SOLICITATION NOTICE
66 -- plasma cleaner - RFQ
- Notice Date
- 7/17/2017
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- NASA Shared Services Center (NSSC), Building 1111, Jerry Hlass Road, Stennis Space Center, Mississippi, 39529, United States
- ZIP Code
- 39529
- Solicitation Number
- 80NSSC17Q0031-1
- Archive Date
- 8/4/2017
- Point of Contact
- Sean P. Hennessey, , Will C. Garrett,
- E-Mail Address
-
sean.p.hennessey@nasa.gov, will.c.garrett@nasa.gov
(sean.p.hennessey@nasa.gov, will.c.garrett@nasa.gov)
- Small Business Set-Aside
- N/A
- Description
- Solicitation No. 80NSSC17Q0031-1 STATEMENT OF WORK Plasma Cleaner 1.0 INTRODUCTION This statement of work (SOW) describes the requirements for a plasma cleaner, suitable for use as a scanning electron microscope (SEM) chamber cleaner and an external sample cleaner used prior to placing the sample in the SEM chamber. The plasma cleaner is to be provided to the Materials Evaluation Laboratory (MEL) at the NASA Johnson Space Center (JSC). 2.0 REQUIREMENTS The vendor shall provide a precision saw that meets all JSC technical requirements as listed below in section 2.1, TECHNICAL REQUIREMENTS. 2.1 TECHNICAL REQUIREMENTS 1. Base Unit Unit shall be interchangeable on a Hitachi S4800 and a Zeiss Supra 55VP without breaking vacuum on either SEM. 2. Power Output Capability for variable power output as requirements demand. 3. Gas Source Capability to use multiple gas sources plus atmospheric air. 4. Voltage The unit must be capable of operating on 110 v. Adapter can be included to reach this requirement. 5. Pump Any vacuum pump requirements shall be included. 6. Sample Cleaner The system will include a unit external to the SEM chamber for the sample cleaner. 3.0 DELIVERABLES 1 - Plasma cleaning unit 2 - External cleaning unit for samples 3 - Documentation including applicable safety and health documents as well as operations and maintenance manuals. 4 - Accessories (pump, cart, etc.) if not considered included in the base model. 3.1 CONTRACTOR TASKS 3.1.1. Safety Requirements The vendor shall provide a copy of applicable Safety and Health documents (hazardous materials lists) and a component listing of any pressurized lines, valves, or connections. 3.1.2. Documentation The vendor shall provide a copy of the operations manual, preventive maintenance manual, and applicable specifications and drawings for pressure systems. Electronic media provided on compact disk in common format, such as MS office or Adobe Acrobat Reader is acceptable. 3.1.3. Vendor Installation The vendor will not be required to install the unit. 3.2 WARRANTY The vendor shall provide a minimum of 1 year of on-site complete system warranty on parts and labors installed against defects in material and workmanship. 3.3 DELIVERY SCHEDULE All items must be delivered to JSC MEL no later than August 25, 2017.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/b609eefedf3e7eb12df453af92adab47)
- Place of Performance
- Address: Johnson Space Center, Johnson Space Center, Texas, 77058, United States
- Zip Code: 77058
- Zip Code: 77058
- Record
- SN04582423-W 20170719/170717235602-b609eefedf3e7eb12df453af92adab47 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |