SOURCES SOUGHT
34 -- Laser Tracking System
- Notice Date
- 5/9/2017
- Notice Type
- Sources Sought
- NAICS
- 333515
— Cutting Tool and Machine Tool Accessory Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, Tinker AFB - AFSC/PZIO, 7858 5th Street Ste 1, Tinker AFB, Oklahoma, 73145-9106, United States
- ZIP Code
- 73145-9106
- Solicitation Number
- FA8125-17-R-0017
- Archive Date
- 5/16/2017
- Point of Contact
- James D. Farirs, Phone: 4055826200
- E-Mail Address
-
james.farris.1@us.af.mil
(james.farris.1@us.af.mil)
- Small Business Set-Aside
- N/A
- Description
- THIS IS NOT A SOLICITATION, NO QUOTES WILL BE ACCEPTED. The government is conducting a market survey to identify potential sources to provide laser tracking systems with probing and scanning capabilities that are portable, easy to setup and calibrated to NIST standards. The systems shall "track" or measure reflector locations at rate of at least 1,000 points per second with a distance accuracy of +/-.05µm/m. Five of the six trackers shall accurately measure points up to 60 meters from the tracker. The medium range tracker should be accurate up to 20 meters from the laser. The trackers with scan capabilities shall measure surface points up to 200,000 points per second with an uncertainty of +/- 60 µm or better. The wireless probe shall enable inspection of hidden points with an uncertainty of +/- 35 µm or better. All laser trackers shall have an environmental working condition rating according to IP54 ( IEC 60529). All laser trackers shall have the ability to run on battery power, with batteries that can be hot swapped, for continuous 24 hour operation. These laser trackers will also need to include a measurement device with two sensor measurement capabilities. One sensor shall be a touch probe; the other shall be an optical sensor capable of accuracies more accurate than +/-.001". In addition the laser must also have to provide a portable measurement arm with point repeatability accuracies more accurate than +/-.0007 inches and volumetric accuracies more accurate than +/-.001 inches. The laser trackers must be in compliance with ISO STD 17025 or ANSI/ NCSL Z540-1-1994. The laser tracker must able to operate as stated above in shop/field environments All responses to this sources sought shall include Describe briefly the capabilities of your facility and the nature of the goods and/or services you can provide Demonstrate your ability and experience for the same or similar requirement which has been provided in the commercial or government environment Provide brochures and/or pamphlet of your companies capabilities. Provide contact information THIS IS NOT A SOLICITATION, NO QUOTES WILL BE ACCEPTED.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OCALCBC/FA8125-17-R-0017/listing.html)
- Record
- SN04500924-W 20170511/170509234727-567cdadf16037f400f82515189db8b71 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |