SOURCES SOUGHT
47 -- Restrictor, fluid flow - Market Survey
- Notice Date
- 6/19/2017
- Notice Type
- Sources Sought
- NAICS
- 336413
— Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, P O Box 3990, Columbus, Ohio, 43218-3990, United States
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7M317R0015
- Archive Date
- 7/11/2017
- Point of Contact
- mandy l. phipps-kuhlman, Phone: 6146928675
- E-Mail Address
-
mandy.phipps-kuhlman@dla.mil
(mandy.phipps-kuhlman@dla.mil)
- Small Business Set-Aside
- N/A
- Description
- Market Survey DLA Land and Maritime is preparing to solicit a one-time buy for 138 each, NSN 4730-01-075-0943, restrictor, fluid flow. The approved manufacturers and part numbers for this NSN are: United Technologies Corporation (55820), p/n 169363-2 The Lee Company (92555), p/n VDLX0501050A DLA Land and Maritime does not possess technical data for this NSN. Sources interested in becoming an approved source for this NSN must submit the appropriate information as outlined in DLAD 52.217-9002, Conditions for Evaluation and Acceptance of Offers for Part Numbered Items. Sources interested in providing an offer on this solicitation should complete the attached market survey and return the completed copy to Mandy Phipps-Kuhlman via email at mandy.phipps-kuhlman@dla.mil by 4:00 PM EST on 06/26/2017. Item Description: RESTRICTOR, FLUID FLOW. E/I F-16 AIRCRAFT. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITICAL TECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS: https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/defaul t.aspx OR BY WRITING TO: DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATTLE CREEK, MI 49037-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25. NOTE: THIS IS A RESTRICTED SOURCE ITEM MANUFACTURED TO THE OEM DRAWING(S) CITED HEREIN AND AS OF THE DATE OF THIS SOLICITATION ONLY THE SOURCE(S) CITED BELOW HAS/HAVE BEEN PREQUALIFIED TO MANUFACTURE THE ITEM. OFFERS BASED ON SUPPLYING OTHER MANUFACTURER'S PARTS SHALL BE ACCOMPANIED BY TECHNICAL AND OTHER DATA SUFFICIENT TO EVALUATE THE ITEM FOR THE INTENDED APPLICATION AS PER DLAI 3200.1, ENCL 6. SAID EVALUATION MAY TAKE AN EXTENDED PERIOD OF TIME AND MAY THEREFORE BE APPLICABLE TO FUTURE PROCUREMENTS. FINAL APPROVAL AUTHORITY REST WITH THE GOVERNMENT DESIGN CONTROL ACTIVITY. CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. CRITICAL APPLICATION ITEM UNITED TECHNOLOGIES CORPORATION 55820 P/N 169363-2 THE LEE COMPANY DBA 92555 P/N VDLX0501050A IAW BASIC DRAWING NR 55820 169363 REVISION NR D DTD 04/14/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 55820 169363-2 REVISION NR DTD 05/20/2015 PART PIECE NUMBER: PKGING DATA-QUP:001 SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951. Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply: •,,All Section "D" Packaging and Marking Clauses take precedence over ASTM D3951. •,,In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be "CP" Commercial Pack. •,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPE7M317R0015/listing.html)
- Record
- SN04549137-W 20170621/170619234700-2ea66f0b083542c5cac21ec25948f17b (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |