MODIFICATION
53 -- Shaft to Rotor Hub Stud - Amendment 1
- Notice Date
- 6/19/2017
- Notice Type
- Modification/Amendment
- NAICS
- 332722
— Bolt, Nut, Screw, Rivet, and Washer Manufacturing
- Contracting Office
- Department of the Interior, Bureau of Reclamation, BOR - All Offices, Denver Federal Center, Building 67, Room 380, Denver, Colorado, 80225, United States
- ZIP Code
- 80225
- Solicitation Number
- R17PS00904A
- Point of Contact
- Lynn Wahl, Phone: 509-754-0223, Don Richer, Phone: 509-754-0265
- E-Mail Address
-
jwahl@usbr.gov, dricher@usbr.gov
(jwahl@usbr.gov, dricher@usbr.gov)
- Small Business Set-Aside
- N/A
- Description
- Brand Name Justification This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The solicitation number is R17PS00904A and is being issued as a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-94 and 2005-95. This requirement is unrestricted. The North American Industry Classification System (NAICS) Code for this acquisition is 332722, Bolt, Nut, Screw, Rivet, and Washer Manufacturing. The Product Service Code is 5306, Bolts. 1. Requirement The Bureau of Reclamation intends to award a Firm Fixed Price Purchase Order for the acquisition of the following brand name requirement: CLIN 0010 Shaft to rotor hub stud with jack bolt tensioner nut. Superbolt, Inc; 120 each at $ _______ for a total of $ _________ Total price shall include all applicable fees and taxes. 2. Specifications The purpose of this specification is to procure Bolt-style multi-jack bolt tensioners for use in the TPP. The bolt style multi-jack bolt tensioners will be used to work on Power Generation Equipment located in the Third Power Plant (TPP) at Grand Coulee Dam. The Bolt-style multi-jack bolt tensioners shall have the following salient characteristics: Salient Characteristics: Furnish 120 each generator shaft to rotor hub studs with jack bolt tensioner nut • MATERIALS A. Studs: ASTM A 193 Grade B7 B. Nuts: ASTM A194 2H • DESIGN • Threads shall be in accordance with ASME B 1.1 • Studs: End Designation: End A and End B End A End B Length: 28.5 inches minimum • Threads shall be exposed through nut; nut height determines overall length • Include hex in total length, additional 0.5 in on End A • Diameter: 3.25 inches • Threads: 3.25-8UN-3A: • Each end shall have threads with established lengths from the associated end: • 6.75 inches from End A • Minimum thread length, can increase if nut requires more thread length • Does not include the 0.5 in. hex height • 5.00 inches from End B • Area between threads shall be machined smooth, maximum Ra 250 or better • Hex on end A: • 2.50 inches across flats • Used for inserting stud into shaft threads • Include one lock wire hole at 0.0625 in. diameter, through the junction of two adjacent hex flats • Used successfully secure against rotation • Machine the ends smooth, Ra 250 or better, and perpendicular to the centerline of the stud • Ends shall be parallel within 0.002 in. for ultrasonic length inspection NUTS: • Multi-jackbolt style • Jacking bolt threads standards are to be determined by Contractor to minimize damage between the threads, such as galling or fretting • Design the jacking bolt system such that the pre-stress can be achieved with hand tools. Rotational retention System shall be able to withstand vibration and rotational forces experienced during turbine operation. The design shall prevent the nut from backing off the required preload during operation. • Jacking bolt nuts shall have lock wire hole with minimum diameter of 0.0625 in. • Locking wire and appurtenances shall be provided for each bolt system to successfully secure the jacking bolts from rotating. 3. Delivery 1. Delivery shall be FOB Destination. Delivery address is Hwy 155, Warehouse B, Door 6, Grand Coulee, WA 99133. Delivery hours are from 7:30 am to 3:30 PM pacific time. Deliveries will not be accepted on Federal holidays. 4. Provisions and Clauses 1. This RFQ incorporates one or more provisions and clauses by reference. The full test of the provisions and clauses may be accessed electronically at https://www.acquisition.gov/far/ The provision at 52.212-1, Instructions to Offerors -- Commercial, applies to this acquisition. The term "offer" in 52.212-1 is replaced with "quote". The following addendum to 52.212-1 also applies: 52.252-1 Solicitation Provisions Incorporated by Reference 52.252-5 Authorized Deviations in Provisions; 52.204-16 Commercial and Government Entity Code Reporting In addition, the following additional clauses also apply as an addendum to 52.212-1: ADDENDUM TO 52.212-1 WBR 1452.211-80 Notice of Intent to Acquire Metric Products and Services -- Bureau of Reclamation - (Mar 1993) (a) Metric Transition Plan. The Department of the Interior on December 6, 1991, issued a Metric Transition Program (Part 758 Department Manual Chapter 1) to establish and describe the program's policies and responsibilities. The Bureau of Reclamation (Reclamation), has developed a Metric Transition Plan to implement metrication in Reclamation. This plan describes Reclamation's overall strategy for using the metric system, defines general requirements and procedures for carrying out the transition, and details the tasks with milestones for Reclamation offices to complete. (b) The Omnibus Trade and Competitiveness Act of 1988 (Trade Act). (1) Section 5164 of Public Law 100-418, the Trade Act, amended the Metric Conversion Act of 1975 and designated the metric system of weights and measures for United States trade and commerce. (2) The Trade Act establishes September 30, 1992, as the implementation date (to the extent economically feasible) for Federal agencies to use the metric system of measurement in its procurements, grants, and other business-related activities. (3) The Trade Act permits exceptions to the use of the metric system to the extent that such use is impractical or is likely to cause significant inefficiencies or loss of markets to United States firms, such as when foreign competitors are producing competing products in non-metric units. (4) As a result of the Trade Act, the President issued Executive Order 12770 dated July 25, 1991, to implement the congressional designation of the metric system as the preferred system of weights and measures for United States trade and commerce. (c) Bureau of Reclamation Implementation. As a result of the Trade Act, Reclamation will, to the maximum extent practicable, use hard conversion and soft conversion metric systems in designing its construction projects, eventually phasing out use of the soft conversion metric system. Exceptions to this policy will only be made when such use is impractical, produces inefficiencies or market losses, or is not economically feasible. (d) Expected Results. Reclamation expects its support of the metric system to result in increased use of the metric system by U.S. contractors, thereby increasing their ability to compete in the international marketplace. Increasing use of the metric system by U.S. contractors will eliminate possible restrictions on their bidding in the international marketplace and will eliminate any impact of economic blocks by metric countries restricting the acceptance of non-metric products. (End provision) ADDENDUM TO 52.212-1 1452.215-71 Use and Disclosure of Proposal information--Department of the Interior - (Apr 1984) (a) Definitions. For the purposes of this provision and the Freedom of Information Act (5 U.S.C. 552), the following terms shall have the meaning set forth below: (1) 'Trade Secret' means an unpatented, secret, commercially valuable plan, appliance, formula, or process, which is used for making, preparing, compounding, treating or processing articles or materials which are trade commodities. (2) 'Confidential commercial or financial information' means any business information (other than trade secrets) which is exempt from the mandatory disclosure requirement of the Freedom of Information Act, 5 U.S.C. 552. Exemptions from mandatory disclosure which may be applicable to business information contained in proposals include exemption (4), which covers 'commercial and financial information obtained from a person and privileged or confidential,' and exemption (9), which covers 'geological and geophysical information, including maps, concerning wells.' (b) If the offeror, or its subcontractor(s), believes that the proposal contains trade secrets or confidential commercial or financial information exempt from disclosure under the Freedom of Information Act, (5 U.S.C. 552), the cover page of each copy of the proposal shall be marked with the following legend: 'The information specifically identified on pages ___ of this proposal constitutes trade secrets or confidential commercial and financial information which the offeror believes to be exempt from disclosure under the Freedom of Information Act. The offeror requests that this information not be disclosed to the public, except as may be required by law. The offeror also requests that this information not be used in whole or part by the Government for any purpose other than to evaluate the proposal, except that if a contract is awarded to the offeror as a result of or in connection with the submission of the proposal, the Government shall have the right to use the information to the extent provided in the contract. (c) The offeror shall also specifically identify trade secret information and confidential commercial and financial information on the pages of the proposal on which it appears and shall mark each such page with the following legend: 'This page contains trade secrets or confidential commercial and financial information which the offeror believes to be exempt from disclosure under the Freedom of Information Act and which is subject to the legend contained on the cover page of this proposal.' (d) Information in a proposal identified by an offeror as trade secret information or confidential commercial and financial information shall be used by the Government only for the purpose of evaluating the proposal, except that (i) if a contract is awarded to the offeror as a result of or in connection with submission of the proposal, the Government shall have the right to use the information as provided in the contract, and (ii) if the same information is obtained from another source without restriction it may be used without restriction. (e) If a request under the Freedom of Information Act seeks access to information in a proposal identified as trade secret information or confidential commercial and financial information, full consideration will be given to the offeror's view that the information constitutes trade secrets or confidential commercial or financial information. The offeror will also be promptly notified of the request and given an opportunity to provide additional evidence and argument in support of its position, unless administratively unfeasible to do so. If it is determined that information claimed by the offeror to be trade secret information or confidential commercial or financial information is not exempt from disclosure under the Freedom of Information Act, the offeror will be notified of this determination prior to disclosure of the information. (f) The Government assumes no liability for the disclosure or use of information contained in a proposal if not marked in accordance with paragraphs (b) and (c) of this provision. If a request under the Freedom of Information Act is made for information in a proposal not marked in accordance with paragraphs (b) and (c) of this provision, the offeror concerned shall be promptly notified of the request and given an opportunity to provide its position to the Government. However, failure of an offeror to mark information contained in a proposal as trade secret information or confidential commercial or financial information will be treated by the Government as evidence that the information is not exempt from disclosure under the Freedom of Information Act, absent a showing that the failure to mark was due to unusual or extenuating circumstances, such as a showing that the offeror had intended to mark, but that markings were omitted from the offeror's proposal due to clerical error. (End Provision) The provision at 52.212.2, Evaluation, Commercial Items applies to this acquisition. The evaluation factor used is: PRICE. The following addendum to 52.212-2 also applies: 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran Representations and Certifications. In addition, the following additional clauses also apply as an addendum to 52.212-2: ADDENDUM TO 52.212-2 WBR 1452.225-82 Notice of World Trade Organization Government Procurement Agreement Evaluations-Bureau of Reclamation - (May 2005) In accordance with the Agreement on Government Procurement, as amended by the Uruguay Round Agreements Act (Pub. L. 103-465), and other trade agreements, FAR Subpart 25.4, World Trade Organization Government Procurement Agreement, applies to Bureau of Reclamation acquisitions. In order to apply trade agreements unique to Reclamation, the contracting officer will (irrespective of any other provision or clause of this solicitation) evaluate acquisitions at or above the dollar thresholds listed in FAR 25.402(b) without regard to the restrictions of the Buy American Act. (End of Provision) The provision at 52.212-3, Offeror Representations and Certifications applies to this solicitation and must be completed and be active on line at http://www.sam.gov. Prospective contractor is advised to ensure that the NAICS code identified for this procurement is contained in its online representations and certifications in the System for Award Management registry. The following addendum to 52.212-3 applies: 52.203-18 Prohibition on Contracting with Entities That Require Certain Internal Confidentiality Agreements or Statements- Representation. The clause at 52.212-4, Contract Terms and Conditions -- Commercial Items, applies to this acquisition. The following clauses are addenda to 52.212-4: 52.252-2, Clauses Incorporated by Reference 52.252-6 Authorized Deviations in Clauses 52.204-18 Commercial and Government Entity Code Maintenance; 52.232-40 Providing Accelerated Payments to Small Business Subcontractors 52.242-15 Stop-Work Order In addition, the following additional clauses also apply as an addendum to 52.212-4: ADDENDUM TO 52.212-4 DOI-AAAP-0028 Electronic Invoicing and Payment Requirements-Invoice Processing Platform (IPP) - APR 2013) Payment requests must be submitted electronically through the U. S. Department of the Treasury's Invoice Processing Platform System (IPP).'Payment request' means any request for contract financing payment or invoicing payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions-Commercial Items included in commercial item contracts. The IPP website address is: https://www.ipp.gov. Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice: None____________________ The Contractor shall also submit an electronic copy of the IPP invoice to the Contract Specialist/Contracting Officer at jwahl@usbr.gov once the invoice has been submitted to IPP. Failure to email the invoice may cause significant delay or possible rejection of your payment request. The Contractor must use the IPP website to register access and use IPP for submitting requests for payment. The Contractor Government Business Point of Contact (as listed in SAM) will receive enrollment instructions via email from the Federal Reserve Bank of Boston (FRBB) within 3-5 business days of the contract award date. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email ippgroup@bos.frb.org or phone (866) 973-3131. If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation. (End of Local Clause) ADDENDUM TO 52.212-4 WBR 1452.222-81 Employment Verification It is the contractor's responsibility to verify employment of its employees. FAR 9.406(b)(2) Causes for Debarment, specifically states, based on a determination by the Secretary of Homeland Security or the Attorney General of the United States, any contractor not in compliance with the INA is a cause for debarment. (End of clause) The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders -Commercial Items, applies to this acquisition. The following additional clauses cited in paragraph b of 52.212-5 are applicable: 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards; 52.209-6 Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment; 52.219-28 Post Award Small Business Program Representation; 52.222-3, Convict Labor; 52.222-19 Child Labor-Cooperation with Authorities and Remedies; 52.222-21 Prohibition of Segregated Facilities; 52.222-26 Equal Opportunity; 52.222-36 Equal Opportunity for Workers with Disabilities; 52.222-50 Combating Trafficking in Persons; 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving; 52.225-3 Buy American-Supplies -Free Trade Agreements-Israeli Trade Act 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer-System for Award Management 5. Quotes Due & Contacts: 1. Quotes are due by 5:00 PM PST on June 27, 2017. Please submit via email to both jwahl@usbr.gov and dricher@usbr.gov. Include in the subject line: R17PS00904A Multi Jackbolt Tensioner. 2. Contact Lynn Wahl, Contract Specialist, via email at jwahl@usbr.gov or Don Richer, dricher@usbr.gov for information regarding this solicitation.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/3bd1743837185d27a73149748c7702f1)
- Record
- SN04549151-W 20170621/170619234710-3bd1743837185d27a73149748c7702f1 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |