MODIFICATION
84 -- CRT Course - Tactical Equipment
- Notice Date
- 8/9/2017
- Notice Type
- Modification/Amendment
- Contracting Office
- 2230 Gallows Rd, Dunn Loring, VA 22027
- ZIP Code
- 22027
- Solicitation Number
- FY17RR046
- Response Due
- 8/9/2017
- Archive Date
- 2/5/2018
- Point of Contact
- Name: Ronald Rokosz, Title: Logistics Coordinator, Phone: 5712269623, Fax:
- E-Mail Address
-
rokoszrj@state.gov;
- Small Business Set-Aside
- Total Small Business
- Description
- AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is FY17RR046 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-95. The associated North American Industrial Classification System (NAICS) code for this procurement is 316998 with a small business size standard of 500.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2017-08-09 13:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Winchester, VA 22601 The Department of State requires the following items, Brand Name or Equal, to the following: LI 001: Tacprogear Scout - Special Operations High Cut Helmet, TAN The SCOUT IIIA ballistic helmet is a lightweight, multi-impact helmet. The SCOUT Ballistic Helmet offers optional Team Wendy Padding and Retention Systems. The SCOUT also includes a proprietary 4 Position Accessory Rail and Shroud System with many attachment points, and the donning and doffing of head borne accessories. Each helmet comes with Velcro kit included. Features: Lightweight Design Lower dovetail accessory rail for mounting communication headsets, battery pack, and other accessories Top and side strips of loop for attaching hook sided devices like illuminators, strobe lights, and/or battery packs Front mount for night vision, cameras, or other optic devices Must include Team Wendy Retention System Standard 7 pad system included (optional padding systems available) Coated with an epoxy primer and a Mil-Spec chemical agent resistant coating (CARC) Level IIIA, 108, EA; LI 002: TITANIUM/STEEL MULTI-HIT HARD ARMOR RIFLE PLATES STAND ALONE 10"x 12" NIJ Standard Threat Level III or custom AK-47 Shooters Cut Multi-hit capability Defeats 7.62 mm NATO 148 gr. (.308 caliber) FMJ at 2780 fps (level III), 192, EA; LI 003: Heavy Duty Rigger's Duty Belt, TAN, Confirm Sizes Needed, 114, EA; LI 004: Duty Belt, Ballistic Nylon, Duty, Belt, Ballistic Nylon - Cordura Ballistic Duty Belt features a triple-release retention buckle for the ultimate in security, plus padded edges for the ultimate in comfort. BlackHawk's ergonomically designed Duty Belt also comes with a nylon loop backing that mates perfectly to Blackhawk Cordura Ballistic Trouser Belt., 114, EA; LI 005: Model 6005 SLS Tactical Holster with Quick-Release Leg StrapHolster, Tactical, Kydex Coyote Plastic Hoster - thigh mount rigging with adaptability for light mounted on Glock 17 handgun - must accommodate the Glock Model 17 handgun with light mounted flashlight. See Streamlight TLR1(below) for light attachment. This holster must accomodate the Streamlight Model light as described below. Safari Land PART: 6005-8321-551 tactical drop leg holster (Right Handed), 96, EA; LI 006: Model 6005 SLS Tactical Holster with Quick-Release Leg StrapHolster, Tactical, Kydex Coyote Plastic Hoster - thigh mount rigging with adaptability for light mounted on Glock 17 handgun - must accommodate the Glock Model 17 handgun with light mounted flashlight. See Streamlight TLR1(below) for light attachment. This holster must accomodate the Streamlight Model light as described below. Safari Land PART: 6005-8321-552 (Left Handed)., 12, EA; LI 007: Flex Cuffs, Monadock DC/T 1/2" wide Double Loop Cuff, Double Loop configuration made of molded plastic -white in color., 192, EA; LI 008: Combat Tourniquet One-Handed Combat Application Tourniquet (CAT), Tactical black. Durable windless system with free-moving internal band. Package size: 6.5"Lx2.4"Wx1.5"D. Weight 2.7 oz., 192, EA; LI 009: Flashlight, Mini w/Pouch "AA" Batteries, Streamlight Protac 1AA Professional Tactical Flashlight - C4- LED Illumination Output -Run Time High - 50 lumens/Low-6 lumens- Strobe -4 hours/Rubber Push Button Tail -Waterproof/Unbreakable Clip/ Carrying Case made of heave duty nylon with velcro belt clip, 96, EA; LI 010: Tac Med Kit, Individual Officer Trauma Kit (IOTK). Fully Stocked First Aid Kit, Coyote Tan. Closed dimensions: 8"hx6"wx3.5"d. Contents include emergency bandage -6", QUICK Clot Z-Fold LE Combat gauze, Chest Seal, Trauma Shears, Nitrile Gloves, 96, KT; LI 011: Camelbak Hydration System Cleaning Kit, 96, KT; LI 012: Streamlight TLR1, Weapon Light. Any substitution will not be considered unless vendor proves the light is compatible with the holster in line items 006,007., 192, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, Department of State intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Department of State is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. If this is a Brand Name Only procurement, Seller certifies that it is an authorized distributer of the brand name product being sold to the Department of State and that it has the certification/specialization level required by the manufacturer, to support both the product sale and product pricing, in accordance with applicable manufacturer certification/specialization requirements. Unless otherwise specified, Seller warrants that the products are new and in their original box(es). In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation. Submissions can be sent to clientservices@fedbid.com. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to FAR 4.1102 and other applicable regulations and guidelines. Information can be found at www.sam.gov All Bids must be valid for 30 days from the closing date for this solicitation. No exceptions or qualifications. New equipment ONLY, NO grey market or refurbished products. Items must be in original packaging, never used, and not altered in any way. Components of the requested equipment, to include memory, must be manufacturer-approved and may not be compatible, remanufactured, or refurbished equipment. All items must be covered by manufacturer s warranty and procured through a manufacturer approved distribution channel. Sellers must be able to document their ability to provide items through manufacturer approved distribution channels upon request. The Seller confirms to have sourced all products submitted in this Bid from manufacturer-approved channels for Federal sales, in accordance with all applicable laws and manufacturer s current applicable policies at the time of purchase. Seller must be able to support both the product sale and product pricing, in accordance with applicable manufacturer certification / specialization requirements. If software is provided or included, Seller shall, upon request, provide Buyer with a copy of the End User License Agreement. Seller certifies that all software is licensed originally to Buyer as the original licensee authorized to use the software. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. (a) The provider of information technology shall certify applications are fully functional and operate correctly as intended on systems using the Federal Desktop Core Configuration (FDCC). This includes Internet Explorer 7 configured to operate on Windows XP and Vista (in Protected Mode on Vista). For the Windows XP settings, see http://csrc.nist.gov/itsec/guidance_WinXP.html and for the Windows Vista settings, see: http://csrc.nist.gov/itsec/guidance_vista.html. (b) The standard installation, operation, maintenance, update, and/or patching of software shall not alter the configuration settings from the approved FDCC configuration. The information technology should also use the Windows Installer Service for installation to the default program files directory and should be able to silently install and uninstall. (c) Applications designed for normal end users shall run in the standard user context without elevated system administration privileges. (d) The Department of State currently intends to use Vista in Protected Mode in the future when all devices at all worldwide locations have sufficient capacity to permit an upgrade from the XP operating system. Pursuant to the Trade Agreements Act (19 U.S.C. 2512(a)) (TAA), Federal acquisitions of supplies may be made only from offerors that will supply products of an eligible country under any of the free trade agreements entered into pursuant to the TAA. An article is considered a product of a country only if it is wholly a product of that country or if it has been substantially transformed in that country into a new and different article of commerce with a name, character, or use distinct from that of the original article(s). Note that any item that is a discreet article as it is sold in commerce, regardless of its ultimate function or use, cannot be considered substantially transformed based solely on its integration into IT or other systems. The Contractor and its employees shall exercise the utmost discretion in regard to all matters relating to their duties and functions. They shall not communicate to any person any information known to them by reason of their performance of services under this contract which has not been made public, except in the necessary performance of their duties or upon written authorization of the Contracting Officer. All documents and records (including photographs) generated during the performance of work under this contract shall be for the sole use and become the exclusive property of the U.S Government. Furthermore, no article, book, pamphlet, email, recording, broadcast, speech television appearance, film or photograph concerning any aspect of work performed under this contract shall be published or disseminated through any media without the prior written authorization of the Contracting Officer. These obligations do no cease upon the expiration or termination of this contract. The Contractor shall include the substance of this provision in all contracts of employment and in all subcontracts hereunder. All bid prices must include shipping FOB Destination CONUS (CONtinental U.S.). No partial shipments are permitted, unless otherwise specified by Contracting Officer at time of award. TO HAVE A BID CONSIDERED FOR AWARD FOR BRAND NAME OR EQUAL & MEET OR EXCEED BUYS, ALL VENDORS MUST PROVIDE MANUFACTURER, PART # AND EXTENDED SPECIFICATIONS OF THE EXACT MODEL BEING PROPOSED FOR ALL LINE ITEMS. NO EXCEPTIONS. FAILURE TO PROVIDE THIS INFORMATION WILL RESULT IN A 'NON RESPONSIVE' BID AND REMOVAL FROM AWARD CONSIDERATION. The Government intends to make award to the responsive offeror that provides the Best Value to the Government based on Technical Acceptability, Price, Delivery Timeframe and Past Performance. Award will be made to the offeror quoting fair and reasonable prices who meet ALL required technical specifications and who comply with ALL solicitation requirements. Award may NOT be based solely on pricing factors alone. Consideration may be given to non-price related factors to include delivery, history, urgency of need, as well as price, among others. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Technical Compliance with Solicitation ________________________________________________ Delivery and Warranty Information ________________________________________________ Past Performance ________________________________________________ Price _______________ Technical and past performance, when combined, are more important than price. The Government may increase the quantity of supplies called for in the Schedule at the unit price specified. The Contracting Officer may exercise the option by written notice to the Contractor within 90 Calendar Days of receiving final delivery. Delivery of the added items shall continue at the same rate as the like items called for under the contract, unless the parties otherwise agree. Delivery must be made within 60 days or less after receipt of order (ARO). The offeror must provide within its offer the number of days - not to exceed 60 - required to make delivery after it receives a purchase order from the buyer.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/State/A-LM-AQM/A-LM-AQM/FY17RR046/listing.html)
- Place of Performance
- Address: Winchester, VA 22601
- Zip Code: 22601
- Zip Code: 22601
- Record
- SN04621536-W 20170811/170809233446-3e5b995b6c06a1fbe7af686ab9784ec5 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |