SOLICITATION NOTICE
78 -- Thor 3 Purchase
- Notice Date
- 6/8/2017
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- 1304 North Lighting Road, Hunter Army Airfield, GA 31409
- ZIP Code
- 31409
- Solicitation Number
- w91YH4th0010
- Response Due
- 6/15/2017
- Archive Date
- 12/12/2017
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is w91YH4th0010 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-95. The associated North American Industrial Classification System (NAICS) code for this procurement is 339920 with a small business size standard of 500.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2017-06-15 13:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Stewart, GA 31314 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: Change Plates -12x 2.5lb Change Plate Set (set equaling two plates) oPlate must be green in color oPlate must be 162mm /15mm oMust have 50.4 Collar opening oMust have rubber coating oMust have a tolerance of =/- 10g oMust have a matte finish -12x 5lb Change Plate Set (Set equaling two plates) oPlates will be blue in color oPlates must be 190mm/19mm oMust have 50.4 Collar opening oMust have rubber coating oMust have a tolerance of =/- 10g oMust have a matte finish -12x 10lb Change Plate Set (set equaling two plates) oPlates will be white in color oPlates must be 230mm/26mm oMust have 50.4 Collar opening oMust have rubber coating oMust have a tolerance of =/- 10g oMust have a matte finish SEE SOW, 36, EA; LI 002: 1.1.2Fan Bike - Must be 50.9 L x 23.3 W x 48.4 H (cm 129.4L x 59.3W x123H) when assembled - Must weigh 98.1LBs when assembled - Must have large diameter foot pegs - Must come with over-sized urethane feet - Must have sealed cartridge bottom brackets - Must have forged chro-moly cranks - Must have a 24 inch resistance fan - Must come with 4-way adjustable seat - Must come with sealed cartridge pivots - Must come with 5 year warranty SEE SOW, 1, EA; LI 003: 1.1.3Dumbbells - 1x Set of 55 Pound Dumbbells - Tolerance: +/- 3% - Handle Diameter must be 35MM - Must be made with heavy-duty rubber encased heads. - Must have Easy-grip, ergonomic Chrome-Plated Handle - 1x Set of 80 Pound Dumbbells - Tolerance: +/- 3% - Handle Diameter must be 35MM - Must be made with heavy-duty rubber encased heads. - Must have Easy-grip, ergonomic Chrome-Plated Handle - 1x Set of 85 Pound Dumbbells - Tolerance: +/- 3% - Handle Diameter must be 35MM - Must be made with heavy-duty rubber encased heads. - Must have Easy-grip, ergonomic Chrome-Plated Handle - 1x Set of 90 Pound Dumbbells - Tolerance: +/- 3% - Handle Diameter must be 35MM - Must be made with heavy-duty rubber encased heads. - Must have Easy-grip, ergonomic Chrome-Plated Handle - 1x Set of 95 Pound Dumbbells - Tolerance: +/- 3% - Handle Diameter must be 35MM - Must be made with heavy-duty rubber encased heads. - Must have Easy-grip, ergonomic Chrome-Plated Handle - 1x Set of 100 Pound Dumbbells - Tolerance: +/- 3% - Handle Diameter must be 35MM - Must be made with heavy-duty rubber encased heads. - Must have Easy-grip, ergonomic Chrome-Plated Handle SEE SOW, 6, set; LI 004: 1.1.4Mobility Bands - 20 x 30 Pound Resistance Band - Must be rated to 30 Pounds - Must be red in color - Must be 41 x 0.5 x 0.18 - Must be made of natural latex rubber - 20 x 50 Pounds Resistance Bands - Must be rated to 50 pounds - Must be blue in color - Must be 41" x 0.5" x 0.25" - Must be made of natural latex rubber - 15 x 100 Pounds Resistance Bands - Must be rated to 100 pounds - Must be black in color - Must be 41" x 1.75" x 0.18" - Must be made of natural latex rubber - 6 x 140 Pounds Resistance Bands - Must be rated to 140 pounds - Must be purple in color - Must be 41" x 2.5" x 0.18" - Must be made of natural latex rubber - 6 x 175 Pounds Resistance Bands - Must be rated to 175 pounds - Must be red in color - Must be 41" x 3.25" x 0.18" - Must be made of natural latex rubber SEE SOW, 67, EA; LI 005: - Require 10 of each of the following - Orange.5in band - Must be 12 x.25 x 4.5mm - Must be rated to 15lbs - Red.5in band - Must be 12 x.5 x 4.5mm - Must be rated to 30lbs - Blue.5in band - Must be 12 x.5 x 6.5mm - Must be rated to 50lbs - Green 1 1/8 in band - Must be 12 x 1.13 x 4.5mm - Must be rated to 65lbs - Black 1 Ύ in band - Must be 12 x 1.75 x 4.5mm - Must be rated to 100lbs - Purple 2 ½ - Must be 12 x 2.5 x 4.5mm - Must be rated to 140lbs SEE SOW, 60, EA; LI 006: Ab Exercise Wheel - Require 5 Each - Must be all black in color - Must be 16 in length - Handles must be 5.25 long - Must have a diameter of 31.75mm/ 203.2mm - Must have a nickel-plated steel shaft - Must have a stretch tire with durable rubber tread - Must have sealed bearings SEE SOW, 5, EA; LI 007: 1.1.7Wall Ball Targets - Require 10 each - Must be black in color - Must be 16 in diameter - Plate thickness must be 3/16 - Must have the option to mount target at 9 , 9.5 ,10 , or 12 - Must include 5/8 hardware - Must be compatible with a rogue infinity rig or similar rig with exact platform measurements, 10, EA; LI 008: 1.1.8Step Hurdles - Require 10 of each of the following - 6 Step Hurdles - Must be orange in color - Must be in 9 in length - Must be 18 in width - Must be 6 high - 12 Step Hurdles - Must be orange in color - Must be in 9 in length - Must be 18 in width - Must be 12 high - 18 Step Hurdles - Must be orange in color - Must be in 9 in length - Must be 18 in width - Must be 18 high - 24 Step Hurdles - Must be orange in color - Must be in 9 in length - Must be 18 in width - Must be 24 high SEE SOW, 40, EA; LI 009: 1.1.9Strong Man Sandbags - Require 3 of each of the following types of sandbags - All sand bags will have the following specs - All sand bags will be made of 1000D Mil Spec US Cordura material - All sandbags will have built in filler bags - All sand backs will have zipper and hook-and-loop closure - All sandbags will be black and and 16 in diameter - 100lb Sandbag - 150lb Sandbag - 200lb Sandbag See SOW, 9, EA; LI 010: 1.1.10Womens Barbell - Require 2 of the following barbells - Must has a loadable sleeve length of 13inches. - Must have dual knurl marks on each side of the bar - The bar will have no center knurl. - The bar must be 25MM in diameter. - The bar must be 15KG in weight. - Shaft coating must be black zinc. -The bar must have a PSI tensile strength of 190K. -The bar must be assembled with a bronze bushing system SEE SOW, 2, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: Price. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. No multiple awards will be made. Quotes received through FedBid will be evaluated and awarded on an all-or-nothing basis. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site. The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf "AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures." "52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/55f43bab34716b7106830c8ac3beda02)
- Place of Performance
- Address: Fort Stewart, GA 31314
- Zip Code: 31314
- Zip Code: 31314
- Record
- SN04537758-W 20170610/170608234902-55f43bab34716b7106830c8ac3beda02 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |