Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF JULY 13, 2017 FBO #5711
AWARD

Y -- Building 66048 at Kirtland AFB

Notice Date
7/11/2017
 
Notice Type
Award Notice
 
NAICS
236220 — Commercial and Institutional Building Construction
 
Contracting Office
Department of the Army, U.S. Army Corps of Engineers, USACE District, Albuquerque, Attn: CESPA-CT, 4101 Jefferson Plaza NE, Albuquerque, New Mexico, 87109-3435, United States
 
ZIP Code
87109-3435
 
Solicitation Number
W912PP-17-T-0062
 
Archive Date
7/26/2017
 
Point of Contact
Glenda D. Kohlieber, Phone: 5756524135
 
E-Mail Address
glenda.d.kohlieber@usace.army.mil
(glenda.d.kohlieber@usace.army.mil)
 
Small Business Set-Aside
N/A
 
Award Number
W912PP-17-P-0051
 
Award Date
7/11/2017
 
Awardee
Weil Construction Inc., 3344 PRINCETON DR NE, ALBUQUERQUE, New Mexico 87107, United States
 
Award Amount
$86481.98
 
Line Number
0001
 
Description
"This action was awarded as an 8(a) Sole Source Set-Aside under the authority of section 8(a) of the Small Business Act." The contractor shall furnish all parts, material, labor, equipment and supervision necessary to complete the work for Building 66048 Repair RDS Front Office. a.Demolition 1.Demo all carpet in corridor 121D and 121C as shown on the drawings. 2.Remove existing door assembly from room 138 and salvage for reinstallation. 3.Demo wall assembly in its entirety around room 138 as shown on the drawings. 4.Remove all electrical, communication, and LAN receptacles, boxes, outlets, wires, switches and conduits from demolished wall as shown on the drawing. Pull wires back to nearest junction box if not needed. Coil unused communication and LAN cables above the ceiling grid. 5.Demo ceiling grid and tiles as needed to remove wall as shown on the drawings. Prep ceiling for new work. 6.Demo wall for new door into room 135 as shown on the drawings. b.Construction 1.Install new carpet tiles in areas as shown on the drawings. Provide transition strips for all doorways and termination points as needed. 2.Install new wall base as shown on the drawings. Match existing. 3.Repair all walls in the work area as needed. 4.Paint all walls as shown on the drawings. 5.Install or repair the ceiling grid and replace ceiling tiles as shown on the drawings. 6.Relocate switch and/or rewire light fixtures in room 138. 7.Relocate and rewire light switches for corridor lights as shown on the drawings. 8.Install two new storefront door assemblies as shown on the drawings. 9.Install new rough-in boxes and conduits to support card reader access as shown on the drawings. 10.Construct new wall in room135 as shown on the drawings. 11.Reinstall existing door, frame, and hardware at the new room created in room 135 as shown on the drawings.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA47/Awards/W912PP-17-P-0051.html)
 
Record
SN04574976-W 20170713/170711235438-56bd30e26741c61c9ff2df5c82d86596 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.