Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF JUNE 18, 2017 FBO #5686
DOCUMENT

C -- Convert Procedure Room to Operatory Design, Project #460-17-102 - Attachment

Notice Date

6/16/2017
 

Notice Type

Attachment
 

NAICS

541330 — Engineering Services
 

Contracting Office

Department of Veterans Affairs;Network Contracting Office 4;20 Montchanin Rd, Rm 116;Greenville, DE;19807
 

ZIP Code

19807
 

Solicitation Number

VA24417R1031
 

Response Due

7/14/2017
 

Archive Date

9/12/2017
 

Point of Contact

Chuck Peck, Contracting Officer
 

E-Mail Address

(302)
 

Small Business Set-Aside

Service-Disabled Veteran-Owned Small Business
 

Description

ACQUISITION INFORMATION: The Wilmington Department of Veterans Affairs Medical Center located at 1601 Kirkwood, Wilmington, PA 19805 is seeking professional Architect and Engineering (A&E) services for Project No. 460-17-102, Design for Convert the Special Procedures Room to an Operatory. This announcement is being issued in accordance with the Selection of Architects and Engineering firms (Public Law 92-582) and implemented in the Federal Acquisitions Regulations (FAR) Part 36. Architectural and Engineering (A&E) firms permitted by law to practice the professions of architecture or engineering are requested to send two copies of an SF 330 (8/2016 Edition) and CD from qualified and eligible firms classified as 100% SERVICE DISABLED VETERAN OWNED SMALL BUSINESS CONCERNS. Firms will be selected for negotiation based on demonstrated competence and qualifications for the required work. This is not a Request for Proposal and an award will not be made with this announcement. This announcement is a request for SF 330s from qualified firms that meet the professional and set aside requirements listed in this announcement. Scope of Work: GENERAL: This project is located at the Wilmington VA Medical. It involves all design work and phasing to: Convert special procedures room 2143 to a Class A operating room, including all required infrastructure improvements and space layout changes to account for patient recovery. SPECIFICS: Special procedures room 2143 is equipped with Phillips imaging equipment that is intended to remain in the room. Current room set up does not permit the use of general anesthesia, limiting procedures that can be conducted in the room. Meet all requirements of the most recent edition of the VA Surgical Design Guide, http://www.cfm.va.gov/til/dGuide.asp Reference pdf file WL-01-02AR for floorplan and location of room 2143. Reference pdf file Site plan for overall site layout. Air handling unit serving room 2143 is located in room 2147. Chilled water is provided from the Clinical Addition chillers located on grade outside of the ground floor mechanical rooms. Emergency power is supplied by generator located in Building 19, which serves ground floor electric room 245 via underground conduit. Per VA Surgical Design Guide and VA HVAC Design Manual, room will require its own dedicated air handling unit and chiller, with back-up chilled water supplied from the plant. Assume existing generator is undersized. Evaluate generator needs and design replacement generator, u/g feeds to electric room 245, automatic transfer switch, and additional electrical switchgear as required. Anticipate converting ultrasound room 2140 to a post-surgery recovery room, meeting all design guide requirements. Design to relocate ultrasound room 2140 to somewhere else on the 2nd floor will be part of this project. Replace existing nurse call system with expansion and tie-in to Hil-Rom backbone run throughout the Building. A/E to work closely with VA facilities staff to develop an efficient and functional design within VA guidelines. The architectural / interior design is to be closely coordinated with the VA Interior Designer. A/E to design and show all infection control / dust prevention measures required. A/E to assess and design any asbestos abatement such as pipe lagging, floor tile and mastic. A/E to provide necessary literature on new technology or installation methods when required, e.g. pipe freezing, etc.. A/E will conduct investigations to ensure recommended methods are compatible within building. OTHER SPECIFICS: A/E to plan all phasing of work in coordination with hospital staff in order to minimize down-time to areas served by the equipment identified for replacement. Identify and correct fire and life safety deficiencies by site inspections. The consultant shall address these items as required to correct deficient items. Evaluate all doors and hardware throughout the project for compliance with life safety code NFPA 101. Identify and correct improperly filled firewall penetrations. All areas in this building are fully sprinkled. This note applies to areas considered under this specific project only, not the Medical Facility as a whole. Construction Waste Management, Specification 01 74 19 is to be included. Fire Safety Peer Review. A/E shall contract an independent Fire and Life Safety Engineer to conduct a fire and life safety peer review of the project at the 75% design phase for compliance with code and VA Design Manuals. The contracted Fire and Safety Engineer will return comments to both the A/E and the VA Project Engineer prior to the corresponding review meeting. A/E shall incorporate all required changes into the design at no additional fee to the VA. The selected A/E firm will be required to collaborate with the Wilmington VA Medical Center (WVAMC) staff and VA Design Guides to determine structural, architectural, mechanical and electrical design requirements. The firm will also attend programming meetings with Medical Center Engineering staff to layout project. Drawings concerning the existing conditions will be provided to the selected A/E firm but are for reference only, until they have been verified by the selected A/E design team. Any deviation between the drawings and actual conditions will be called out on the drawings and reported to the CMC VAMC Engineering Department. The selected A/E firm will also be responsible for providing a construction estimates of contract time and cost associated with their final drawings and specifications. The selected A/E firm shall adhere to the following guidelines: All designs shall be accomplished in accordance with VA guidelines and specifications, which are available on the Internet at http://www.cfm.va.gov/til/. A/E shall pay particular attention to USAF, NFPA, BOCA, VA Handbook and VHA Directives. A/E is responsible for providing all services necessary for design of this project i.e. mechanical, electrical, sampling and monitoring, and control. Any major design deviations from these manuals should be discussed and approved by the Medical Center before the design is incorporated on the contract documents. Site Investigation: Make site visits as required to determine existing as-built conditions affecting this project. Provide any structural, architectural, electrical, and mechanical investigative work including exterior site work, of both existing and designed systems necessary to insure the accuracy of the design. Prepare any measured drawings of existing systems of facility required to insure the accuracy of the design. Provide a CIH to evaluate the impacted building areas for asbestos. Wilmington VA has an asbestos survey which will need to be verified. Provide a CIH to evaluate the impacted building areas for lead based paint. Exterior window frames have not been tested for lead based paint, but exterior doors have and several did test positive. NOTE: Information including drawings and other documentation provided to the A/E is used as reference only. All additional references and specifications are available in VHA s Technical Information Library at address http://www.cfm.va.gov. AutoCAD background drawings will be provided by the VA upon request. The A/E shall field verify all dimensions. A/E shall field verify every aspect that relates to the project. Coordinate site visits with the Project Engineer. General Requirements: A/E firm shall have licensed professional architects/engineers currently registered in the state of Delaware or in a state of which Delaware has recognized the engineering license. A/E shall be responsible to provide a complete bid package to the Contracting Officer consisting of plans (signed Mylar originals), specifications, cost estimates and their related information. Drawings shall be submitted in AutoCAD Release 2014 and PDF, specifications in Microsoft Word and PDF and cost estimate in Microsoft Excel. A complete bid package will be submitted on a CD-RW. The contract drawings shall have a cover sheet, which shall include but not limited to the following information: Department of Veterans Affairs Logo Drawing Index AE Firm Name and Logo General Notes All drawings shall be scaled. Each professional discipline shall be separately designed and be sealed by the respective A/E. All design work shall be coordinated by the prime A/E, who shall be responsible for all field investigation, site surveys, measurements and engineering design calculations. The A/E shall assure compliance with and design according to all local, federal, Department of Veterans Affairs, OSHA Regulations, state laws, regulations, codes and ordinances. AE shall prepare specifications using the VA master specification. Plans shall be drawn using standard professional and acceptable engineering drafting skills, scales and standards. The A/E shall be responsible to provide and show in scale plans, elevations and details required to construct this project in which the prospective bidder is clear on the proposed intent and scope of work. A/E shall define and indicate on plans all new and existing conditions. A/E shall show, draw, locate, define, denote and detail all points of connection of new work to the existing. A/E shall plan, define, detail, draw and show on the contract documents exact routing of any new utility proposed for this project. A/E shall as part of this project, physically inspect each new routing, provide routings and/or rerouting of existing utilities to prevent any conflicts. Prior to review submissions all plans are to be reviewed by a fire protection engineer and documented accordingly by the A/E. Sustainable Design and Energy Reduction: EXPECTATION: All designs shall be in accordance sustainable design and energy reduction. Federal Mandates require all Federal government construction projects to comply with sustainability and energy reduction requirements.   To this end, the VA is committed to the Guiding Principles for Federal Leadership in High Performance and Sustainable Buildings. The U.S. Green Building Council s (USGBC) Leadership in Energy and Environmental Design (LEEDR) rating system provides a well known industry framework to achieve the Federal Mandates.   After complying with all the credits to achieve the Federal Mandates, this project should be able to achieve LEED Silver status with minimum extra effort and cost.   In the event the project design cannot achieve LEED status, Life-cycle costing should be used to determine viable energy reduction goals, as scope and budget permit.   Where the Mandates are not achievable, written justification must be provided.   An Architect and Engineering (A&E) firm that is selected to design a VA project should already have demonstrated their sustainable design capabilities through the VA selection process.   A/E firms will find the criteria and procedures in the VA s Sustainable Design and Energy Reduction Manual, a baseline for developing the design according to the unique conditions that each project represents. Environmental/Occupational Safety and Health (EOSH): EXPECTATION: Each project design shall contain language that addresses all applicable EOSH requirements. Regulatory Compliance EOSH requirements for work performed at the above location can be found in: Volume 29 of the Code of Federal Regulations, Part 1910 Occupational Safety for General Industry Volume 29 of the Code of Federal Regulations, Part 1926 Occupational Safety for The Construction Industry Volume 40 of the Code of Federal Regulations Protection of The Environment Volume 49 of the Code of Federal Regulations, Part 397 Transportation of Hazardous Materials Title 7 of the Delaware Code Conservation Title 16 of the Delaware Code Health and Safety Specifications The VA Master Construction Specifications contain work procedures and material requirements designed to meet regulatory compliance requirements. Whenever possible, the Master Construction Specifications must be used as the basis for each project design. A complete list of these specifications can be viewed at the following website: http://www.cfm.va.gov. Specifications which address EOSH requirements include, but are not limited to, the following:   SECTION 01 00 00 General Requirements SECTION 01 57 19 Temporary Environmental Controls   SECTION 01 74 19 Construction Waste Management SECTION 02 82 11 Traditional Asbestos Abatement SECTION 02 82 13.13 Glovebag Asbestos Abatement SECTION 02 82 13.19 Asbestos Floor Tile and Mastic Abatement SECTION 02 82 13.31 Asbestos Transite Abatement SECTION 02 82 13.41 Asbestos Abatement for Total Demolition Project SECTION 02 83 33.13 Lead-Based Paint Removal and Disposal Evaluation Criteria: The A&E selection criteria for this acquisition are listed below:. 1. Team proposed for this project                                            a. Background of Personnel b. Project Manager                                           c. Other key personnel                                           d. Consultants                       2. Proposed Management Plan                                               a. Team organization                                                       (1) Design Phase                                                       (2) Construction Phase                       3. Previous Project Experience of Proposal Team                       4. Response Time (Submittals and RFIs)                                               a. Prime Firm                                               b. Consultants                       5. Proposed Design Approach                                               a. Proposed design philosophy                                               b. Demonstrate an Understanding of the Directive c. Anticipated Problems and Potential Solutions d. Descriptive Innovative Approaches in Production and Design                       I. Contract Award Procedure: Interested A&E firms shall submit two (2) copies of SF330 (8/2016 Edition) and CD with appropriate documentation and information to Chuck Peck, Contracting Officer (460/90C), Wilmington VA Medical Center, 20 Montachnin Rd, Contracting Office, Rm 116, Greenville, DE 19807 by close of business (4:00 PM, EST), July 14, 2017. A&E firms shall be registered at www.sam.gov and www.vetbiz.gov. If available, please include your firm's VetBiz.gov SDVOSB status verification. Failure of a proposed SDVOSB A&E firm to be certified by the CVE at the time of the SF330 is submitted shall result in elimination from further consideration for award. Following an evaluation of the qualifications and performance data submitted, three or more firms considered to be the most highly qualified firms to provide the type of services require may be chosen for interviews. After interviews, the most highly qualified firm will be issued the solicitation and requested to submit a proposal. The Government will not pay, nor reimburse, any costs associated with responding to this announcement. The Government is under no obligation to award a contract as a result of this announcement. A&E Firms will be selected based on demonstrated competence and qualifications for the required work. NAICS 541330 and size standard $15.0M apply. The award of a Firm Fixed-Price contract is contemplated and is subject to the availability of FY17 funding. The construction magnitude is between $2,000,000 and $5,000,000.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/VA/PiVAMC646/PiVAMC646/VA24417R1031/listing.html)
 

Document(s)

Attachment
 

File Name: VA244-17-R-1031 VA244-17-R-1031_1.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3589911&FileName=VA244-17-R-1031-000.docx)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3589911&FileName=VA244-17-R-1031-000.docx

 

File Name: VA244-17-R-1031 P01 SOW Atch 1 WL-01-02AR.pdf (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3589912&FileName=VA244-17-R-1031-001.pdf)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3589912&FileName=VA244-17-R-1031-001.pdf

 

File Name: VA244-17-R-1031 P01 SOW Atch 2 Site Plan.pdf (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3589913&FileName=VA244-17-R-1031-002.pdf)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3589913&FileName=VA244-17-R-1031-002.pdf

 

Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 

Place of Performance

Address: Wilmington VA Medical Center;1601 Kirkwood Highway;Wilmington, DE

Zip Code: 19805
 

Record

SN04548200-W 20170618/170616235151-f723d1010927cae11ef1e4bf7e033d09 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |