MODIFICATION
Z -- Grand Teton NP Spray Foam Insulation IDIQ Requirem
- Notice Date
- 4/27/2017
- Notice Type
- Modification/Amendment
- NAICS
- 238310
— Drywall and Insulation Contractors
- Contracting Office
- NPS, IMR - Northern Rockies MABO PO Box 168 Mammoth Supply Center / 22 Stable St Yellowstone NP WY 82190 US
- ZIP Code
- 00000
- Solicitation Number
- P17PS00482
- Response Due
- 5/30/2017
- Archive Date
- 6/30/2017
- Point of Contact
- Hauch, Martin
- Small Business Set-Aside
- Total Small Business
- Description
- The Department of Interior, National Park Service, Grand Teton National Park, Wyoming, is seeking interested sources for a five year (base plus four option years) Indefinite Delivery/Indefinite Quantity construction multiple award (3 contractors) requirements contract. Awardees will be required to provide all labor, supervision and materials to install spray foam insulation in residential housing units to assist with the completion of rehabilitation projects. Typical floor plans for these residential units vary in size from approximately 400 to 2,500 square feet and consist of a mix of single family homes, duplex and multiplex units. The work will consist, but may vary, of spraying foam insulation on exposed interior exterior walls of a housing unit. Work may also include spraying foam insulation on exposed interior roof surfaces and floor surfaces (crawlspaces). The interior walls of these housing units are 2 ¿ x 4 ¿ built walls, 2 ¿ x 8 ¿ rafters and sheating, and 2 ¿ x 8 ¿ floor joist or concreate wall foundations. Spray foam depth typically will be 50% of stud depth, but this may vary as well. Spray foam shall be medium density closed cell polyurethane (Icynene MD-C-200 or approved equal) insulation. The contractor shall meet the following technical specifications:Thermal Resistance (for 1 inch of material) (R-Value/inch @75 deg F); ASTM C 518; 6.5 hr.sq ft.degree F/BTU; Air Permeance (for 1 inch of material): ASTM E 283: <0.02 L/s.m2 @75 Pa; Water Vapor Transmission (for 1.5 inches of material): ASTM E 96; 0.9 perms; Flame Spread and Smoke Developed Rating: ASTM E 84; Flame Spread:Less than 25; Smoke Development:Less than 450. The Park anticipates that there will be 5 to 8 rehabilitation projects per year that will require spray foam insulation in each of the rehabilitated housing projects. The NAICS code for this project is 238310, with a size standard of $15M. The project magnitude is estimated to be between $250,000 and $500,000. Interested contractors having capabilities necessary to meet or exceed the stated requirements are invited to provide company information in the format of a narrative that demonstrates company experience to Martin Hauch, Contracting Officer: martin_hauch@nps.gov 307-690-5324. Responses shall include the following information: company name, address, point of contact, phone number, socio-economic status, provide DUNS number, and proof of SAM Registration. All relevant input is encouraged. This synopsis is for information and planning purposes only and is not to be construed as a commitment by the Government nor will the Government pay for information solicited; no basis for claim against the Government shall arise as a result from a response to this Sources Sought or Government use of any information provided.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOI/NPS/APC-IS/P17PS00482/listing.html)
- Record
- SN04487515-W 20170429/170427234352-ee721121eeb996dbac29d63a81685adf (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |