SOLICITATION NOTICE
70 -- MICROFILM SCANNER & SOFTWARE
- Notice Date
- 8/8/2017
- Notice Type
- Presolicitation
- Contracting Office
- 1000 Custer Hollow Road, Clarksburg, WV 26306
- ZIP Code
- 26306
- Solicitation Number
- DJF-17-0100-PR-0002937_01
- Response Due
- 8/17/2017
- Archive Date
- 2/13/2018
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- Bids are being solicited under solicitation number DJF-17-0100-PR-0002937_01. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation is issued as an invitation for bids (IFB), unless otherwise indicated herein. If your company can provide the product/services listed on the solicitation and comply with all of the solicitation instructions, please respond to this notice. To view the specifications, please go to www.FedBid.com and reference Buy No. 877164. GSA Schedule Bids Only: Sellers bidding on this opportunity MUST have the items requested on an existing GSA Schedule. The Schedule must either be in the Seller's name or the Seller must be able to document its ability to act as an agent of a partner's Schedule. Sellers must not bid more than their applicable contract ceiling price, excluding the FedBid Fee, for contract-specific items. If FedBid receives notice that, due to inclusion of the FedBid Fee, the Selected Bid's line item pricing is higher than the Selected Seller's applicable published government contract pricing, the FedBid Fee will be reduced to ensure the Selected Bid's line item pricing does not exceed the Selected Seller's applicable contract pricing. Sellers may offer Open Market items only in accordance with the approved Terms and Conditions of their respective GSA Schedule AND upon approval from the soliciting Contracting Officer. Information regarding GSA Schedules can be found at www.GSA.gov. This requirement is a [ Small Business ] set-aside and only qualified sellers may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2017-08-17 12:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Clarksburg, WV 26306 The Federal Bureau of Investigation requires the following items, Meet or Exceed, to the following: LI 001: Microfilm Scanner and software to scan approximately 71,000 rolls of microfilm Requirements: Scanner must be connected to CJIS/FBI network and therefore cannot contain an embedded operating system -high optical resolution capabilities of 300-750 dpi true optical resolution -clear scanning of small fonts and highly-reduced images -records are to be searchable, retrievable, and printable with record output of.pdf -film sizes to include 16mm and 35mm -film formats to include simplex/duplex, positive/negative, blipped/unblipped, & mixed -accepts up to 1000ft rolls of film -100% image capture end-to-end -compatible with Windows 10 -works 24/7 with minimal maintenance requirements -software to enhance the output and quality control of the scanned roll with connectivity capabilities for additional PC's to perform quality control -1 yr. maintenance/support -1 software licence with scanning -minimum of 5 quality control/auditor software licences Authorized resellers only, must provide proof of authorization, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, Federal Bureau of Investigation intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Federal Bureau of Investigation is taking this action in an effort to improve both seller access and awareness of requests and the agency's ability to gather multiple, completed, real-time bids. All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Sellers that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Sellers that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Sellers may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should Sellers require additional clarification, contact FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. Bid MUST be good for 60 calendar days after close of Buy. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. ALL REGISTRATION MUST BE "ACTIVE" AT TIME OF AWARD. NO EXCEPTIONS WILL BE MADE. No partial shipments are permitted unless specifically authorized at the time of award. Delivery must be made within 30 days or less after receipt of order (ARO). The offer must provide within its offer the number of days - not to exceed 30 - required to make delivery after it receives a purchase order from the buyer. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. Sellers understand that FedBid ranks all Bids by price; however, pursuant to applicable acquisition regulations and/or departmental guidelines, Buyers may use criteria other than price to evaluate offers. Accordingly, please note that, unless otherwise specified in the Buy Terms, below, to the extent required by applicable regulations and/or guidelines, award will be made to the responsible Seller whose offer conforming to the solicitation will be most advantageous to the Buyer on the basis of price, technical capability, delivery, and past performance. BRAND NAME OR EQUAL FAR 52.211-6 Aug. 1999 (a) If an item in this solicitation is identified as "brand name or equal", the purchase description reflects the characteristics and level of quality that will satisfy the Government s needs. The salient physical, functional, or performance characteristics that "equal" products must meet are specified in the solicitation. (b) To be considered for award, offers of "equal" products, including "equal" products of the brand name manufacturer, must: (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications. (c) The Contracting Officer will evaluate "equal" products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an equal product, the offeror shall provide the brand name product referenced in the solicitation. NO SUBSTITUTIONS, EXACT MATCH ONLY. The vendor may not substitute any item/service listed on this order without prior written approval from the Contracting Officer. No other individual is authorized, either verbally or in writing to change part numbers, manufacturer, quantity, delivery dates, or any other specifications of this IFB. Items/services that do not conform to descriptions and part numbers found in this IFB will be rejected at the time of delivery causing a return at the vendor's expense. In addition to providing pricing at www.FedBid.com for this solicitation, each Offer must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation. Submissions can be sent to clientservices@fedbid.com. To be considered for award, all Sellers must be manufacturer/ Federally authorized distributors of the equipment/services they are offering with a demonstrated capability of delivering the entire order within the time frames specified by the Buyer on the award. Sellers may be required to provide documentation as proof of authorization to be considered for award. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOJ/FBI/FedBid/DJF-17-0100-PR-0002937_01/listing.html)
- Place of Performance
- Address: Clarksburg, WV 26306
- Zip Code: 26306
- Zip Code: 26306
- Record
- SN04618181-W 20170810/170808232733-ee51d58ba3b9169022e3c55a38e6bf55 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |