SOURCES SOUGHT
61 -- Cheatham Power Plant Transformers
- Notice Date
- 5/4/2017
- Notice Type
- Sources Sought
- NAICS
- 335311
— Power, Distribution, and Specialty Transformer Manufacturing
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, USACE District, Nashville, Attn: CELRN-CT, PO Box 1070, Nashville, Tennessee, 37202-1070, United States
- ZIP Code
- 37202-1070
- Solicitation Number
- W912P5-17-S-0005
- Archive Date
- 5/27/2017
- Point of Contact
- Debra A. Barlow, Phone: 6157367933, Kristal R Jones, Phone: 615-736-7916
- E-Mail Address
-
debra.a.barlow@usace.army.mil, Kristal.R.Jones@usace.army.mil
(debra.a.barlow@usace.army.mil, Kristal.R.Jones@usace.army.mil)
- Small Business Set-Aside
- N/A
- Description
- THIS IS NOT A SOLICITATION, INVITATION FOR BID, REQUEST FOR QUOTE (RFQ) OR A REQUEST FOR PROPOSAL (RFP). THIS SOURCES SOUGHT IS FOR ACQUISITION PLANNING PURPOSES ONLY AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT TO ISSUE A SOLICITATION OR ULTIMATELY AWARD A CONTRACT. ANY COST INCURRED AS A RESULT OF THE ANNOUNCEMENT SHALL BE BORNE BY THE INTERESTED PARTY (PROSPECTIVE OFFEROR) AND WILL NOT BE CHARGED TO THE GOVERNMENT FOR REIMBURSEMENT. RESPONDENTS WILL NOT BE NOTIFIED OF THE RESULTS OF ANY GOVERNMENT ASSESSMENTS. PURPOSE: The U.S. Army Corps of Engineers Nashville District is conducting this Sources Sought in support of Market Research to notify and seek potential qualified members of industry to gain knowledge of capabilities, interest, and qualification; to include the Small Business Community for providing transformers that are equal to the Ritz Instrument Transformers, Inc. Product Type VEF 72-13, 350/600:1:1 Voltage (Potential) Transformer. Responses to this Sources Sought Synopsis will be used by the government in making appropriate acquisition decisions. The type of solicitation to be issued will depend upon the responses to this sources sought synopsis. The Government must ensure there is adequate competition among the potential pool of responsive contractors. The type of set-aside decision to be issued will depend upon the responses to this sources sought. NO SOLICITATION EXISTS AT THIS TIME. SCOPE: This Market Research/Sources Sought Notice is for information on availability and capability of potential Contractors to provide transformers that have the following salient characteristics: Single-Pole Cast Resin Insulation Wound-Type Voltage (Potential) Transformers Maximum System Voltage: 72.5 kV Nominal System Voltage: 69 kV Nominal Frequency: 60 HZ Basic Impulse Level (BIL): 350 kV Power Frequency Withstand Voltage (PFWV): 140 kV Rated Voltage: 69000GY/40250 V Ratio: 350/600:1:1 Accuracy/Burden Winding #1: 0.3WXYZ Accuracy/Burden Winding #2: 0.3WXYZ Overvoltage Factor: 1.73 I 1min @ 1.1cont. Thermal Burden: 2000 VA Creepage Distance: 102.30" Color: Grey Compliance Standard: ANSI C57.13-1993 Primary Terminal: NEMA 4-hole tin-plated copper Base Height to Terminal Lug: 56.38 in. Width: 19.18 in. Weight: 507 lbs. GENERAL INFORMATION: The proposed project will be a Firm Fixed Price contract. North American Industrial Classification System (NAICS) Code applicable to this acquisition is 335311, Power, Distribution and Specialty Transformer Manufacturing. Small Business Size Standard for this acquisition is 750 employees. Interested parties must be registered in the System for Award Management (SAM), at www.sam.gov. There is NO fee to register for this site. CAPABILITY STATEMENT TO SHOW INTEREST AND INTENT: Respondents interested in performing the proposed project as a prime contractor should submit a capability statement for consideration that include the following: (In A through G). A. Offerors' name, address, points of contact with telephone numbers and e-mail addresses. B. DUNS number and CAGE code. C. Business size/classification to include any designations (Small Business, HUBZone, 8(a), Women-owned, Service-Disabled Veteran-Owned, etc.). D. A Statement of Capability (SOC) stating your skills, experience, and knowledge required to provide the specified type of transformer as described above. This SOC should be a brief description of your company's capabilities. Include a statement detailing any special qualifications and certifications, applicable to the scope of this project, held by your firm and/or in-house personnel. The potential offeror should provide brief references of relevant work they have performed and the magnitude. E. Indicate whether your company will perform the work directly, or intends to subcontract the work. If subcontracting, identify the percentage of work to be subcontracted. Identify the percentage of work your form may be capable of directly performing. F. Any other information that would assist in determining your company's capability in performing the described construction work. SUBMISSION OF CAPABILITY STATEMENT: Submissions of capability statements are due by 2:00 p.m. Central Daylight Savings Time (CDT) on May 12, 2017. Responses to this sources sought may be faxed to the attention of Debra Barlow at (615) 736-7124; mailed to U.S. Army Corps of Engineers, Nashville District, CELRN-RC-N, Room A405, 110 Ninth Ave. South, Nashville, TN 37203 or send via email to debra.a.barlow@usace.army.mil. DO NOT SUBMIT PROPRIETARY AND/OR BUSINESS CONFIDENTIAL DATA. EMAIL IS THE PREFERRED METHOD WHEN RECEIVING RESPONSES TO THIS SYNOPSIS. NOTE: IF YOU DO NOT INTEND TO SUBMIT A BID ON THIS PROJECT WHEN IT IS FORMALLY ADVERTISED, PLEASE DO NOT SUBMIT A RESPONSE TO THIS SOURCES SOUGHT SYNOPSIS.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA62/W912P5-17-S-0005/listing.html)
- Record
- SN04496147-W 20170506/170504235306-9155592c10377f3d5dca1a502fb7afba (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |