SOLICITATION NOTICE
66 -- Motorized Mirror Holder
- Notice Date
- 6/23/2017
- Notice Type
- Presolicitation
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, AFRL/RIK - Rome, 26 Electronic Parkway, Rome, New York, 13441-4514, United States
- ZIP Code
- 13441-4514
- Solicitation Number
- FA8751-17-Q-0333
- Archive Date
- 7/28/2017
- Point of Contact
- Richard C Childres, Phone: 315-330-4194
- E-Mail Address
-
richard.childres@us.af.mil
(richard.childres@us.af.mil)
- Small Business Set-Aside
- N/A
- Description
- This is a Notice of Proposed Contract Action under the FAR Part 12 Acquisition of Commercial Items and FAR Part 13 Simplified Acquisition Procedures. This notice is for information only; a solicitation will not be issued. THIS IS NOT A REQUEST FOR QUOTATION. No contract will be awarded on the basis of offers received in response to this notice. The associated North American Industry Classification System (NAICS) code is 334516 with a small business size standard of 1,000 employees. The Government requires the following supplies manufactured by OWIS GmbH: Qty 4 P/N 46.020.13KN KSHM 25- RE-MDS Motorized flip mirror holder for ø 12.5 mm / 12.7 mm (0.5") x 3 mm with base plate, with DC gear motor, deflection to the right Qty 3 P/N 46.025.13KN KSHM 25- LI-MDS Motorized flip mirror holder for ø 12.5 mm / 12.7 mm (0.5") x 3 mm with base plate, with DC gear motor, deflection to the left Qty 7 P/N 46.042.26KN Special: KSHM 40- 7-RE-MDS Flip Mirror Holder, motorized, for unmounted mirrors and beamsplitters with Ø 25 mm / 25.4 mm (1") x 5.1 - 7 mm, deflection to the right, with disc springs fortheta, phi and Z adjustment, DC gear motor and mechanical limit switches - aluminum reflection-poor, black anodized - for use with SYS 40 with slide RT 40-10-R- WV 40 - base plate 40 x 40 x 5 mm - angular adjustment range ± 1.1°(theta/phi) - adjustment of the centre rotation along Z axis 0.5 mm (angular adjustment range reduced) - for optics with 10 g - swing angle 45° - switching time 1.5 s (NG-E02) - repeatability < 100 μrad - motor data: nominal voltage max. 24 V, motor current max. 35 mA - aperture Ø 16.5 mm (at 45°) - M6 thread to mount on pins - on each side 2x M2.5 threads in 20 mm distance for fastening - 2 M3 counterbores in 20 x 20 mm grid for fastening - 2 x 2 M3 threads in 20 mm distance (centric, cross-wise) - connection: 5-pin connector (male) Qty 6 P/N 46.047.26KN Special: KSHM 40- 7-LI-MDS Flip Mirror Holder, motorized, for unmounted mirrors and beamsplitters with Ø 25 mm / 25.4 mm (1") x 5.1 - 7 mm, deflection to the left, with disc springs for theta, phi and Z adjustment, DC gear motor and mechanical limit switches - aluminum reflection-poor, black anodized - for use with SYS 40 with slide RT 40-10-R- WV 40 - base plate 40 x 40 x 5 mm - angular adjustment range ± 1.1°(theta/phi) - adjustment of the centre rotation along Z axis 0.5 mm (angular adjustment range reduced) - for optics with 10 g - swing angle 45° - switching time 1.5 s (NG-E02) - repeatability < 100 μrad - motor data: nominal voltage max. 24 V, motor current max. 35 mA - aperture Ø 16.5 mm (at 45°) - M6 thread to mount on pins - on each side 2 M2.5 threads in 20 mm distance for fastening - 2x M3 counterbores in 20 x 20 mm grid for fastening - 2 x 2 M3 threads in 20 mm distance (centric, cross-wise) - connection: 5-pin connector (male) QTY 20 P/N 52.669.0012 NG-E02 Control unit for flip mirror holder with TTL input including switch and connecting cable Qty 20 P/N DSP-9V Universal Power Supply 9-12V DC The Flip Mirror Holders, made by OWIS GmbH, have a combination of repeatability specification and compact size and also are motorized for automation and accept standard mirror sizes. Market research was conducted and determined the absence of an acceptable equal to the OWIS items. A sole-source contract action with Pacific Laser Equipment, 17602 17th St Suite 102-182 Tustin, CA 92780, is contemplated. PLE is the sole authorized reseller and distributor of the required items with rights to convey original equipment manufacturer warranties and service agreements. This is a notice of proposed contract action and not a request for competitive proposals; however, all responsible sources may submit a capability statement or proposal, which shall be considered by the agency. All inquiries should be sent by email to richard.childres @us.af.mil. Responses must be submitted by the date/time listed on the notice. Any response to this notice must show clear and convincing evidence that competition would be advantageous to the Government in future procurements. Responses received will be evaluated; however a determination by the Government not to compete the proposed procurement based upon responses to this notice is solely within the discretion of the Government. The Government anticipates an award date on or before 14 JULY 2017. A Sole Source Justification will be attached to the subsequent Notice of Award.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/AFRLRRS/FA8751-17-Q-0333/listing.html)
- Place of Performance
- Address: Department of the Air Force, Air Force Materiel Command, AFRL – Rome Research Site, AFRL/Information Directorate, Rome, New York, 13441, United States
- Zip Code: 13441
- Zip Code: 13441
- Record
- SN04555962-W 20170625/170623234804-b0dcffb53eb2c118aaa1c6ff70257635 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |