SOURCES SOUGHT
66 -- Modular drives and hardware accessories for a UMT Tribolab universal Friction and Wear test machine. - Capability Statement
- Notice Date
- 4/28/2017
- Notice Type
- Sources Sought
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- NASA Shared Services Center (NSSC), Building 1111, Jerry Hlass Road, Stennis Space Center, Mississippi, 39529, United States
- ZIP Code
- 39529
- Solicitation Number
- NNX17623293Q
- Archive Date
- 5/18/2017
- Point of Contact
- Joseph H Reynolds, Phone: 2288136609
- E-Mail Address
-
joseph.h.reynolds@nasa.gov
(joseph.h.reynolds@nasa.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- Capability Statement Minimum Requirements: Friction and Wear Test Accessories for Bruker UMT Tribolab Machine Bruker is the manufacturer of the UMT (Universal Materials Tester) Tribolab which is a multifunction friction and wear test machine designed around a base instrument with modular accessories. This procurement is for an assortment of mechanical drives and test accessories that all must integrate and operate with an existing UMT Tribolab (Serial number TL-16-08-105). The procurement includes on- site installation and training for the accessories. All items are provided by Bruker Nano Surfaces Division of Tucson AZ and their part number and description provided below constitutes a make and model only, no substitutions requirement. Item No. Item Description 1 Block on Ring (BOR) Temp Chamber; 150 C temperature chamber for BOR drive only BOR-150 QTY.1 2 Humidity Controller, Computerized Adjustment, Range: 5 - 85 % RH For Humidity Chambers ONLY (ROT-HUMID/REC- HUMID), Requires 220V Input Source RH99-220 QTY 1 3 High Speed/Torque Rotary Drive; vertical axis, 0.1 to 5000 rpm load dependent speed, includes: 12 mL liquid container for immersed sample testing, centering toolset, standard disc sample for installation ROT-DRIVE QTY 1 4 Rotary Drive Variable Rolling-to-Sliding Module For ROT-Drive Only - Includes Self-Leveling DFH Disk Holder (SLH-DFH) - Includes ball & pin specimen for starter kit S-SL-RO-FIX QTY 1 5 Rotary Drive Temp Chamber, 400°C Removable Temperature Chamber for Rotary Drive For ROT-Drive ONLY - Range: Ambient up to 400°C - Can be used with ROT-DRIVE liquid container ROT-400 QTY 1 6 Rotary Drive Humidity Test Chamber, removable humidity test chamber for for rotary drive (ROT-DRIVE) only, requires Humidity Controller RH99-220 priced separately) ROT-HUMID QTY 1 7 Rotary Drive Universal Adjustable Disc Holder For ROT-Drive Only - For 1 to 2.5" (20 to 65mm) Disc Diameters DH-20-65 QTY. 1 8 Single Axis torque sensor, Range: 0.057 to 5.7 Nm; resolution: 280 μNm TH-25 QTY. 1 9 Single Axis Torque Sensor - Range: 0.014 to 1.4 Nm; resolution: 70 µNm TM-6 QTY, 1 10 Single Axis Torque Sensor - Range: 0.0035 to 0.35 Nm; resolution: 17.5 µNm TM1.5 QTY.1 11 Four Ball Test Kit, for ROT-DRIVE only, for half inch diameter ball specimen, includes lower three ball holder, upper ball holder and supporting accessories including four test balls TF-4B-127 QTY. 1 12 Fast Reciprocating Linear Drive (Oscillating Horizontal Motion) - Stroke adjustable from 0.1mm to 25mm - Speed: 0.1 to 60Hz (stroke length dependent: MAX. 20Hz @ 25mm, 40Hz @ 12.5mm, 60hz @ 2mm) - Includes liquid container for tribology tests in fluid & integrated sample holder for dry testing, 25mL total volume - Includes standard plate sample for installation - Includes centering tools REC-DRIVE QTY. 1 13 Reciprocating Drive Humidity Test Chamber, removable humidity test chamber for reciprocating drive (REC-DRIVE) only, requires Humidity Controller RH99-220 priced separately) REC-HUMID QTY. 1 14 Self-Leveling Cross Cylinder Holder, DFH 6.35mm Includes short and long cylinder holders for high-load or environmental chamber testing - 0.5" Shaft for sensor models DFH - Recommended pin length: 10 mm UCH-63- DFH QTY. 1 15 Linear Drive (Horizontal Motion) stroke: 120 mm, Speed: 0.001 to 10 mm/sec, Max Load: 2000 N, Max Lateral Force: 450 N L-DRIVE QTY. 1 16 Friction/Load Sensor, 0.10 - 10N - Gold series, 2-axis medium-range Friction/Load sensor - Range: 0.10 to 10 N; resolution: 0.5 mN - 1kg suspension and DFM rigid adapter included - Pelican case included DFM-1G QTY.1 17 Friction/Load Sensor, 2 - 200N - Gold series, 2-axis medium-range Friction/Load sensor - Range: 2 to 200 N; resolution: 10 mN - 20kg suspension and DFM rigid adapter included - Pelican case included DFH-20G QTY. 1 18 Test balls: 100 Pack of 440C 1/4" Dia Balls BS-63-1-100 QTY. 1 19 Indenter: Standard Vickers type IND-VICK QTY. 1 20 Installation and Training, 3 drives ITCS1-SRV QTY. 1
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/fd2df644b6a411f51f7246e55fdafdc4)
- Record
- SN04489410-W 20170430/170428234135-fd2df644b6a411f51f7246e55fdafdc4 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |