MODIFICATION
70 -- VTC SUITE
- Notice Date
- 7/13/2017
- Notice Type
- Modification/Amendment
- Contracting Office
- Directorate of Contracting, FORT GORDON, GA 30905
- ZIP Code
- 30905
- Solicitation Number
- W91249-0010985296-01
- Response Due
- 7/18/2017
- Archive Date
- 1/14/2018
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- N/A
- Description
- CANCELLATION NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is W91249-0010985296-01 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-95. The associated North American Industrial Classification System (NAICS) code for this procurement is 2005-95 with a small business size standard of 1,000.00 employees. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2017-07-18 16:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be FORT GORDON, GA 30905 The MICC Fort Gordon requires the following items, Brand Name or Equal, to the following: LI 001: VTC EQUIPMENT, 1, EA; LI 002: Cisco SX80 Codec,Spkr Track 60,Touch 10 MFR Part#:CTS-SX80-IPST60-K9 MFR Name: CISCO SYSTEMS (CISCOPRO) Description: Cisco SX80 Codec, Speaker Track 60, Touch 10, 1, EA; LI 003: Pwr Cord US 1.8m Black YP-12 To YC-12 FFP MFR Part#: PWR-CORD-US-A MFR Name: CISCO SYSTEMS (CISCOPRO) Description: Pwr Cord US 1.8m Black YP-12 To YC-12, 1, EA; LI 004: Lic key to activate sw encryption module MFr Part: LIC-CE-CRYPTO-K9 MFR Name: CISCO SYSTEMS (CISCOPRO) Description: License key to activate sw encryption module, 1, EA; LI 005: SX80 MultiSite Software Option Mfr Part#: LIC-SX80-MS Mfr Name: CISCO SYSTEMS (CISCOPRO) Description: SX80 MultiSite Software Option, 1, EA; LI 006: CAB-PWR-ST-SHORT Mfr Part#: CAB-PWR-ST-SHORTCISCO MFR Name: SYSTEMS (CISCOPRO) Description: Two 12V power cables (0.45m & 0.2m) for SpeakerTrack 60, 1, EA; LI 007: CAB-DVI-VGA-PHOEN Mfr Part#: CAB-DVI-VGA-PHOEN Mfr Name: CISCO SYSTEMS (CISCOPRO) Description: Presentation cable w/audio, VGA/Jack to DVI/Phoenix, 1, EA; LI 008: CTS-ST-ARR60-WMK Mfr Part#: CTS-ST-ARR60-WMKCISCO Mfr Name: SYSTEMS (CISCOPRO) Description: Wall Mount Kit for Speaker Track 60 Microphone Array, 1, EA; LI 009: CAB-DV10-12.5M Mfr Part#: CAB-DV10-12.5M Mfr Name: CISCO SYSTEMS (CISCOPRO) Description: 12.5 meter flat grey Ethernet cable for Touch 10, 1, EA; LI 010: CTS-CAM-P60+ Mfr Part#: CTS-CAM-P60+ Mfr Name: CISCO SYSTEMS (CISCOPRO) Description: Cisco TelePresence Precision 60 Camera - auto expand onl, 1, EA; LI 011: Touch 10 auto expand Mfr Part#:CTS-CTRL-DVX-10+ Mfr Name: CISCO SYSTEMS (CISCOPRO) Description: Touch 10 auto expand, 1, EA; LI 012: Power Injector (802.3af) Mfr Part#: CTS-PWR-AIR-INJ5+ Mfr Name: CISCO SYSTEMS (CISCOPRO) Description: Power Injector (802.3af), 1, EA; LI 013: 4mtr flat grey Ethernet cable Touch 10 Mfr Part#: CAB-DV10-4M Mfr Name: CISCO SYSTEMS (CISCOPRO) Description: 4 meter flat grey Ethernet cable for Touch 10, 1, EA; LI 014: SW Image for SX80, MX700, MX800 Mfr Part#: SW-S52020-CE-K9 Mfr Name: CISCO SYSTEMS (CISCOPRO) Description: SW Image for SX80, MX700, MX800, 1, EA; LI 015: Interface plate CAM-P60 to Speaker Track Mfr Part#: CTS-ST-INT-PLATE Mfr Name: CISCO SYSTEMS (CISCOPRO) Description: Interface plate CAM-P60 to Speaker Track 60, 1, EA; LI 016: Two Ethernet cables (0.35m & 0.2m) for S Mfr Part#: CAB-ETH-ST-SHORT Mfr Name: CISCO SYSTEMS (CISCOPRO) Description: Two Ethernet cables (0.35m & 0.2m) for SpeakerTrack 60, 1, EA; LI 017: Cisco SX80 Codec Mfr Part#: CTS-SX80CODEC Mfr Name: CISCO SYSTEMS (CISCOPRO) Description: Cisco SX80 Codec, 1, EA; LI 018: Power supply 12VDC 84W Mfr Part#: PWR-12VDC-84W Mfr Name: CISCO SYSTEMS (CISCOPRO) Description: Power supply 12VDC 84W, 1, EA; LI 019: Speaker Track 60 Microphone Array Mfr Part#: CTS-ST-ARRAY60+ Mfr Name: CISCO SYSTEMS (CISCOPRO) Description: Speaker Track 60 Microphone Array, 1, EA; LI 020: SX80 rack ears - for auto expand only Mfr Part#: CTS-SX80-RACKEARS Mfr Name: CISCO SYSTEMS (CISCOPRO) Description: SX80 rack ears - for auto expand only, 1, EA; LI 021: Cisco TelePresence Precision 60 Camera Mfr Part#: CTS-CAM-P60 Mfr Name: CISCO SYSTEMS (CISCOPRO) Description: Cisco TelePresence Precision 60 Camera, 1, EA; LI 022: Bracket for mounting of Precision 60 Cam Mfr Part#: CTS-CAM60-BRKT Mfr Name: CISCO SYSTEMS (CISCOPRO) Description: Bracket for mounting of Precision 60 Camera, 1, EA; LI 023: Power Supply 12 VDC 40W Mfr Part#: PSU-12VDC-40W2 Mfr Name: CISCO SYSTEMS (CISCOPRO) Description: Power Supply 12 VDC 40W, 1, EA; LI 024: Installation sheet for Precision 60 Came Mfr Part#: DOC-P60CAM-BRKT Mfr Name: CISCO SYSTEMS (CISCOPRO) Description: Installation sheet for Precision 60 Camera bracke, 1, EA; LI 025: Pwr Cord US 1.8m Black YP-12 To YC-12 Mfr Part#: PWR-CORD-US-A Mfr Name: CISCO SYSTEMS (CISCOPRO) Description: Pwr Cord US 1.8m Black YP-12 To YC-1, 1, EA; LI 026: SX80 CODEC Spare Mfr Part#: CTS-SX80CODEC= Mfr Name: CISCO SYSTEMS (CISCOPRO) Description: SX80 CODEC Spare, 1, EA; LI 027: EXTENSION KIT FOR CISCO PRECISION 60 CAM Mfr Part#: RC5-P60-KS Mfr Name: SOUND CONTROL TECHNOLOGIES Description: EXTENSION KIT FOR CISCO PRECISION 60 CAMERA, INCLUDES CAM MOUNT, RACK SHELF, 1, EA; LI 028: Planar PS7050 70" commerical grade Mfr Part#: 997-7653-00 Mfr Name: PLANAR Description: Planar PS7050 70" commerical grade planar with advanced replacement, 1, EA; LI 029: Chief Fusion Wall Tilt XTM1U Wall Mount Mfr Part#: XTM1U Mfr Name: CHIEF MANUFACTURING Description: Chief Fusion Wall Tilt XTM1U Wall Mount for Flat Panel Display, 1, EA; LI 030: Touch Screen Mfr Part#: TSW-1052-B-S Mfr Name: CRESTRON Description: 10.1?Ÿ#??? º?Ÿ#??#?Ÿ#??# Touch Screen, 1, EA; LI 031: Control System Mfr Part#: PRO3 Mfr Name: CRESTRON Description: Control System, 1, EA; LI 032: Crestron 16x16 DM Chassis w/Redundant Po Mfr Part#: DM-MD16X16RPS Mfr Name: CRESTRON Description: Crestron 16x16 DM Chassis w/Redundant Power Supply, 1, EA; LI 033: Crestron Output Card Mfr Part#: DMC-4K-CO-HD-HDCP2 Mfr Name: CRESTRON Description: Crestron Output Card, 1, EA; LI 034: 2-Channel HDMI?Ÿ#???? Output Card for DM?Ÿ#?? Mfr Part#: DMC-HDO Mfr Name: CRESTRON Description: 2-Channel HDMI?Ÿ#???? Output Card for DM?Ÿ#???? Switchers, 1, EA; LI 035: Crestron DM8G+ INPUT CARD Mfr Part#: DMC-4K-C-HDCP2 Mfr Name: CRESTRON Description: Crestron DM8G+ INPUT CARD, 1, EA; LI 036: 4K HDMI Input Card Mfr Part#: DMC-4K-C-HDCP2 Mfr Name: CRESTRON Description: 4K HDMI Input Card, 1, EA; LI 037: DigitalMedia 8G+?Ÿ? º??#??? º Transmitter 201 Mfr Part#: DM-TX-201-C Mfr Name: CRESTRON Description: Digital Media 8G+?Ÿ? º??#??? º Transmitter 201, 1, EA; LI 038: DM 8G+ Recevier & Room Controller W/Scal Mfr Part#: DM-RMC-4K-SCALER-C Mfr Name: CRESTRON Description: DM 8G+ Receiver & Room Controller W/Scaler, 1, EA; LI 039: Crestron 16 Port POE private switch Mfr Part#: CEN-SWPOE-16 Mfr Name: CRESTRON Description: Crestron 16 Port POE private switch, 1, EA; LI 040: Crestron 16 Port POE private switch Mfr Part#: DM-PSU-8 Mfr Name: CRESTRON Description: PODM Power Supply, 1, EA; LI 041: Crestron DM8G+ Wire Mfr Part#: DM-CBL-8G-NP-500 Mfr Name: CRESTRON Description: Crestron DM8G+ Wire, 1, EA; LI 042: Crestron DM8G+ 100 Pack of Connections Mfr Part#: DM-CONN-WG-100 Mfr Name: CRESTRON Description: Crestron DM8G+ 100 Pack of Connections, 1, EA; LI 043: Crestron DM8G+ 100 Pack of Connections Mfr Part#: DM-CONN-WG-100 Mfr Name: CRESTRON Description: Crestron DM8G+ 100 Pack of Connections, 1, EA; LI 044: S.0045586.1.5_IT, 1, EA; LI 045: VTC EQUIPMENT, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Gordon intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Gordon is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. "Wherever the words ""offer"", ""proposal"", ""offerors"", or similar terms are used in this solicitation, they shall be read to mean ""quote"", ""quotation"", ""quoter"", ""vendor"" or similar corresponding term to reflect that this solicitation is a request for Quotations, not a Request for Proposals or an Invitation for Bids." The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. The following DFARS clauses are applicable under DFAS 252.212-7001: 252.225-7001, Buy American Act and Balance of Payments Program; 252.211-7003 ITEM IDENTIFICATION AND VALUATION (JUN 2005); 252.246-70000 Material Inspection and receiving Report and Army Electronic Invoicing Instructions; 252.204-7012 Safeguarding of Unclassified Controlled Technical Information This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Sellers must present their representations and certifications, upon request, through the Online Representations and Certifications Application (ORCA) at http:orca.bpn.gov. New equipment ONLY, NO remanufactured or used products. No "GREY" market items. Bid MUST be good till 30 September 2017 FOB Destination CONUS (CONtinental U.S.) No partial shipments unless otherwise specified at time of order In accordance with DFARS 252.232-7003, “Electronic Submission of Payment Requests and Receiving Reports ”, the contractor shall submit their payment request electronically using the Wide Area Workflow (WAWF). The WAWF website is located at https://wawf.eb.mil. There is no charge to use WAWF. Contractors must register to use WAWF at this website and ensure an electronic business point of contact (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract. Contractor training is available at the website Home Page, under “about WAWF ”. Contractors may contact the WAWF Customer Support for assistance toll free at 866-618-5988; commercial: 801-605-7095; Fax commercial: 801-605-7453 or CSCASSIG@CSD.DISA.MIL NAICS Code _____ must be present in vendor SAM account prior to contract award Notice to Prospective suppliers on Use of Past Performance Information Retrieval System.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/585e3f88dc3c159f51a88798a581f0bd)
- Place of Performance
- Address: FORT GORDON, GA 30905
- Zip Code: 30905-5030
- Zip Code: 30905-5030
- Record
- SN04577752-W 20170715/170713234758-585e3f88dc3c159f51a88798a581f0bd (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |