
- Notice Type
- Award Notice
- NAICS
- 484210
— Used Household and Office Goods Moving
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, USACE District, Albuquerque, Attn: CESPA-CT, 4101 Jefferson Plaza NE, Albuquerque, New Mexico, 87109-3435, United States
- ZIP Code
- 87109-3435
- Solicitation Number
- W912PP-17-T-0053
- Archive Date
- 4/29/2017
- Point of Contact
- Glenda D. Kohlieber, Phone: 5756524135
- E-Mail Address
-
glenda.d.kohlieber@usace.army.mil
(glenda.d.kohlieber@usace.army.mil)
- Small Business Set-Aside
- N/A
- Award Number
- W912PP-17-P-0038
- Award Date
- 4/14/2017
- Awardee
- Moving Solutions Inc, 125 Dale Ave SE, Albuquerque , New Mexico 87105, United States
- Award Amount
- 41,415.11
- Line Number
- 0001
- Description
- The Contractor shall provide services for relocating the identified equipment listed below from Buildings 277, 418 and 243 to Buildings 422 and 760. The Facility user will verify each piece of equipment is accurately identified. The facility user will also assure the miscellaneous equipment is located in a single location and ready for transport. The user will also ensure all cabinets and contents in the cabinets is secured and able to be transported. The optical tables will be disconnected and ready for the mover to relocate. The contractor shall perform an assessment of the equipment and document if anything is obviously damaged prior to relocating. The facility user shall verify the equipment is in working order before and after the equipment is relocated. Equipment to be relocated from Building 277 to Labs in Building 422: 1. 30 tall cabinets with enclosed Lab Equipment (cabinets will be secured for transport) 2. Seven desks and work stations 3. Four optical tables: Sizes (4'x10', 4'x8', 4'x10', and 4'x10') 4. Five work benches 5. Four work tables 6. Two rolling toolboxes 7. One wall mounted cabinetThis action was awarded as an 8(a) Sole Source Set-Aside under the authority of section 8(a) of the Small Business Act. The Contractor shall provide services for relocating the identified equipment listed below from Buildings 277, 418 and 243 to Buildings 422 and 760. The Facility user will verify each piece of equipment is accurately identified. The facility user will also assure the miscellaneous equipment is located in a single location and ready for transport. The user will also ensure all cabinets and contents in the cabinets is secured and able to be transported. The optical tables will be disconnected and ready for the mover to relocate. The contractor shall perform an assessment of the equipment and document if anything is obviously damaged prior to relocating. The facility user shall verify the equipment is in working order before and after the equipment is relocated. Equipment to be relocated from Building 277 to Labs in Building 422: 1. 30 tall cabinets with enclosed Lab Equipment (cabinets will be secured for transport) 2. Seven desks and work stations 3. Four optical tables: Sizes (4'x10', 4'x8', 4'x10', and 4'x10') 4. Five work benches 5. Four work tables 6. Two rolling toolboxes 7. One wall mounted cabinet 8. Miscellaneous assorted equipment of small breadboards and telescopes/equipment racks Equipment to be relocated from Building 277 to Building 760: 1. One 60" telescope (approximately 5,000 lbs.) on rolling stand (must be air ride delivered to prevent damage) 2. One optical table (5'x14') Equipment to be relocated from Building 243 to Building 422: 1. 30 tall cabinets (cabinets will be secured for transport) 2. Three rolling tool boxes 3. Six optical tables: Sizes (5'x14', 5'x6', 4'x8', 4'x6' and two 5'x9') 4. Four breadboards 5. Eight ox boxes of equipment (secured for transport) 6. Two work benches 7. Two work tables 8. Miscellaneous loose equipment which will be located in a single place and ready for transport 8. Miscellaneous assorted equipment of small breadboards and telescopes/equipment racks Equipment to be relocated from Building 277 to Building 760: 1. One 60" telescope (approximately 5,000 lbs.) on rolling stand (must be air ride delivered to prevent damage) 2. One optical table (5'x14') Equipment to be relocated from Building 243 to Building 422: 1. 30 tall cabinets (cabinets will be secured for transport) 2. Three rolling tool boxes 3. Six optical tables: Sizes (5'x14', 5'x6', 4'x8', 4'x6' and two 5'x9') 4. Four breadboards 5. Eight ox boxes of equipment (secured for transport) 6. Two work benches 7. Two work tables 8. Miscellaneous loose equipment which will be located in a single place and ready for transport
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA47/Awards/W912PP-17-P-0038.html)
- Record
- SN04474378-W 20170419/170417234345-664e82359e30592a22108dce6d44c487 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |