SOLICITATION NOTICE
35 -- Welding Machine
- Notice Date
- 7/21/2017
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333992
— Welding and Soldering Equipment Manufacturing
- Contracting Office
- Department of the Army, National Guard Bureau, USPFO for Mississippi, 144 Military Drive, JACKSON, Mississippi, 39208-8860
- ZIP Code
- 39208-8860
- Solicitation Number
- W9127Q-17-T-0038
- Archive Date
- 8/10/2017
- Point of Contact
- Robert Mayhue, Phone: 6013131700
- E-Mail Address
-
robert.w.mayhue2.mil@mail.mil
(robert.w.mayhue2.mil@mail.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- MSARNG TASMG has a requirement for a welding machine. Evaluations shall be lowest price technically acceptable. Welding machine MUST MEET OR EXCEED the following requirements: REQUIREMENT 1 -WELDING MACHINE The 1108 th TASMG is in need of this machine for Aluminum Mig Welding, GMAW (Gas Metal Arc Welding); this process is utilized when repairing aircrafts. SPECIFICATIONS •- 1- or- 3- phase input power: •o With line voltage compensation •- Synergic Pulse: •o Utilizes single-knob control •o The machine must select the correct pulse power based on the wire feed speed (WFS) set by the operator •- Trigger Schedule Select: •o Must allow the operator to select the alternative schedule by quickly tapping the gun trigger when not welding •- Jog and Purge Feature: •o Jog and purge must allow operator to jog the wire, or purge gas lines and preset gas pressure at the regulator before welding •- Electronic Wire Spool Brake: •o Electronic Wire Spool must allow the wire spool to free spool while welding •o Must provide optimum wire feed delivery. •o Brake engage •§ on gun trigger release •- Synergic MIG and One- Knob Control: •o Synergic MIG must provide communication between power source, feeder and gun •o Synergic one-knob control must allow operator to set the wire feed speed control on the gun •- Trigger Hold: •o Must allow the operator to release the trigger while making - long continuous welds •- Fan-On-Demand: •o Cooling must operate as needed •o Must reduce power consumption •o Must reduce contaminants inside the unit •- Machine Specifications •o Input Power •§ requires 1-or2- Phase Power •o Rated Output •§ 300 AMPS at 32 VDC •§ 60% duty cycle •§ 60HZ •§ 1-or-3- Phase •o Welding Amperage Range •§ 25- 400 Amps •o Wire Speed •§ 50- 800 IPM (1.3-20 m/min.) •o Weight •§ Range 170-185 lb. •o Wire Diameter Capacity •§ Aluminum •·.035-in. •·.040-in. •·.047-in. •o Max Spool Size Capacity •§ 12 in •- Weld Current Capacity: •o Air- 300 A at 100% Duty Cycle •o Water- 400 A at 100% Duty Cycle •- Electrode Wire Dia Capacity: •o.030 - 1/16 in. aluminum wire •- Wire Speed: •o 70 - 900 IPM •- Max Spool Size Capacity on XR- control: •o 12 in (305 mm) MACHINE MUST INCLUDE: •- Pulsed MIG Welding Power Source: •o 25 ft. Push-Pull Gun •§ Air- cooled •o Industrial power cord (without plug) for single- or three-phase •o Work cable with clamp •o Gas Solenoid •§ Factory- installed •o Argon mix regulator/flow meter •o Low-mounted running gear /cylinder rack •o Factory- installed •o Drive rolls and contact tips •§.035 &.047 for Gun
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/NGB/DAHA22/W9127Q-17-T-0038/listing.html)
- Place of Performance
- Address: 4715 Hewes Avenue, Hangar 1, 1108th TASMG, Gulfport, Mississippi, 39507, United States
- Zip Code: 39507
- Zip Code: 39507
- Record
- SN04589877-W 20170723/170721234815-b8ca711cc80f9ff6ac4c153e827e618b (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |