Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF JULY 21, 2017 FBO #5719
DOCUMENT

38 -- VA242-17-Q-0398|Dynapac Roller CC1000 - Attachment

Notice Date

7/19/2017
 

Notice Type

Attachment
 

NAICS

333120 — Construction Machinery Manufacturing
 

Contracting Office

Department of Veterans Affairs;Network Contracting Office 2;James J. Peters VA Medical Center;130 West Kingsbridge Road;Bronx NY 10468-3904
 

ZIP Code

10468-3904
 

Solicitation Number

VA24217Q0398
 

Response Due

7/22/2017
 

Archive Date

8/21/2017
 

Point of Contact

Shari Lee
 

Small Business Set-Aside

Service-Disabled Veteran-Owned Small Business
 

Description

TITLE: 38-Notice of Combined Synopsis/Solicitation Notice SOL: VA242-17-Q-0398 -2 DUE: July 22, 2017, 8:00 AM EST (Saturday) SET ASIDE: Total Service-Disabled Veteran-Owned Small Business NAICS: 333120 (Construction Machinery Manufacturing) POP STATE: United States AGENCY: Department of Veterans Affairs VA Northport VA Hospital 79 Middleville Road, Northport, NY 11768 POC: Shari Lee; shari.lee@va.gov Mail all responses only to: Shari Lee at shari.lee@va.gov DESCRIPTION: NOTICE OF COMBINED SYNOPSIS/SOLICITATION NOTICE for the purchase of (1) Dynapac Roller 1000 CC. Within this Combined Synopsis/Solicitation Notice, the RFQ Solicitation documents exist and all RFQ submission, quotes and email inquiries will be accepted. Furthermore, a contract award will be made on the basis of proposals, or quotations received in response to this notice. The purpose of this Combined Synopsis/Solicitation Notice is a request for Proposals or Quotations of potential qualifications of Small Businesses Service Disabled Veteran-Owned firms relative to the North American Industry Classification Code (NAICS) 333120 (Construction Machinery Manufacturing). The Department of Veteran s Affairs NCO2 is seeking SDVOSB businesses to provide equipment with the following salient characteristics are needed: New Dynapac Double Drum Vibratory Roller 1000 CC PHYSICAL SPECIFICATIONS: 1) Must have the minimum of the following: (ENGINE) Manufacturer/Model ---Kubota D1105-E4B T4f (ENGINE) Type ---Water cooled diesel (ENGINE) Rated power, SAE J1995 ---24 hp @ 2,800 rpm (ENGINE) Fuel tank capacity ---6 gal (MASSES) Max. operating mass ---3,900 lbs. (MASSES) Operating mass (incl. ROPS) ---3,700 lbs (MASSES) Module mass (front/rear) ---1,700/2,000 lbs (PROPOLSION) Speed range ---0-6 mp/h (PROPOLSION) Vertical oscillation --- ±13 ° (PROPOLSION) Theor. Gradeability ---40 % (COMPACTION) Centrifugal force ---3,800 lb (COMPACTION) Nominal amplitude ---0.014 in (COMPACTION) Static linear load (front/rear) ---44/50 lbs/in (COMPACTION) Vibration frequency 4,200 vpm (COMPACTION) Water Tank 30 gal (HYDRAULIC SYSTEM) Driving Axial piston pump with variable displacement and servo. 2 radial piston motors with constant displacement. (HYDRAULIC SYSTEM) Vibration Gear pump/motors with constant displacement. (HYDRAULIC SYSTEM) Steering Gear pump with constant displacement. (HYDRAULIC SYSTEM) Service brake Hydrostatic in forward and reverse lever. (HYDRAULIC SYSTEM) Parking/Emergency brake Failsafe brake in both drums. DIMENSION OF PRODUCT: Wheelbase 53 inches Width 42 inches Curb clearance 18 inches Drum diameter 23 inches Height, w/o ROPS/cab 62 inches Ground Clearance 10 inches Length 80 inches Length (ROPS) 82 inches Overhang, right 1 inch Overhang, left 1 inch Turning radius, outside 108 inches Drum shell thickness 0.5 inch Drum width 39 inches Steering angle -- +34 ° Standard equipement: Auto Vibration Ctrl (AVC), Auto Water Ctrl (AWC), Back up alarm, Central lifting eye, Cup/Can holder, Emergency stop, Foldable ROPS, Fuel gauge, Horn, Hourmeter, Hydraulic pressure checkpoints, Ignition key, Interlock brake, Pressurized sprinkler system, Rubber mounted operator's platform, Seat belt, Sprinkler timer, Towing eyelet front/rear, Vibration both drums, Warning lights; Brake -Charging -Engine oil pressure/water temp -Low fuel CONSTRUCTION SPECIFICATION: Purchased components must meet two requirements. The component must be top of the line in quality and replacement parts must be locally available to the customer throughout the United States. WARRANTY: Prospective vendors shall be able to provide direct manufacturer support and shall directly issue a manufacturer's limited factor warranty of the government, Should cover (3) three years parts & Labor, excluding Batteries & Tires.. Vendor shall provide a cut sheet(s), schematic(s), diagram(s), or similar clearly indicating DynaPac Vibratory Roller or Equal. DELIVERY LOCATION: The delivery area is located: Department of Veterans Affairs Medical Center 79 Middleville Road Building 16; Northport, New York 11768 CODES: Vendor shall comply with accepted manufacturer process, as well as current Occupational Safety and Health Administration, Labor Department, and New York codes, laws and regulations as applicable to this statement of work. FINAL INSPECTION: All material delivered must meet specifications provided and will be inspected by Operations Supervisor. All submission for any quotes will be given to service POC approval/inclusion or exclusion based on salient characteristics. This Combined Synopsis/Solicitation Notice is open to all SDVOSB vendors who have an interest in this offer. They should furnish detailed data and quotes concerning their defined interest by June 22, 2017, by 8 AM EST(Saturday). The currently NAICS code for this notice is 333120 (Construction Machinery Manufacturing) and the size standard is 1,250 employees. All response email should contain the following information: Name of firm, Socio-Economic category of the firm (SDVOSB), complete address, complete email address and phone number of contact. The email that you send to Shari.Lee@va.gov must contain the words VA242-17-Q-0398 Dynapac Vibratory Roller Combined Synopsis/Solicitation in the subject box. **Note: All SDVOSB vendors who plan on competing for this stated acquisition must be VIP Verified at https://www.vip.vetbiz.gov/. To properly apply the VA Rule of Two 38 U.S.C. 8127 (d) Supplies and Services to procurements for SDVOSB set-asides, Contracting Officers are required to verify that all SDVOSBs who are interested parties are VIP Verified during entire acquisition process. Thank You**
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/VA/BroVANAP/VAMD/VA24217Q0398/listing.html)
 

Document(s)

Attachment
 

File Name: VA242-17-Q-0398 VA242-17-Q-0398_2.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3673297&FileName=VA242-17-Q-0398-005.docx)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3673297&FileName=VA242-17-Q-0398-005.docx

 

File Name: VA242-17-Q-0398 VA242-17-Q-0398_3.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3673298&FileName=VA242-17-Q-0398-006.docx)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3673298&FileName=VA242-17-Q-0398-006.docx

 

Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 

Record

SN04585612-W 20170721/170719234648-53852527f652193f55fd3b086bfbe724 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |