SOLICITATION NOTICE
70 -- HP BL460 Gen 9 CTO Blade, Kits, Memory Adaptors, RAM and Support for the Blade Servers
- Notice Date
- 5/10/2017
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- 2 Massachusetts NE, Washington, DC 20212
- ZIP Code
- 20212
- Solicitation Number
- 1625-OTS-17-NAT-0064
- Response Due
- 5/16/2017
- Archive Date
- 11/12/2017
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- N/A
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 1625-OTS-17-NAT-0064 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-95. The associated North American Industrial Classification System (NAICS) code for this procurement is 541519 with a small business size standard of $27.50M. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2017-05-16 16:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Washington, DC 20212 The DOL BLS Washington DC requires the following items, Brand Name Only (Exact Match), to the following: LI 001: Config Build #1-BL460 Server HP BL460c Gen9 10Gb/20Gb FLB CTO Blade Part# 727021-B21, 8, EA; LI 002: HP BL460c Gen9 E5-2690v3 FIO Kit Part# 726987-L21, 8, EA; LI 003: HP BL460c Gen9 E5-2690v3 Kit Part# 726987-B21, 8, EA; LI 004: Factory integrated Part# 726996-B21#0D1, 8, EA; LI 005: HP 16GB 2Rx4 PC4-2133P-R Kit Part# 726719-B21, 64, EA; LI 006: Factory integrated Part# 726719-B21#0D1, 64, EA; LI 007: HP 600GB 12G SAS 15K 2.5IN SC ENT HDD Part# 759212-B21, 16, EA; LI 008: Factory integrated Part# 759212-B21#0D1, 16, EA; LI 009: HP FlexFabric 20Gb 2P 650FLB FIO Adptr Part# 700764-B21, 8, EA; LI 010: HP Smart Array P246br/1G FIO Controller Part# 749975-B21, 8, EA; LI 011: HP 3Y 4 hr 24x7 Proactive Care SVC Part# H1K92A3, 8, EA; LI 012: HP BL460c Gen9 Server Blade HW Supp Part# H1K92A3#TT8, 8, EA; LI 013: Config Build #2-BL460 Server HP BL460c Gen9 10Gb/20Gb FLB CTO Blade Part# 727021-B21, 3, EA; LI 014: HP BL460c Gen9 E5-2623v3 FIO Kit Part# 726996-L21, 3, EA; LI 015: HP BL460c Gen9 E5-2623v3 Kit Part# 726996-B21, 3, EA; LI 016: Factory integrated Part# 726996-B21#0D1, 3, EA; LI 017: HP 16GB 2Rx4 PC4-2133P-R Kit Part# 726719-B21, 24, EA; LI 018: Factory integrated Part# 726719-B21#0D1, 24, EA; LI 019: HP 600GB 12G SAS 15K 2.5IN SC ENT HDD Part# 759212-B21, 6, EA; LI 020: Factory integrated Part# 759212-B21#0D1, 6, EA; LI 021: HP FlexFabric 20Gb 2P 650FLB FIO Adptr Part# 700764-B21, 3, EA; LI 022: HP Smart Array P246br/1G FIO Controller Part# #749975-B21, 1, EA; LI 023: HP 3Y 4 hr 24x7 Proactive Care SVC Part# H1K92A3, 3, EA; LI 024: HP BL460c Gen9 Server Blade HW Supp Part# H1K92A3#TT8, 3, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, DOL BLS Washington DC intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. DOL BLS Washington DC is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. (a) In accordance with Section 743 of Division E, Title VII, of the Consolidated and Further Continuing Resolution Appropriations Act, 2015 (Pub. L. 113-235), Government agencies are not permitted to use funds appropriated (or otherwise made available) under that or any other Act for contracts with an entity that requires employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or subcontractors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (b) The prohibition in paragraph (a) of this provision does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (c) Representation. By submission of its offer, the Offeror represents that it does not require employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or subcontractors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. Invoicing Procedures - Electronic Submission of Payment Requests (a)Definitions. As used in this clause- (1)Contract financing payment has the meaning given in FAR 32.001. (2)Invoice payment has the meaning given in FAR 32.001. (3)Payment request means any request for contract financing payment or invoice payment submitted by the contractor under this contract. (b)Electronic Payment Requests. Except as provided in paragraph (e) of this clause, the contractor shall submit payment requests in electronic form. Purchases paid with a Government-wide commercial purchase card are considered to be an electronic transaction for purposes of this clause, and therefore no additional electronic invoice submission is required. An original invoice shall be prepared and submitted to the Department of Labor (DOL) by email to: DOL-BLS@quickpay.dol.gov (c)Data Transmission. A contractor must ensure that the data transmission method and format comply with the following provisions: (1)The contractor shall: a.Address the invoice to the appropriate e-mail address specified in the contract. b.Submit the invoice via attachment in PDF or TIFF format. c.Submit only one invoice per electronic submittal. d.Enter specific information in the subject line of the e-mail in the following format:, Bureau of Labor Statistics,, Invoice Number, Example: ABC Co, OASAM, DOL00-00-X0000/X0000, Invoice Number AB-1298433, $15,000.00. e.Submit a copy of the email with the attached invoice to the contracting officer s representative (COR) at the COR email address specified in the contract. f.Before sending another e-mail with the same invoice attachment, confirm whether DOL has already responded and/or whether you have received a success or failure response to your submission. (2)The contractor MUST NOT: a.Submit an invoice that exceeds the size limit of 16 megabytes (approximately 400-500 pages). However, if the invoice exceed this limit, a summary invoice attachment of less than 16 megabytes should be e-mailed to the payment e-mail address above; while the detailed invoice, including any supplemental information, shall be sent to the COR or other representative at the address. b.Submit an invoice that is heavy in shading or color. 1.An e-mailed PDF image cannot have any text that has a background with any color other than white. If the image has a shaded background, it will be converted to black, and the text will be illegible. 2.An emailed TIFF image must be black and white. c.Submit more than one attachment, as subsequent attachments will not be recognized. d.Submit more than one invoice in a single attachment. e.Attempt to use the Recall or Resend email message feature. (d)General Information. Payment due dates will be calculated only from the date that invoices are received in the electronic invoicing e-mail box and determined to be proper invoices. Inquiries regarding invoices should be e-mailed to BLSInvoiceInquiry@dol.gov. The relevant invoice must be attached to the inquiry e-mail and the subject line of the e-mail must state INQUIRY, followed by the information described in paragraph (1) d. above. Example: INQUIRY:, Bureau of Labor Statistics,, Invoice Number, Do NOT use the electronic invoicing e-mail address for inquiries about the invoice. (e)Invoice requirements. Invoices shall comply with FAR 32.905. (f)Exceptions. Paper invoices should only be faxed or mailed through U.S. mail when electronic mail cannot be accomplished. When invoices must be faxed due to e-mail size limitations, fax them to: 202-691-7796 When paper invoices must be mailed due to e-mail size limitations, mail them to the following address: U.S. Department of Labor Bureau of Labor Statistics 2 Massachusetts Avenue, N.E. Room 4135 Washington, D.C. 20212 To be considered for award, all Sellers must be manufacturer/ Federally authorized distributors of the equipment/services they are offering with a demonstrated capability of delivering the entire order within the time frames specified by the Buyer on the award. Sellers may be required to provide documentation as proof of authorization to be considered for award. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Bid MUST be good for 30 calendar days after close of Buy. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. The Federal Electronic and Information Technology Accessibility Standards (36 CFR 1194) are incorporated into and made a part of this contract. A printed copy of the standards will be supplied upon request. The contractor must comply with the above referenced standards in performing this contract. (a) The contractor represents by signing this offer that the supplies and services offered in response to this solicitation, except for those identified in paragraph (b), comply fully with the Electronic and Information Technology Accessibility Standards at 36 CFR 1194. Each supply or service that will not be totally compliant at time of delivery or is only partially compliant is listed in paragraph (b). (b) All noncompliant and partially compliant supplies or services are listed below. In addition, for each supply or service that is not in full compliance, or is partially compliant, a detailed discussion of which standards are satisfied and which standards are not satisfied by the offered supply or service is included. Also, any qualifications or conditions that might affect compliance with Section 508 of the proposed supplies or services are described. The list will be kept current during the period of performance. (a) Any system or product that includes: hardware, software, firmware, and/or networked components including but not limited to voice, video, or data that is developed, procured, or acquired in support and/or performance of this requirement shall be capable of transmitting, receiving, processing, or forwarding digital information across system boundaries that are formatted in accordance with commercial standards of Internet Protocol (IP) version 6 (IPv6) as set forth in the USGv6 Profile (NIST Special Publication 500-267) and corresponding declarations of conformance defined in the USGv6 Test Program. (b) This IPv6 capable system or product shall maintain interoperability with IPv4 systems and provide the same level of performance and reliability capabilities of IPv4 systems. (c) This IPv6 capable system or product shall have available IPv4 and IPv6 technical support for development, implementation, and troubleshooting of the system. (d) This IPv6 capable system or product can be upgraded, or the vendor will provide an appropriate migration path for industry-required changes to IPv6 as the technology evolves, at no additional cost to the Government. (e) This IPv6 capable system or product must be able to operate on networks supporting IPv4 & IPv6, as well as networks that support both. (f) Any system or product whose IPv6 non-compliance is discovered and made known to the vendor/contractor within 12 months of the start of performance shall be upgraded, modified, replaced, or brought in to compliance at no additional cost to the Federal Government. (a) Except for changes identified in writing and signed by the Contracting Officer, the Contractor is required to notify, within five working days of receipt or knowledge, any request for changes to this contract (including actions, inactions, and written or oral communications) that the Contractor regards as exceeding the scope of the contract. On the basis of the most accurate information available to the Contractor, the notice shall state: (1) The date, nature, and circumstances of the conduct regarded as a change in scope; (2) The name, function, and activity of each Government individual and Contractor official or employee involved in, or knowledgeable about, such conduct; (3) The identification of any documents and substance of any oral communication involved in such conduct; (b) Following submission of this notice, the Contractor shall continue performance in accordance with the contract terms and conditions, unless notified otherwise by the Contracting Officer. (c) The Contracting Officer shall promptly, within 5 business days after receipt of notice from the Contractor, respond to the notice in writing. In responding, the Contracting Officer shall either: (1) Confirm that the Contractor's notice identifies a change in the scope of the contract and directs the Contractor to stop work, completely or in part, in accordance with the Stop Work provisions of the contract; (2) Deny that the Contractor's notice identifies a change in scope and instruct the Contractor to continue performance under the contract; or (3) In the event the Contractor's notice does not provide sufficient information to make a decision, advise the Contractor what additional information is required, and establish the date by which it should be furnished and the date thereafter by which the Government will respond. CONTRACTING OFFICER'S REPRESENTATIVE (COR) CLAUSE (a) A COR of US Department of Labor, Bureau of Labor Statistics, is hereby designated to act as contracting officer's technical representative (COR) under this contract. (b) The COR is responsible, as applicable, for receiving all deliverables; inspecting and accepting the supplies or services provided hereunder in accordance with the terms and conditions of this contract; providing direction to the contractor which clarifies the contract effort, fills in details or otherwise serves to accomplish the contractual scope of work; evaluating performance; and certifying all invoices/vouchers for acceptance of the supplies or services furnished for payment. (c) The COR does not have the authority to alter the contractor's obligations under the contract, and/or modify any of the expressed terms, conditions, specifications, or cost of the agreement. If, as a result of technical discussions, it is desirable to alter/change contractual obligations or the scope of work, the contracting officer must issue such changes. 52.203-9 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS (MARCH 2015) (a) The Contractor shall not require employees or subcontractors seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or subcontractors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (b) The contractor shall notify employees that the prohibitions and restrictions of any internal confidentiality agreements covered by this clause are no longer in effect. (c) The prohibition in paragraph (a) of this clause does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (d) (1) In accordance with section 743 of Division E, Title VII, of the Consolidated and Further Continuing Resolution Appropriations Act, 2015 (Pub. L. 113-235), use of funds appropriated (or otherwise made available) under that or any other Act may be prohibited, if the Government determines that the Contractor is not in compliance with the provisions of this clause. (3) The Government may seek any available remedies in the event the contractor fails to comply with the provisions of this clause.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOL/OASAM/WashingtonDC/1625-OTS-17-NAT-0064/listing.html)
- Place of Performance
- Address: Washington, DC 20212
- Zip Code: 20212
- Zip Code: 20212
- Record
- SN04503586-W 20170512/170510235521-2ca5358664afe08133706d4e0844237e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |