SOLICITATION NOTICE
58 -- Coax Couplers, Coax Directional Couplers, and Coax Variable Attenuator
- Notice Date
- 7/19/2017
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334515
— Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
- Contracting Office
- Department of the Navy, Naval Air Systems Command, Naval Air Warfare Center Aircraft Division Pax River, Building 441, 21983 Bundy Road Unit 7, Patuxent River, Maryland, 20670, United States
- ZIP Code
- 20670
- Solicitation Number
- 1300632504
- Archive Date
- 8/18/2017
- Point of Contact
- Shawn K. Harbaugh, , Sotanya Rushing,
- E-Mail Address
-
shawn.harbaugh@navy.mil, sotanya.rushing@navy.mil
(shawn.harbaugh@navy.mil, sotanya.rushing@navy.mil)
- Small Business Set-Aside
- N/A
- Description
- This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Naval Air Warfare Center - Aircraft Division (NAWC-AD) is requesting for quotation (RFQ) for the procurement of Calibration Standards (CALSTDs) ancillary equipment. The equipment supports Aviation Fleet Intermediation Calibration Activities, Fleet Training Activities, and Aviation Navy Calibration Laboratories (NCLs) to support Aviation Organizational and Intermediate level maintenance assets. The incorporated document, provisions and clauses are those in effect through the Federal Acquisition Circular (FAC) 2005 - 95. The associated North American Industrial Classification System (NAICS) code for this procurement is 334515, "Standards and Calibration Equipment for Electrical Measuring Manufacturing." The Product Service Code (PSC) for this procurement is 5999. This procurement is not a small business size standard. Under this effort, the Contractor shall provide the following items: Line Part Number Description Quantity 1 3000-40 Coax Directional Coupler 21 2 3000-30 Coax Directional Coupler 25 3 3002-10 Directional Coupler 10 4 3002-30 Directional Coupler 25 5 792FM Coax Variable Attenuator 15 Description of Requirements: •- The 3000-40 Coax Directional Coupler (1) frequency range 225-460 MHz. (2) 40db coupler. These units are required to replace broken units. Specifically these units will be used as calibration standards in Four (4) NAVAIR Instrument Calibration Procedures (ICP's) to calibrate RF wattmeter, power and RF communication test sets. •- The 3000-30 Coax Directional Couplers (1) frequency range 225-460 MHz. (2) 30db directivity. These units are required to fill vacant standards capability requirements for supporting the F-18 and AV8B Aircraft. Specifically these units will be used as calibration standards in Seven (7) NAVAIR Instrument Calibration Procedures (ICP's) to calibrate RF wattmeter, digital data simulators, power sensors, thermoelectric power heads and standing. •- The 3002-10 Direction Coupler (1) frequency range 1.0 to 2.0 GHz. (2) 10db coupler. These units are required to replace broken units and will be used as calibration standards in 19 NAVAIR Instrument Calibration Procedures (ICP's) to calibrate RF wattmeter, power, and RF communication test sets. •- The 3002-30 Directional Coupler (1) frequency range 1.0 to 2.0 GHz. (2) 30db coupler. These units are required to replace broken units and will be used as calibration standards in six (6) NAVAIR Instrument Calibration Procedures (ICP's) to calibrate RF wattmeter, power, and RF communication test sets. •- The 792FM Variable Coax Attenuators: (1) frequency ranges 2-12.4 GHz (2) coupler range 0-20 db. They will be used to fill vacant standards capability requirements for supporting the AV-8B Aircraft TAMS, E-6A Aircraft TAMS, F-14 Aircraft TAMS and P-3 Aircraft TAMS. Specifically these units will be used as calibration standards in Sixteen (16) NAVAIR Instrument Calibration Procedures (ICP's) to calibrate LOG/LIN RF Power meters, Signal Generators, Power Meters, Coaxial Hybrid junctions, Thermo-electric Power heads, Peak Power Meters, Radar test sets, Voltage standing Wave Ratio coaxial instruments, Altimeter Test Bench sets and Radar Test sets. All quotes must be for all items as stated, no substitutes will be accepted and partial quotes will not be considered. Only firm fixed price offers will be evaluated. An offer using a sliding price scale or subject to escalation based on any contingency will not be accepted. Award will be made to only one vendor. Place of Delivery: The items above must be delivered to the following address: COMMANDER, Naval Aviation Depot, FRC East, Bldg. 4533, Code 6.2.2, MCAS, Cherry Point, NC 28533, Attn: Christine Anderson. Inspection/Acceptance: Destination Additionally, the following delivery scheduled should be adhered to as well: •- P/N 3000-40: Qty. 1 to be delivered 4 weeks after award of contract, remaining Qty. 20 to be delivered 16 weeks after award of contract. •- P/N 3000-30: Qty. 6 to be delivered 4 weeks after award of contract, remaining Qty. 19 to be delivered 16 weeks after award of contract. •- P/N 3002-10: Qty. 10 to be delivered 4 weeks after award of contract. •- P/N 3002-30: Qty. 18 to be delivered 4 weeks after award of contract, remaining Qty. 7 to be delivered 16 weeks after award of contract. •- P/N 792FM: Qty. 15 to be delivered 14 weeks after award of contract. Applicable FAR Provisions & Clauses: •- FAR Clause 52.203-6, Restrictions on Subcontractor Sales to the Government. •- FAR Clause 52.204-7, Systems for Award Management. •- FAR Clause 52.204-13, System for Award Management Maintenance. •- FAR Provision 52.212-1, Instructions to Offerors - Commercial Items. •- FAR Provision 52.212-2, Evaluation - Commercial Items is hereby incorporated by reference. •- Offeror must include a completed copy of provision FAR 52.212-3, Offeror Representations and Certifications - Commercials Items with its offer. •- FAR Clause 52.212-4, Contract Terms and Conditions - Commercial Items. •- FAR Clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items, applies to this acquisition. The following additional FAR clauses, cited in this clause, are applicable to this acquisition: •o 52.222-3, Convict Labor. •o 52.222-19, Child Labor - Cooperation with Authorities and Remedies. •o 52.222-21, Prohibition of Segregated Facilities. •o 52.222-26, Equal Opportunity. •o 52.222-35, Equal Opportunity for Veterans. •o 52.222-36, Equal Opportunity for Workers with Disabilities. •o 52.222-37, Employment Reports on Veterans. •o 52.222-40, Notification of Employee Rights Under the National Labor Relations Act. •o 52.222-50, Combating Trafficking in Persons. •o 52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving. •o 52.225-1, Buy American - Supplies. •o 52.225-13, Restrictions on Certain Foreign Purchases. •- FAR Clause 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration. •- FAR Clause 52.247-34, F.O.B. Destination, applies to this acquisition. •- FAR Clause 52.252-2, Clauses Incorporated by Reference. •- DFARS Clause 252.211-7003, Item Unique Identification and Valuation. •- DFARS Clause 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. •- DFARS Clause 252.225-7000, Buy American Act - Balance of Payments Program Certificate. •- DFARS Clause 252.227-7015, Technical Data - Commercial Items. •- DFARS Clause 252.227-7037, Validation of Restrictive Markings on Technical Data. •- DFARS Clause 252.232-7003, Electronics Submission of Payment Requests and Receiving Reports. •- DFARS Clause 252.232-7006, Wide Area Workflow Payment Instructions. •- DFARS Clause 252.246-7000, Material Inspection and Receiving Report. •- NMCARS Clause 5252.201-9500, Technical Point of Contract (TPOC). This announcement constitutes the only solicitation; a written solicitation will not be issued. The Government will utilize lowest price technically acceptable as the source selection process. The award will be made on the basis of the lowest evaluated price and made without discussions. Interested parties may submit a capability statement. Offerors must ensure that their firm is registered with the System for Award Management (SAM). For further information, please refer to https://www.sam.gov. The Government will consider written and/or electronic media responses to this announcement received no later than 16:00 on August 3, 2017 and can be submitted to: Shawn Harbaugh NAWC-AD Contracts 2.5.1.6.13 22473 Millstone Rd., Bldg. 505 Patuxent River, MD 20670 shawn.harbaugh@navy.mil *This action is related to the RFQ (N00421-17-Q-0072) posted to FedBizOps.gov on 12 April 2017. *
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVAIR/N00421/1300632504/listing.html)
- Record
- SN04587114-W 20170721/170720000022-48192a5dd536f0a7a0048f454c177c09 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |