SOLICITATION NOTICE
34 -- Makino U6 Heat CNC Wire EDM Machine
- Notice Date
- 7/20/2017
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333517
— Machine Tool Manufacturing
- Contracting Office
- Department of Justice, Federal Bureau of Investigation, Procurement Section, 935 Pennsylvania Avenue, N.W., Washington, District of Columbia, 20535, United States
- ZIP Code
- 20535
- Solicitation Number
- DJF-17-2200-PR-0004898
- Archive Date
- 8/11/2017
- Point of Contact
- Tammy Terrell Miller, Phone: 703-632-4631
- E-Mail Address
-
tammy.miller@ic.fbi.gov
(tammy.miller@ic.fbi.gov)
- Small Business Set-Aside
- N/A
- Description
- Request for Quote DJF-17-2200-PR-0004898 This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulations, (FAR), Subpart 12.6, as supplemented with additional information included in this notice. This solicitation incorporates provisions and clauses that are in effect through Federal Acquisition Circular 2005-95, effective 01-19-2017. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. Interested parties are responsible for monitoring this site to ensure that they have the most up-to-date information about this acquisition. The Request for Quote, (RFQ), number is DJF-17-2200-PR-0004898 and shall be referenced on all quotes. This acquisition is a full and open competition. The NAICs Code is 333517, Machine Tool Manufacturing, and the Size Standard is 500 employees. This RFQ is Brand Name or Equal in accordance with FAR 11.104. Substitute brands may be provided if they meet the salient physical, functional, or performance characteristics specified by the Brand Name identified in this solicitation, including dimensions. If the offeror submits a quote for an equal product, specifications of the item(s) shall be included in the quote. Products equal to Brand Name shall be accompanied by certifiable references. Technical capability will be determined solely on the content and merit of the information submitted in response to this provision, therefore; it is incumbent upon the interest party to provide sufficient technical literature and documentation in order for the Government to make an adequate technical assessment of the proposal. The Federal Bureau of Investigation, (FBI), has a requirement for brand name or equal, Makino U6 HEAT CNC Wire EDM Machine. Space in the machine shop is limited; consequently, equal products may not exceed the available 43" x 35" floor space. Quantity Description 1 Makino U6 HEAT CNC Wire EDM Machine. 2 V Diamond Wire Guide.004 2 V Diamond Wire Guide.006 2 V Diamond Wire Guide.008 2 V Diamond Wire Guide.012 4 HBZ10220.010 Dia Hitachi Hard Brass Wire 22 lbs. 4 H341380/20 MANN FILTER, 13 Dia x 12, 35 micron Additional Falt Diamond Wire Guide High Taper Angle Guide Set.200 mm High Taper Angle Guide Set.250 mm CH400 Metric Grease Gun U Series Paper Manual Set Second Hyper I Display Screen Antivirus Function Application Training and Onsite Support MMK mdhwI100l Rotary Table Interface with MRJ4 Series Motor Fully Integrated into U6 MDHWi100Lxx Vertical/Horizontal Position Model without Scale Feedback Adapter for Erowa ER036345 Erowa ER036345 Chuck for MMK Rotary Table Shipping and Rigging MB935V Virgin Resin Recharge 1.1 CUFT Delivery of items shall be within 30 days After Receipt of Order, (ARO). The contractor shall extend to the Government full coverage of any standard commercial warranty normally offered in a similar commercial sale. Acceptance of the warranty does not waive the Governments rights under the Inspection Clause, nor does it limit the Governments rights with regard to the other terms and conditions of the contract. The warranty period shall begin upon final acceptance of all items provided to the government by the Contractor. In the event of a conflict the terms and conditions of the Governments contract shall take precedence over the warranty. FAR Clauses and Provisions applicable to this acquisition can be obtained from the website, http://www.acqent.gov. The following clauses and provisions are incorporated by reference and apply to this acquisition: FAR 52.212-1, Instructions to Offeror - Commercial Items (Jan 2017); 52.212-2 (Jan 1999), Evaluation - Commercial Items; offers shall be evaluated on a low cost, technically acceptable basis. 52.212-3, Offeror Representations and Certifications - Commercial Items (Mar 2003); 52.212-4, Contract Terms and Conditions - Commercial Items (Jan 2017); 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items (Jan 2017), applicable clauses under 52.212-5 include: a); b) 1; 4; 8; 14; 16; 19; 22; 25; 26; 27; 28; 29; 30; 31; 32; 33; 34; 44; 48; 51; 57. (d). (e). 52.211-6, Brand Name or Equal (Aug 1999); Small Business Accelerated Payment - The contractor must indicate its business size on each invoice to assist the payment office in determining eligibility for accelerated payment in accordance with OMB memo M-11-32, "Accelerating Payments to Small Businesses for Goods and Services," dated 10/14/2011. The Prompt Payment Act still applies to this action; however, the agency will make best efforts to pay proper invoices within 15 days. FBI-ISI Invoice Submission Instructions - (Apr 2016). The invoice should be attached to an email, and sent to the following address: central_invoices@ic.fbi.gov. It is imperative that the invoice contains current and accurate contract information (contract/order number), otherwise it risks being rejected. Upon receipt of the invoice, a confirmation email will be sent back to the sending email address. At this point, the invoice is considered received, and will begin processing through the FBI's internal payment systems. Please note, invoices received before 5 pm EST (Monday-Friday) will be considered "received" that business day. Any invoices received after 5 pm will be considered "received" and will be entered into the invoices system on the following business day. Addendum to 52.212-1, Modify (b) Submission from Offers, to read as follows: Quotations shall be submitted via email to the attention of Tammy T. Miller at ttmiller@fbi.gov, no later than Thursday, July 27, 2017 at 10:00 am, EDT. Quotes shall be clearly marked RFQ DJF-17-2200-PR-0003995. Questions shall be submitted via email to the attention of Tammy T. Miller at ttmiller@fbi.gov, no later than Tuesday, July 25, 2017 at 10:00 am, EDT. Offerors are hereby notified that if their quote is not received by the date, time and location specified in this announcement, it will not be considered. All responsible sources may submit a quotation which shall be considered by the agency.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOJ/FBI/PPMS1/DJF-17-2200-PR-0004898/listing.html)
- Place of Performance
- Address: FBI Academy, Quantico, Virginia, 22048, United States
- Zip Code: 22048
- Zip Code: 22048
- Record
- SN04588295-W 20170722/170720235123-e220110ea0352b853376cd24b9d7fab8 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |