MODIFICATION
70 -- INL/Honduras Audiovisual Security Network Equipment
- Notice Date
- 6/15/2017
- Notice Type
- Modification/Amendment
- Contracting Office
- 2401 E St NW (SA-01), Washington, DC 20037
- ZIP Code
- 20037
- Solicitation Number
- JDLRFQ4
- Response Due
- 6/28/2017
- Archive Date
- 12/25/2017
- Point of Contact
- Name: Jeffrey Lloyd, Title: Contract Support Specialist, Phone: 2027369154, Fax:
- E-Mail Address
-
lloydjd@state.gov;
- Small Business Set-Aside
- Total Small Business
- Description
- AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is JDLRFQ4 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-95. The associated North American Industrial Classification System (NAICS) code for this procurement is 334118 with a small business size standard of 1,000.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2017-06-28 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be in the Statement of Work. The INL Support requires the following items, Brand Name or Equal, to the following: LI 001: Multipurpose Interactive Display Mondopad Ultra 85" (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 5, EA; LI 002: Multipurpose Interactive Display Mondopad Ultra 57" (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 3, EA; LI 003: Desktop Computer “ Dell OptiPlex 7440 (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 100, EA; LI 004: Large Projection Display (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 1, EA; LI 005: LCD Projector (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 1, EA; LI 006: DTP Transmitter (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 1, EA; LI 007: DTP Receptor for HDMI (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 1, EA; LI 008: Commercial Power Amplifier (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 1, EA; LI 009: Wall Mount Speakers (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 6, EA; LI 010: Digital Audio Console (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 1, EA; LI 011: Wireless Microphone Set (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 2, EA; LI 012: Document Scanner (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 2, EA; LI 013: Multifunction Printer (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 9, EA; LI 014: Multifunction Printer (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 4, EA; LI 015: Television (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 3, EA; LI 016: Video Recorder (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 1, EA; LI 017: PTZ Security Camera (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 4, EA; LI 018: Fixed Dome Network Camera (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 6, EA; LI 019: Hard Drive (MEET OR EXCEED) See "Appendix A" in Statement of Work, 1, EA; LI 020: UPoE Injector (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 4, EA; LI 021: Monitor (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 4, EA; LI 022: Network Switch (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 1, EA; LI 023: Wireless Access Point (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 25, EA; LI 024: Enterprise Gateway Router (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 1, EA; LI 025: IP PBX-100 Telephone Call Manager (MEET OR EXCEED) See "Appendix A" in Statement of Work, 1, EA; LI 026: Voptech IP20 Phones for Office Use (MEET OR EXCEED) See "Appendix A" in Statement of Work, 50, EA; LI 027: Wall Mount Support (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 8, EA; LI 028: Projector Installation Kit (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 1, EA; LI 029: Wall Mount Support BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 3, EA; LI 030: UPS Protector (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 1, EA; LI 031: HDMI Cable (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 2, EA; LI 032: Cable (BRAND NAME OR EQUAL) See "Appendix A" in Statement of Work, 3, EA; LI 033: Rack (4 columns) (MEET OR EXCEED) See "Appendix A" in Statement of Work, 1, EA; LI 034: Power Rack Mount (MEET OR EXCEED) See "Appendix A" in Statement of Work, 1, EA; LI 035: SHIPPING AND HANDLING See "Appendix B" Delivery Terms, 1, LT; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, INL Support intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. INL Support is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation. Submissions can be sent to clientservices@fedbid.com. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to FAR 4.1102 and other applicable regulations and guidelines. Information can be found at www.sam.gov. Registration must be "ACTIVE" at the time of award. All Bids must be valid for 90 days from the closing date for this solicitation. No exceptions or qualifications. New equipment ONLY, NO grey market or refurbished products. Items must be in original packaging, never used, and not altered in any way. Components of the requested equipment, to include memory, must be manufacturer-approved and may not be compatible, remanufactured, or refurbished equipment. All items must be covered by manufacturer ™s warranty and procured through a manufacturer approved distribution channel. Sellers must be able to document their ability to provide items through manufacturer approved distribution channels upon request. The Seller confirms to have sourced all products submitted in this Bid from manufacturer-approved channels for Federal sales, in accordance with all applicable laws and manufacturer ™s current applicable policies at the time of purchase. Seller must be able to support both the product sale and product pricing, in accordance with applicable manufacturer certification / specialization requirements. If software is provided or included, Seller shall, upon request, provide Buyer with a copy of the End User License Agreement. Seller certifies that all software is licensed originally to Buyer as the original licensee authorized to use the software. Shipping must be free on board (FOB) destination OCONUS (Outside Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. No partial shipments are permitted, unless otherwise specified by Contracting Officer at time of award. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acquisition.gov/far/ New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. This solicitation requires registration with the System for Award Management (SAM) in order to be considered for award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Registration must be "ACTIVE" at the time of award. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/State/A-LM-AQM/A-LM-AQM-WWD-INL/JDLRFQ4/listing.html)
- Place of Performance
- Address: See Statement of Work.
- Zip Code: -
- Zip Code: -
- Record
- SN04546492-W 20170617/170615235719-ce7696abfab1bd8e7f4d920f142262cd (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |