SOLICITATION NOTICE
78 -- Gym Equipment
- Notice Date
- 5/12/2017
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- 1304 North Lighting Road, Hunter Army Airfield, GA 31409
- ZIP Code
- 31409
- Solicitation Number
- w91YH4th007
- Response Due
- 5/16/2017
- Archive Date
- 11/12/2017
- Point of Contact
- Name: Client Services, Title: Sourcing Agent, Phone: 1.877.9FEDBID, Fax: 703.442.7822
- E-Mail Address
-
clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is w91YH4th007 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-95. The associated North American Industrial Classification System (NAICS) code for this procurement is 339920 with a small business size standard of 500.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2017-05-16 16:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be in the Statement of Work. The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: Competition Plates (Pair): - Require 24 sets (A set being two plates each) - Plate must be competition type - Must be blue in color - Must be 2.15 wide - Must be tested on a Shore A Durometer Scale for minimal bounce. Must have averaged 94 - Must be 450mm (17.72 ) in diameter - Collar opening must be 50.4mm +/- 0.1 - Must be a textured matte finish - Must have protective rubber flanges - Must have a weight tolerance of +/-15 grams - Rogue Competition plates or like item, 24, set; LI 002: 25LB Competition Plates (Pair): - Require 12 sets (A set being two plates each) - Plate must be competition type - Must be green in color - Must be 1.25 wide - Must be tested on a Shore A Durometer Scale for minimal bounce. Must have averaged 94 - Must be 450mm (17.72 ) in diameter - Collar opening must be 50.4mm +/- 0.1 - Must be a textured matte finish - Must have protective rubber flanges - Must have a weight tolerance of +/-15 grams - Rogue Competition plates or like item, 12, EA; LI 003: Sandbags (Small) - Require 4 each - Must be Army green in color with black stitching - Must be 20 inches long - Must be 7 inches in diameters - Must have a max weight of 40LBS - Must have 1000D Mil spec - Must be funnel filler style sand bag - Must have 7 exterior High-Strength Handles - Must have double-stitched, reinforced seams - Must have heavy-duty zipper and reinforced Velcro flap closure - Must have Velcro sewn into interior walls to align with funnel filler style bag - Must have a 3 year warranty - Rogue sandbag or like style, 4, EA; LI 004: Sandbags (Medium) - Require 4 each - Must be Army green in color with black stitching - Must be 24 inches long - Must be 9 inches in diameters - Must have a max weight of 80 LBS - Must have 1000D Mil spec - Must be funnel filler style sand bag - Must have 7 exterior High-Strength Handles - Must have double-stitched, reinforced seams - Must have heavy-duty zipper and reinforced Velcro flap closure - Must have Velcro sewn into interior walls to align with funnel filler style bag - Must have a 3 year warranty - Rogue sandbag or like style, 4, EA; LI 005: Sandbags (Large) - Require 4 each - Must be Army green in color with black stitching - Must be 35 inches long - Must be 11 inches in diameters - Must have a max weight of 160 LBS - Must have 1000D Mil spec - Must be funnel filler style sand bag - Must have 7 exterior High-Strength Handles - Must have double-stitched, reinforced seams - Must have heavy-duty zipper and reinforced Velcro flap closure - Must have Velcro sewn into interior walls to align with funnel filler style bag - Must have a 3 year warranty - Rogue sandbag or like style, 4, EA; LI 006: Sandbags (Extra Large) - Require 2 each - Must be Army green in color with black stitching - Must be 42 inches long - Must be 14 inches in diameters - Must have a max weight of 220 LBS - Must have 1000D Mil spec - Must be funnel filler style sand bag - Must have 7 exterior High-Strength Handles - Must have double-stitched, reinforced seams - Must have heavy-duty zipper and reinforced Velcro flap closure - Must have Velcro sewn into interior walls to align with funnel filler style bag - Must have a 3 year warranty - Rogue sandbag or like style, 2, EA; LI 007: Filler Bags - 45 Filler bags required - Must be modular filler bag of the same corresponding size - Must have a 3 year warranty, 45, EA; LI 008: Concept 2 SKI ERG - 2 Concept 2 Wall Mounted Ski Erg with PM5 required - 2 Concept 2 Ski Erg Floor Stand v2 required, 2, EA; LI 009: Fan Exercise Bike - 1 each required - Must be 50.9 L x 23.3 W x 48.4 H (cm 129.4L x 59.3W x123H) when assembled - Must weigh 98.1LBs when assembled - Must have large diameter foot pegs - Must come with Polar Heart Rate compatibility - Must come with over-sized urethane feet - Must have sealed cartridge bottom brackets - Must have forged chro-moly cranks - Must have a 24 inch resistance fan - Must come with 5 year warranty - Must come with 4-way adjustable seat post - Must come with sealed cartridge pivots - Must be black in color - Assault AirBike or like item, 1, EA; LI 010: Dip Belt - Require 6 each - Must be black in color - Must be a one size fits all - must be 4 inches wide - Must be rated at 29,400 LBs - Must be 30 inches long - Must have a Ό inch thick steel chain - Must have 2x steel D-shaped carabiner - Must be made of heavy duty nylon - Rogue Dip Belt or like item, 6, EA; LI 011: Mobility Ball - Require 15 each - Must be blue and grey in color - Must weigh 1.5 pounds - Must be 120mm in diameter - Must be latex free - MOBILITYWOD Supernova 2.0 or like item, 15, EA; LI 012: MOBILITYWOD Gemini - 15 required, 15, EA; LI 013: Lacrosse Balls - 30 required - Must be red in color - Must be 5ozs each - Must be 2.54 inches in diameter - Must be made of rubber, 30, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf "AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures." "52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report" This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: Price. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. No multiple awards will be made. Quotes received through FedBid will be evaluated and awarded on an all-or-nothing basis. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site. Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/94a09a3026f71f2f504b9bc0775d6a1d)
- Place of Performance
- Address: See Statement of Work.
- Zip Code: -
- Zip Code: -
- Record
- SN04507267-W 20170514/170512235349-94a09a3026f71f2f504b9bc0775d6a1d (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |