Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF MAY 18, 2017 FBO #5655
SOLICITATION NOTICE

77 -- Digital Sound System

Notice Date
5/16/2017
 
Notice Type
Combined Synopsis/Solicitation
 
Contracting Office
2823 W Main St, Rapid City, SD 57701
 
ZIP Code
57701
 
Solicitation Number
W90YFB-7075-0101_01
 
Response Due
5/26/2017
 
Archive Date
11/22/2017
 
Point of Contact
Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
 
E-Mail Address
Clientservices@fedbid.com;
 
Small Business Set-Aside
Total Small Business
 
Description
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is W90YFB-7075-0101_01 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-95. The associated North American Industrial Classification System (NAICS) code for this procurement is 512240 with a small business size standard of $7.50M. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2017-05-26 12:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Mitchell, SD 57301 The National Guard - South Dakota requires the following items, Meet or Exceed, to the following: LI 001: Midas M32C - 40-input channel, 26-bus, 1U rack mountable digital mixing core, 25 time-aligned and phase-coherent mix buses - AES50 networking (up to 96 inputs and 96 outputs) - High-performance aluminium and high-impact steel structure - 40 bit floating point digital signal processing - 8DCA and 6 mute groups - 8 digital signal processing effects engines - 32 x 32 channel USB 2.0 audio interface - Built-in expansion port for audio interface cards or digital networking bridges - MIDI In/Out for remote scene recall or controlling other MIDI equipment - Wireless remote control with MIDAS Apps for iPhone and iPad - Auto-ranging universal switch-mode power supply., 1, EA; LI 002: Midas DL32 - 48 bidirectional audio channels over Cat 5e cable (48 kHz) - 24 bidirection audio channels over Cat 5e cable (96 kHz) - Single cable duplex interconnection for audio and sample clocks - Ethernet physical layer audio data transmission - High channel count and ultra-low deterministic latency - Accure phase-aligned clock distribution - Comprehensive error detection and management - Provision for redundant networking - Ethernet TCP/IP protocol-compatible auxiliary data channel - Two AES-3 ports (AES/EBU) - MIDI In/Out - Neutrik etherCON AES50 and ULTRANET network ports -, 1, EA; LI 003: Apple iPad Pro - 12.9", Silver, 128GB Wi-Fi model - 2732x2048 resolution at 264 ppi - Fingerprint-resistant oleophobic coating - Fully laminated display - Antireflective coating - 8-magapixel iSight camera - 1080p HD video recording at 30 fps - Slo-mo video support for 720p at 120 fps - Video geotagging - Face detection - 3x video zoom - FaceTime HD Camera - 1.2 megapixel photos - 720p HD video recording - f/2.2 aperture - Auto HDR for photos and videos - Backside illumination - Exposure control - Burst mode - Timer mode - build in 38.5 watt hour rechargeable lithium-polymer battery. - iOS 10, 1, EA; LI 004: iPad Pro Defender Case - 3 layer protective case - built-in screen protector - Port covers - For 12.9" iPad Pro, 1, EA; LI 005: Shure ULX-D4Q Wireless Receiver = L50 Band - Four receivers in 1RU metal chassis with internal power supply - Individual gain controls, LED meters, and XLR outpus for each channel - Up to 64 MHZ tuning range - Digital predictive switching diversity - RF Cascade ports - Optimized scanning - Bodypack frequency - AES 256-bit encryption - Audio summing routes two or more audio channels to combinations of receiver outputs - Dant digital networked audio over Ethernet - Ethernet networking - Up to 60 dB independently adjustable gain for each channel - Wireless Workbench software integration - AMX/Creston control - Compatible with AXT600 Axient Spectrum Manager - Yamaha device ID - Upgraded LCD with adjustable contrast and brightness - Audio and RF LED meters with peak indicator - Switchable mic/line output level - 1/2 wave antennas, 2, EA; LI 006: Shure ULXD1 Wireless Bodypack - (H50 band) freq. - AES 256-bit encryption - Proprietary Shure Gain Ranging - Shure SB900 Lithium-Ion rechargeable battery - 5 segment battery fuel gauge - External charging contacts for docked charging with SBC200 Dual Docking Charger - Detachable 1/4 wave antenna, 4, EA; LI 007: Shure ULXD2 SM58 Wireless Mic - (H50 band) freq. - 30 Hz-20 kHz range with flat frequency response - Interchangeable Shure microphone cartridges including the SM58 - AES 256-bit encryption - SBC200 Dual Docking Charger - External charging contacts - Backlit LCD controls - Frequency and power lockout, 4, EA; LI 008: EV QRX 115/75 Speaker - 15" Loudspeaker - two way - full range loudspeaker system - 15" woofer and a 3-inch voice coil compression driver - asymmetrical 75 degree x 50 degree fully rotatable constant-directivity horn., 2, EA; LI 009: QRX 115/75 Road Case - Suitable for two EV QRX 115/75 Speakers -, 1, EA; LI 010: EV QRX 118S Subwoofer - 23.6" x 17.7" x 35.5" - 4" in voice coil driver, 2, EA; LI 011: Crown XTI 2002 Amplifier - 470 Watts per channel at 8 Ohms, 800 watts per channel at 4 Ohms, 1000 watts per channel at 2 Ohms - Enhance Subharmonic Synth - 3 user-defined fan mode controls, normal, early and full speed - Integrated cast-aluminum handles - Locking power cord clip - Updated HiQnet System Architect control software - 50 Presets, 49 user-definable - 2 channels - 1.4V Sensitivity - 3.5"x19"x12.25", 1, EA; LI 012: Audix DP7 Drum Mics - 1 x i5 Snare Mic - 2 x D2 Tom mic - 1 x D4 Kick/Floor Tom mic - 2 x ADX51 Condenser (overhead) mic - 4 x D-Vice (Gooseneck clip) - 1 x D6 Kick Mic - Aluminum Road Case, 1, EA; LI 013: Crown XTI4002 Amplifier - 2 ohm Stereo (per channel) 1600 watts - 4 Ohm Stereo (per channel) 1200 watts - 8 Ohm Stereo (per channel) 650 watts - 8 Ohm Bridge Mono 2400 Watts - 4 Ohm Bridge Mono 3200 watts, 1, EA; LI 014: Gator Rackworks GRW-DRWWRLSS - Cold-rolled 16 gauge steel construction - Fully enclosed drawer and spring-loaded latches - Black power-coated finish - Heavy duty smooth glide drawer slides - Lock knockout, lock and key included - 3RU size drawer with wireless foam nest - Wiereless storage accommodates microphones with clips still attached - body pack and microphone storage area lined with polyethylene foam with tricot covered plywood dividers - Foam storage compartment with cut-outs to hold up to 16 AA batteries - black in color, 1, EA; LI 015: R14U Heavy Duty Amplifier Race Case with casters - 18.25" rack depth from front to rear rack rails - 24.5" rails in height - 4 swivel casters with two braking style - two removable lids - fully padded lids -, 2, EA; LI 016: 50' NL413GA Speakon Cable -, 2, EA; LI 017: SRD3U Rack Drawer - slide out drawer is.047 (18 Gauge) sheet metal - outer shell is.075 (14 gauge) sheet metal. Slides with ball bearing rollers - spring loaded finger latch on front of drawer - key lock on front of drawer - matt black power coating finish - inside are unlined (bare black powder coated metal, 1, EA; LI 018: SRD-PPF-14 - 1" pick and pluck and 1" egg crate foam - 1/4" adhesive backed closed cell foam, 2, EA; LI 019: SHURE PGA-98H - Flexible gooseneck - Integrated horn clamp - Cardioid polar pattern - Black metallic finish - TA4F connector - Electret Condenser - 60Hz-20kHz Frequency response - 850 Ohms Output Impedance - -52dBV/PA Sensitivity at 1 kHz - 27dB SPL-A Self-Noise - Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 for polarity - 4-pin femail TA4F miniature XLR connector - 11-52 VDC phantom power, 2, EA; LI 020: Shure P9TRA425CL Wireless Monitor - In Ear Monitor - Stereo - Auto Frequency Scan - 2x XLR/Combo jack Transmitter inputs - 1x 1/4" (headphone) transmitter output - 1x 1/8" Receiver output - Rechargeable - Bud Earphones - 20Hz-19kHz Earphone frequency response - 64" Earphone cable length, 8, EA; LI 021: Shure PA821A Antenna Combiner - 470-952 MHz RF Carrier Frequency range - +0/-5 dB system gain - 100-240 Vac, 50/60 Hz Input AC Line Voltage - 100 VA Maximum Input Line VA -.42-1.0 Amperes Maximum current Drain - 24 dBm per channel Maximum RF Input Power - +4 dBm, +2 dBm typical Input Signal Indicator Threshold - 50 0 nominal Impedance - BNC-type 8 input, 1 output ACTIVE // 2 Inputs, 1 output expansion port, 1, EA; LI 022: K & M Speaker Stand 21459 - Two adjustable speaker stands with carrying case, 1, EA; LI 023: MSC-1648 Microphone stand or hardware case - 3 Recessed butterfly latches and 8 padded flip handles - Inside Dimensions - 46" Left to Right - 14 1/2" front to back - 12" Depth of trunk bottom interior - 2 3/4" Height of lid interior - 14 3/4" Overall interior height - Outside Dimensions - 50 1/4" left to right - 16 7/8" front to back - 17 1/2" Height (measured on casters) - Black in color, 2, EA; LI 024: Chauvet DJ 4Bar Tri USB 4 x RGB Par System w/Stand - Wash with four Lights - 3-pin, D-FI USB - Sound Active - Tri-color RGB LED - 69W Power Consumption - 5.2"H - 41.3" Width, 1, EA; LI 025: QRX 118S Road Case (Custom Case) - Custom case to fit EV QRX 118S Subwoofer (item #10, 2, EA; LI 026: Cable Package (all cables require to link components), 1, EA; LI 027: Shipping for all items, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, National Guard - South Dakota intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. National Guard - South Dakota is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) in order to be considered for award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Registration must be "ACTIVE" at the time of award. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/notices/7a07b8c4c59400814cce1cd9d6448f67)
 
Place of Performance
Address: Mitchell, SD 57301
Zip Code: 57301-6295
 
Record
SN04510917-W 20170518/170516235059-7a07b8c4c59400814cce1cd9d6448f67 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.