Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF AUGUST 24, 2017 FBO #5753
DOCUMENT

65 -- SURGICAL INSTRUMENTS - Attachment

Notice Date

8/22/2017
 

Notice Type

Attachment
 

NAICS

339112 — Surgical and Medical Instrument Manufacturing
 

Contracting Office

Department of Veterans Affairs;Network Contracting Office (NCO) 10;6150 Oak Tree Blvd., Suite 300;Independence OH 44131
 

ZIP Code

44131
 

Solicitation Number

VA25017Q1083
 

Response Due

8/22/2017
 

Archive Date

11/20/2017
 

Point of Contact

Rachelle J. Hamer
 

E-Mail Address

Contracting Officer
(rachelle.hamer@va.gov)
 

Small Business Set-Aside

N/A
 

Description

Combined Synopsis Solicitation: Surgical Instrument 1. General: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.6 as supplemented with additional information included in this notice. This notice constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. The solicitation number is VA250-17-Q-1083 and is issued as a Request for Quote (RFQ). This solicitation document and incorporates provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-94,2005-95, effective January 19, 2017. This procurement is set-aside 100% for Service-Disabled Veteran Owned Small Businesses (SDVOSB) and only qualified Offerors may submit bids. This requirement will be awarded on all-or-none basis. The applicable North American Industry Classification System Code (NAICS) is 339112 and the small business size standard is 1,000 employees. OFFERORS MUST STATE THEIR BUSINESS SIZE when submitting their offer AND if the item is on a FSS/GSA schedule awarded to the Offeror include the schedule information on your offer. Set-Aside Requirement: Only verified SDVOSB firms are eligible to submit an offer or receive an award of a VA contract that is set-aside for SDVOSBs or VOSBs in accordance with VAAR Part 819. A non-verified vendor that submits a bid or proposal should be rejected as non-responsive or technically unacceptable as listing in VIP is not self-correctable as a minor informality as, for example, a listing in SAM. All other purported SDVOSBs and VOSBs must apply for and receive verified status in accordance with 38 CFR Part 74 and be listed in VIP prior to submitting a bid or offer on an acquisition conducted in accordance with VAAR Part 819. The VIP database will be checked both upon receipt of an offer and prior to award. New Equipment ONLY; NO remanufactured/recovered material/reconditioned or "GRAY MARKET" items. All items must be covered by the manufacturer's warranty. No telephone requests for information will be accepted. Only emailed requests received directly from the Offeror are acceptable. It is the Offeror responsibility to ensure the quote is received. Quote must be good for 30 calendar days after close of this Combined Synopsis Solicitation. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. 2. Line items: MANUFACTURER: Novo BRAND NAME OR EQUAL ITEM NUMBER DESCRIPTION OF SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0001 KNIFE HANDLE, #3 STOCK NUMBER: 0127-03 4.00 EA 0002 KNIFE HANDLE, BEAVER #3, ROUND 4IN. STOCK NUMBER: 0128-50 2.00 EA 0003 FORCEPS, ADSON, BROWN 4-3/4IN. MANUFACTURER PART NUMBER (MPN): 130260 STOCK NUMBER: 0625-15 2.00 EA 0004 FORCEPS,EAR,LUCASE,5-1/2IN. STOCK NUMBER: 0730-14 2.00 EA 0005 FORCEPS, MOSQUITO, CVD, 5IN. STOCK NUMBER: 1545-12 8.00 EA 0006 FORCEPS, RANKIN, CVD, 6 1/4 IN. STOCK NUMBER: 1571-16 2.00 EA 0007 WEL CLAMP, NON PERFORATING 4IN. STOCK NUMBER: 1757-79 8.00 EA 0008 RETRACTOR, SENN, BLUNT 6-1/4IN. STOCK NUMBER: 2005-09 4.00 EA 0009 SCISSORS, JAMISON,CVD,7IN., SUPERCUT STOCK NUMBER: 20467-18 2.00 EA 0010 SKIN HOOK, DOUBLE PRONG, JOSEPH, 5 MM STOCK NUMBER: 2050-05 2.00 EA 0011 RETRACTOR, ARMY/NAVY,8-1/4IN. STOCK NUMBER: 2218-21 2.00 EA 0012 RETRATOR, WEITLANDER, SCHUKNECHT, SHARP STOCK NUMBER: 2426-20 2.00 EA 0013 ELEVATOR,FREER 7-3/4IN. STOCK NUMBER: 2635-03 2.00 EA 0014 NEEDLE HOLDER, HALSEY, SERRATED, 5 MANUFACTURER PART NUMBER (MPN): 121121 STOCK NUMBER: 3241-00 2.00 EA 0015 FORCEPS, ADSON, 4 3/4IN, TUNGSTEN STOCK NUMBER: 3250-00 2.00 EA 0016 SCISSORS, IRIS, CVD 4.5IN.,TUNGSTEN STOCK NUMBER: 3270-50 2.00 EA 0017 SCISSORS, IRIS,ST4.5IN., TUNGSTEN STOCK NUMBER: 3270-60 2.00 EA 0018 SCISSORS MAYO, ST., 6 3/4IN, TUNGSTEN STOCK NUMBER: 3283-00 2.00 EA 0019 FORCEPS, ALLIS, 6IN. STOCK NUMBER: 5002-15 4.00 EA 0020 SCISSORS, SPRING HANDLE, CVD 19 MM STOCK NUMBER: 5580-86 2.00 EA 0021 SCISSORS, SPRING HANDLE, CVD 19 MM STOCK NUMBER: 5580-87 2.00 EA 0022 FORCEPS, CRIMPER, MCGEE 3.5 MM STOCK NUMBER: 6101-24 2.00 EA 0023 FORCEPS, ALLIGATOR, BELLUCCI, ST. DELICATE 8.0 MM STOCK NUMBER: 6101-32 2.00 EA 0024 FORCEPS, ALLIGATOR, ST. VERY FINE 4.0 MM STOCK NUMBER: 6101-47 2.00 EA 0025 FORCEPS, ALLIGATOR, ST. VERY FINE 4.0 MM STOCK NUMBER: 6101-47 2.00 EA 0026 FORCEPS, CUP, OBLONG, FINE 2.0 MM STOCK NUMBER: 6101-50 2.00 EA 0027 FORCEPS, CUP, DELICATE,.75 MM STOCK NUMBER: 6101-52 2.00 EA 0028 FORCEPS, NIPPER, HOUSE-DIETERS 2MM STOCK NUMBER: 6101-57 2.00 EA 0029 FORCEPS, NIPPER. HOUSE-DIETERS 1.7 MM MANUFACTURER PART NUMBER (MPN): 3721046 STOCK NUMBER: 6101-58 2.00 EA 0030 ELEVATOR, DUCKBILL CVD 2MM MANUFACTURER PART NUMBER (MPN): 3724283 STOCK NUMBER: 6103-01 2.00 EA 0031 PICK, NEEDLE, AUSTIN SLIGHT CVD. MANUFACTURER PART NUMBER (MPN): 3722003 STOCK NUMBER: 6103-05 2.00 EA 0032 PICK, NEEDLE, AUSTIN, SHARP, 90 DEG. MANUFACTURER PART NUMBER (MPN): 3722006 STOCK NUMBER: 6103-08 2.00 EA 0033 DISSECTOR, AUSTIN STOCK NUMBER: 6103-09 2.00 EA 0034 CALIPER, STRUT, AUSTIN 3.5-5.0 MM STOCK NUMBER: 6103-10 2.00 EA 0035 KNIFE, SICKLE, AUSTIN, CVD, 3.0 MM STOCK NUMBER: 6103-12 2.00 EA 0036 ELEVATOR, DRUM, GUILFORD-WRIGHT, 15 DEG STOCK NUMBER: 6103-23 2.00 EA 0037 KNIFE, WHIRLYBIRD, HOUGH, STRONG CVD RT. STOCK NUMBER: 6103-44 2.00 EA 0038 KNIFE, WHIRLYBIRD, HOUGH, STRONG CVD LT. STOCK NUMBER: 6103-45 2.00 EA 0039 KNIFE, WHIRLYBIRD, HOUGH, LIGHT CVD, RT. STOCK NUMBER: 6103-46 2.00 EA 0040 KNIFE, WHIRLYBIRD, HOUGH, LIGHT CVD, LT STOCK NUMBER: 6103-47 2.00 EA 0041 PICK, NEEDLE, HOUGH, ST. SHARP STOCK NUMBER: 6103-49 2.00 EA 0042 PICK, NEEDLE, HOUSE, LIGHT CVD STOCK NUMBER: 6103-59 2.00 EA 0043 PICK, OVAL WINDOW, HOUSE, 90 DEG STOCK NUMBER: 6103-73 2.00 EA 0044 ELEVATOR, GIMMICK, 15 DEG STOCK NUMBER: 6103-76 2.00 EA 0045 KNIFE, LANCET, HOUSE 45 DEG. STOCK NUMBER: 6103-77 2.00 EA 0046 KNIFE, CURETTE, HOUSE-SHEEHY, 2 MM STOCK NUMBER: 6103-81 2.00 EA 0047 KNIFE, CURETTE, HOUSE-SHEEHY, 2.5 MM MANUFACTURER PART NUMBER (MPN): 6103-82 STOCK NUMBER: 6103-82 2.00 EA 0048 PICK,OVAL WINDOW MANUFACTURER PART NUMBER (MPN): 6103-83 STOCK NUMBER: 6103-83 2.00 EA 0049 PICK, OVAL WINDOW, HOUSE 30 DEG MANUFACTURER PART NUMBER (MPN): 6103-84 STOCK NUMBER: 6103-84 2.00 EA 0050 PICK, OVAL WINDOW, HOUSE, 90 DEG MANUFACTURER PART NUMBER (MPN): 3722061 STOCK NUMBER: 3722061 2.00 EA 0051 KNIFE, JOINT, INCUDOSTAPEDIAL, HOUSE, 20 DEG MANUFACTURER PART NUMBER (MPN): 6103-96 STOCK NUMBER: 6103-96 2.00 EA 0052 KNIFE, ROLLER, 15 DEG, 3 MM MANUFACTURER PART NUMBER (MPN): 6104-70 STOCK NUMBER: 6104-70 2.00 EA 0053 CLAMP, OSSICLE, DERLACKI MANUFACTURER PART NUMBER (MPN): 6105-11 STOCK NUMBER: 6105-11 2.00 EA 0054 ELEVATOR,LEMPERT 7.25IN. MANUFACTURER PART NUMBER (MPN): 6105-14 STOCK NUMBER: 6105-14 2.00 EA 0055 FASCIA PRESS, SHEEHY MANUFACTURER PART NUMBER (MPN): 6105-17 STOCK NUMBER: 6105-17 2.00 EA 0056 RETRACTOR WEITLANDER,CVD,BLUNT 4-1/8IN. MANUFACTURER PART NUMBER (MPN): 6106-10 STOCK NUMBER: 6106-10 4.00 EA 0057 SCISSORS, BELUCCI, MINI, FINE CVD LT MANUFACTURER PART NUMBER (MPN): 6107-04 STOCK NUMBER: 6107-04 2.00 EA 0058 SCISSORS, BELLUCCI, MINI, FINE CVD RT MANUFACTURER PART NUMBER (MPN): 6107-05 STOCK NUMBER: 6107-05 2.00 EA 0059 SCISSORS, BELLUCCI, MINI, VERY FINE, 4.5 MM MANUFACTURER PART NUMBER (MPN): 6107-06 STOCK NUMBER: 6107-06 2.00 EA 0060 SCISSORS, BELLUCI, MINI, FINE 8 MM MANUFACTURER PART NUMBER (MPN): 6107-10 STOCK NUMBER: 6107-10 2.00 EA 0061 SPECULA OVAL MANUFACTURER PART NUMBER (MPN): 6109-31E STOCK NUMBER: 6109-31E 2.00 EA 0062 SPECULA, OVAL, OBLIQ, BLACK, SIZE 2 MANUFACTURER PART NUMBER (MPN): 6109-32E STOCK NUMBER: 6109-32E 2.00 EA 0063 SPECULA, OVAL, OBLIQ, BLACK, SIZE 3 MANUFACTURER PART NUMBER (MPN): 6109-33e STOCK NUMBER: 6109-33E 2.00 EA 0064 SPECULA, OVAL, OBLIQ, BLACK, SIZE 4 MANUFACTURER PART NUMBER (MPN): 6109-34E STOCK NUMBER: 6109-34E 2.00 EA 0065 SPECULA, OVAL, OBLIQ, BLACK, SIZE 5 MANUFACTURER PART NUMBER (MPN): 6109-35E STOCK NUMBER: 6109-35E 2.00 EA 0066 SPECULA, OVAL, OBLIQ, BLACK, SIZE 6 MANUFACTURER PART NUMBER (MPN): 6109-36E STOCK NUMBER: 6109-36E 2.00 EA 0067 SPECULA, OVAL, OBLIQ, BLACK, SIZE 7 MANUFACTURER PART NUMBER (MPN): 6109-37E STOCK NUMBER: 6109-37E 2.00 EA 0068 SPECULA, OVAL, OBLIQ, BLACK, SIZE 8 MANUFACTURER PART NUMBER (MPN): 6109-38E STOCK NUMBER: 6109-38E 2.00 EA 0069 SPECULA, OVAL, OBLIQ, BLACK, SIZE 9 MANUFACTURER PART NUMBER (MPN): 6109-80E STOCK NUMBER: 6109-80E 2.00 EA 0070 SPECULA, OVAL, OBLIQ, BLACK, SIZE 10 MANUFACTURER PART NUMBER (MPN): 6109-81E STOCK NUMBER: 6109-81E 2.00 EA 0071 SPECULA, OVAL, OBLIQ, BLACK, SIZE 11 MANUFACTURER PART NUMBER (MPN): 6109-82E STOCK NUMBER: 6109-82E 2.00 EA 0072 SPECULUM, NASAL, BECKMAN MANUFACTURER PART NUMBER (MPN): 6109-84 STOCK NUMBER: 6109-84 2.00 EA 0073 SUCTION, IRRIGATOR, HOUSE, 2.5 FR MANUFACTURER PART NUMBER (MPN): 6110-56 STOCK NUMBER: 6110-56 10.00 EA 0074 SUCTION, IRRIGATOR, HOUSE, 4 FR MANUFACTURER PART NUMBER (MPN): 6110-58 STOCK NUMBER: 6110-58 10.00 EA 0075 SUCTION, IRRIGATOR, HOUSE, 5 FR MANUFACTURER PART NUMBER (MPN): 6110-60 STOCK NUMBER: 6110-60 10.00 EA 0076 SUCTION, IRRIGATOR, HOUSE, 7 FR MANUFACTURER PART NUMBER (MPN): 6110-61 STOCK NUMBER: 6110-61 10.00 EA 0077 SUCTION, IRRIGATOR, HOUSE 8 FR MANUFACTURER PART NUMBER (MPN): 6110-62 STOCK NUMBER: 6110-62 10.00 EA 0078 SUCTION, IRRIGATOR, HOUSE, 10 FR MANUFACTURER PART NUMBER (MPN): 6110-63 STOCK NUMBER: 6110-63 10.00 EA 0079 SUCTION, IRRIGATOR, HOUSE, 12 FR MANUFACTURER PART NUMBER (MPN): 6110-64 STOCK NUMBER: 6110-64 10.00 EA 0080 SUCTION, IRRIGATOR, HOUSE 14 FR MANUFACTURER PART NUMBER (MPN): 6110-65 STOCK NUMBER: 6110-65 10.00 EA 0081 KNIFE, FLAP, MCCABE DOUBLE ENDEDED MANUFACTURER PART NUMBER (MPN): 6204-80 STOCK NUMBER: 6204-80 2.00 EA 0082 EAR LOOP, BILLEAU, SMALL OVAL, 2MM MANUFACTURER PART NUMBER (MPN): 6214-02 STOCK NUMBER: 6214-02 2.00 EA 0083 HOOK, INCUS, ALLPORT 90 DEG. MANUFACTURER PART NUMBER (MPN): 6215-20 STOCK NUMBER: 6215-20 2.00 EA 0084 SUCTION,BARON,3FR MANUFACTURER PART NUMBER (MPN): 6222-10 STOCK NUMBER: 6222-10 100.00 EA 0085 SUCTION,BARON 5FR MANUFACTURER PART NUMBER (MPN): 6222-15 STOCK NUMBER: 6222-15 100.00 EA 0086 SUCTION,BARON,7FR MANUFACTURER PART NUMBER (MPN): 6222-20 STOCK NUMBER: 6222-20 100.00 EA 0087 SUCTION, SCHUKNECHT, 20 GA MANUFACTURER PART NUMBER (MPN): 6222-30 STOCK NUMBER: 6222-30 100.00 EA 0088 SUCTION TUBE,SCHUKNECHT,22GA STOCK NUMBER: 6222-31 100.00 EA 0089 SUCTION, SCHUKNECHT, 24 GA MANUFACTURER PART NUMBER (MPN): 6222-32 STOCK NUMBER: 6222-32 100.00 EA 0090 FORCEPS, CUPS, HARTMAN-HERZFELD 2.0 MM MANUFACTURER PART NUMBER (MPN): 6232-01 STOCK NUMBER: 6232-01 2.00 EA 0091 FORCEPS, CUPS, HARTMAN-HERZFELD 2.0 MM MANUFACTURER PART NUMBER (MPN): 6232-01 STOCK NUMBER: 6232-01 2.00 EA 0092 FORCEPS, CUP, HARTMAN-HERZFELD 3.0 MM MANUFACTURER PART NUMBER (MPN): 6232-04 STOCK NUMBER: 6232-04 2.00 EA 0093 FORCEPS, CUP, HARTMAN-HERZFELD 2.0 MM MANUFACTURER PART NUMBER (MPN): 3721007 STOCK NUMBER: 3721007 2.00 EA 0094 CURRETTE, DBL ENDED 2.5MM MANUFACTURER PART NUMBER (MPN): 6312-70 STOCK NUMBER: 6312-70 2.00 EA 0095 SPECULUM, NASAL, HARTMAN MANUFACTURER PART NUMBER (MPN): 6362-35 STOCK NUMBER: 6362-35 2.00 EA 0096 RETRACTOR, PERKINS, BLUNT, LT MANUFACTURER PART NUMBER (MPN): 6666-50 STOCK NUMBER: 6666-50 2.00 EA 0097 RETRACTOR, PERKINS, BLUNT, RT STOCK NUMBER: 6666-51 2.00 EA 0098 CUTTING BLOCK, HOUSE STOCK NUMBER: 6719-75 4.00 EA 0099 PICK, STAPES, GUILFORD-WRIGHT, BLUNT, 90 DEG STOCK NUMBER: NS3722024 2.00 EA 0100 CURETTE, HOUSE, DOUBLE ENDED 1.3 MM STOCK NUMBER: NS3722050-1 2.00 EA 3. Salient Characteristics: ALL SURGICAL INSTRUMENTS OFFERED MUST BE MADE OF SURGICAL GRADE STAINLESS STEEL FORGED IN EUROPE OR THE UNITED STATES ALL SURGICAL INSTRUMENTS OFFERED MUST BE ASSEMBLED IN A EUROPEAN NATION OR THE UNITED STATES SURGICAL INSTRUMENTS OFFERED FROM PAKISTAN, CHINA, AND/OR INDIA WILL NOT BE CONSIDERED. ALL SURGICAL INSTRUMENT PROPOSALS WILL BE SUBJECT TO TECHNICAL REVIEW AND SELECTION WILL BE BASED ON PAST PERFORMANCE AND QUALITY. VAMC CLEVELAND STERILE PROCESSING SERVICES REQUESTS THE FOLLOWING: ALL SURGICAL INSTRUMENTS ARE 2D MARKED WITH CENSITRAC MARKINGS. ALL INSTRUMENTS ARE ENTERED INTO THE CENSITRAC INSTRUMENT DATABASE FOR HOSPITAL ID # 1207 USING APPROVED VA NORMENCLATURE. PICTURES OF SURGICAL INSTRUMENTS ARE ALSO LOADED INTO THE CENSITRAC INSTRUMENT DATABASE. Specifications: MODEL # DESCRIPTION Total Quantity 0127-03 knife handle #3, for blades 10-15c, 5" (12.7 cm), no scale 4 0128-50 3k round knife handle, beaver-type, round knurled handle, for mini blades (series 50, 60, 70), 4" (10.2 cm) 2 0625-15 brown-adson tissue forceps, 4 3/4" (12.0 cm), straight tips, 9x9 teeth 2 0730-14 lucae bayonet dressing forceps, 5 1/2" (14.0 cm), standard pattern, serrated tips 2 1545-12 halsted mosquito forceps, standard pattern, 5" (12.7 cm), curved 8 1571-16 kelly forceps, curved, rankin, 6 1/4" 2 1757-79 non-perforating towel clamp, 4" (10.1 cm) 8 2005-09 senn retractor, double-ended, 6 3/8" (16.2 cm), blunt 4 20467-18 jamison (reynolds) tenotomy scissors, supercut, curved, 7" (17.8 cm) 2 2050-05 joseph double hook, 2 sharp prongs, 6 1/4" (15.9 cm), 5.0 mm wide 2 2218-21 u.s. army retractor, double-ended, set of 2, 8 1/4" (21.0 cm) 2 2426-20 schuknecht retractor, double curved arms, 3x3 sharp prongs, 5 1/8" (13.0 cm) 2 2635-03 freer elevator, double-ended, sharp & blunt blades, 7 1/2" (19.0 cm), 6.5 mm wide 2 3241-00 halsey needle holder, tungsten carbide, 5" (12.7 cm), serrated 2 3250-00 adson thumb forceps, tungsten carbide, dressing, serrated platform, 4 3/4" (12.1 cm) 2 3270-50 iris scissors, tungsten carbide, 4 1/2" (11.4 cm), curved 2 3270-60 iris scissors, tungsten carbide, 4 1/2" (11.4 cm), straight 2 3283-00 mayo scissors, tungsten carbide, beveled blades, straight, 6 3/4" (17.1 cm) 2 5002-15 allis tissue forceps, standard pattern, 4x5 teeth, 6" (15.2 cm) 4 5580-86 jacobson micro vascular scissors, flat handle, 7 1/2" (19.0 cm), straight blades 2 5580-87 jacobson micro vascular scissors, flat handle, 7 1/2" (19.0 cm), curved blades 2 6101-24 mcgee wire crimper, delicate 3.0 mm jaws, angled down, shaft 2 3/4" (72.0 mm), 5 1/4" (13.5 cm) 2 6101-32 bellucci ear forceps, 8.0 mm finely serrated jaws, shaft 3" (75.0 mm), 5 1/4" (13.5 cm) 2 6101-47 house miniature forceps, finely serrated, extra delicate jaws, 4.0 mm long jaws, 2 3/4" (7.0 cm) shaft 2 6101-47 house miniature forceps, finely serrated, extra delicate jaws, 4.0 mm long jaws, 2 3/4" (7.0 cm) shaft 2 6101-50 ear oval cup forceps, extra-fine, 0.9 mm x 2.0 mm cups, 2 3/4" shaft (70.0 mm), 5 1/4" (13.3 cm) overall 2 6101-52 house miniature ear forceps, 0.6 mm x 1.0 mm oval cups, 5 1/4" (13.5 cm), straight, 2 3/4" shaft (70.0 mm) 2 6101-57 house-dieters malleus nipper, shaft 3" (75.0 mm), 5" (12.5 cm), 2.0 mm jaws 2 6101-58 house-dieters malleus nipper, shaft 3" (75.0 mm), 5" (12.5 cm), 1.5 mm jaws 2 6103-01 austin duckbill knife elevator, 2.0 mm x 8.0 mm curved tip, 6 1/4" (16.0 cm) 2 6103-05 austin needle, 10.0 mm slightly curved tip, 6 1/4" (16.0 cm) 2 6103-08 austin pick, 6 1/4" (16.0 cm), 1.0 mm wide tip, tip angled 90 degrees 2 6103-09 austin attic dissector, 5.0mm, 90 degree right angle, 6 1/4" (15.8cm) 2 6103-10 austin strut caliper, markers 3.5 mm, 4.0 mm & 4.5 mm from tip, 6" (16.0 cm) 2 6103-12 austin sickle knife, 3.0mm, curved blade, 6 1/4" (16.0cm) 2 6103-23 guilford-wright drum elevator, 2.0 mm wide tip, 5 1/2" (14.0 cm) 2 6103-44 hough whirly-bird-style knife, 6" (15.0 cm), 1.0 mm x 5.0 mm blade, strong curve, #1, angled right 2 6103-45 hough whirly-bird-style knife, 6" (15.0 cm), 1.0 mm x 5.0 mm blade, strong curve, #2, angled left 2 6103-46 hough whirly-bird-style knife, 6" (15.0 cm), 0.5 mm x 5.0 mm blade, light curve, #3, angled right 2 6103-47 hough whirly-bird-style knife, 6" (15.0 cm), 0.5 mm x 5.0 mm blade, light curve, #4, andled left 2 6103-49 hough pick, straight tip, 6" (15.0 cm) 2 6103-59 house needle, malleable shaft, octagonal handle, curved tip, semi-sharp point, 6 5/8" (16.8 cm) 2 6103-73 house oval window pick, octagonal handle, angled 90 degrees, malleable medium shaft, 6 1/2" (16.5 cm), 0.33 mm long point 2 6103-76 house "gimmick" elevator, 1.0 mm x 12.0 mm tip angled at 15 degrees, octagonal handle, 6 1/2" (16.5 cm) 2 6103-77 house lancet knife, octagonal handle, 2.0 mm x 3.0 mm tapered tip, angled 45 degrees, known as "no. 2 knife", 6 1/2" (16.5 cm) 2 6103-81 house sheehy knife curette, malleable shaft, 6 1/2" (16.5 cm), "small weapon", 2.0 mm blade 2 6103-82 house-sheehy knife curette, malleable shaft, 6 1/2" (16.5 cm), "large weapon", 2.5 mm blade 2 6103-83 house oval window pick, octagonal handle, angled 30 degrees, malleable shaft, 6 1/2" (16.5 cm), 0.33 mm long point 2 6103-84 house oval window pick, octagonal handle, angled 30 degrees, malleable shaft, 6 1/2" (16.5 cm), 0.66 mm long point 2 6103-96 house incudostapedial joint knife, octagonal handle, 0.5 mm x 1.5 mm long blade, angled 20 degrees, 6 1/2" (16.5 cm) 2 6104-70 schuknecht roller knife, curved shaft, 7 1/2" (19.0 cm), 3.0 mm diameter roller blade in line w/ handle 2 6105-11 derlacki ossicle holding clamp, 1.0 mm teeth, 1.5 mm x 4.0 mm vertical groove & 1.5 mm x 2.0 mm horizontal groove, 4 3/4" (12.0 cm) 2 6105-14 lempert elevator, curved, heavy pattern, 7.0 mm, 7 1/4" (18.5 cm) 2 6105-17 sheehy fascia press, 23.0 mm x 31.0 mm plate, 7 1/2" (19.0 cm) 2 6106-10 baby weitlaner retractor, 3x3 blunt prongs, 4 1/2" (11.5 cm) 4 6107-04 bellucci alligator scissors, 7.0 mm blades, 3"(76.0 mm) shaft, 5 1/4"(13.5 cm), left curved blades 2 6107-05 bellucci alligator scissors, 7.0mm blades, 3"(76.0mm) shaft, 5 1/4"(13.5cm), right curved blades 2 6107-06 house-bellucci alligator scissors, 5.0 mm blades, 3" (76.0 mm) shaft, 5 1/4" (13.5 cm), straight 2 6107-10 bellucci alligator scissors, 7.0 mm blades, 3" (76.0 mm) shaft, 5 1/4" (13.5 cm), straight 2 6109-31E ebonized farrior ear speculum, oval, angled (oblique) end, # 3, 4.5 mm x 5.5 mm 2 6109-32E ebonized farrior ear speculum, oval, angled (oblique) end, # 4, 5.0 mm x 6.0 mm 2 6109-33E ebonized farrior ear speculum, oval, angled (oblique) end, # 5, 5.5 mm x 6.5 mm 2 6109-34E ebonized farrior ear speculum, oval, angled (oblique) end, # 6, 6.0 mm x 7.0 mm 2 6109-35E ebonized farrior ear speculum, oval, angled (oblique) end, # 7, 6.5 mm x 7.5 mm 2 6109-36E ebonized farrior ear speculum, oval, angled (oblique) end, # 8, 7.0 mm x 8.0 mm 2 6109-37E ebonized farrior ear speculum, oval, angled (oblique) end, # 9, 7.5 mm x 8.5 mm 2 6109-38E ebonized farrior ear speculum, oval, angled (oblique) end, # 9, 8.0 mm x 9.0 mm 2 6109-80E ebonized farrior ear speculum, oval, angled (oblique) end, # 1, 3.0 mm x 4.0 mm 2 6109-81E ebonized farrior ear speculum, oval, angled (oblique) end, # 1, 3.5 mm x 4.5 mm 2 6109-82E ebonized farrior ear speculum, oval, angled (oblique) end, # 2, 4.0 mm x 5.0 mm 2 6109-84 beckman nasal speculum, 22.0 mm blades on strongly curved shaft, 6" (15.0 cm) 2 6110-56 house suction-irrigation tube, 2.0 x 2.5 fr., 85.0 mm straight section 10 6110-58 house suction-irrigation tube, 2.5 x 4.0 fr., 95.0 mm straight section 10 6110-60 house suction-irrigation tube, 4.0 x 5.0 fr., 95.0 mm straight section 10 6110-61 house suction-irrigation tube, 5.0 x 7.0 fr., 95.0 mm straight section 10 6110-62 house suction-irrigation tube, 6.0 x 8.0 fr., 95.0 mm straight section 10 6110-63 house suction-irrigation tube, 7.0 x 10.0 fr., 95.0 mm straight section 10 6110-64 house suction-irrigation tube, 8.0 x 12.0 fr., 95.0 mm straight section 10 6110-65 house suction-irrigation tube, 12.0 x 14.0 fr., 95.0 mm straight section 10 6204-80 mccabe flap knife dissector, double-ended, 2.0 mm x 3.0 mm blades angled at 25 degrees & 45 degrees, 7 1/4" (18.5 cm) 2 6214-02 billeau flexible ear loop, 6 1/2" (16.5 cm), medium size, #2 2 6215-20 allport mastoid hook & searcher, 6 1/4" (16.0 cm) 2 6222-10 baron suction tube, 3" (7.6 cm) working, 5 1/8" (13.0 cm) overall, 3 fr, 1.0 mm 100 6222-15 baron suction tube, 3" (7.6 cm) working, 5 1/8" (13.0 cm) overall, 5 fr, 1.6 mm 100 6222-20 baron suction tube, 3" (7.6 cm) working, 5 1/8" (13.0 cm) overall, 7 fr, 2.3 mm 100 6222-30 schuknecht suction tube, 78.0 mm tube length, 4" overall length, 20 gauge 100 6222-31 schuknecht suction tube, 78.0 mm tube length, 4" overall length, 24 gauge 100 6222-32 schuknecht suction tube, 78.0 mm tube length, 4" overall length, 22 gauge 100 6232-01 hartman-herzfeld ear forceps, 6.0 mm jaws on 2 3/4" (71.0 mm) shaft, 5 1/4" (13.5 cm), straight jaws, 2.0 mm cup 2 6232-01 hartman-herzfeld ear forceps, 6.0 mm jaws on 2 3/4" (71.0 mm) shaft, 5 1/4" (13.5 cm), straight jaws, 2.0 mm cup 2 6232-04 hartman-herzfeld ear forceps, 6.0 mm jaws on 2 3/4" (71.0 mm) shaft, 5 1/4" (13.5 cm), straight jaws, 3.0 mm cup 2 6312-70 house curette, double-ended, flat handle, light angle, 2.0mm & 2.5mm oval cups, 7"(17.8 cm) 2 6362-35 halle nasal speculum, 35.0 mm blades, 6 1/4" (16.0 cm) 2 6666-50 perkins retractor, 3 sharp prongs (7.0 mm long) & solid blades (11.0 x 25.0 mm) w/ spikes, 80.0 mm inside spread, 5" (12.5 cm), 3 prongs on right 2 6666-51 perkins retractor, 3 sharp prongs (7.0 mm long) & solid blades (11.0 x 25.0 mm) w/ spikes, 80.0 mm inside spread, 5" (12.5 cm), 3 prongs on left 2 6719-75 cartilage cutting board, 85.0 mm x 55.0 mm x 10.0 mm 4 NS3722024 guilford-wright stapes pick 1.0 mm, blunt, 90 deg right angled, overall length 160 mm 2 NS3722050-1 house curettes 1.1 x 1.3 mm, strong angle, double ended, overall length 178 mm 2 CENSITRAC-APPLI SERVICE CHARGE for Censitrac application, per piece 772 4. Date(s) and place(s) of delivery and acceptance and FOB point: Delivery must be within 30 days ARO FOB: Destination Deliver to: Department of Veterans Affairs Cleveland VA Medical Center 10701 East Blvd. Cleveland, OH 44106 5. Applicable Provisions and Clauses: This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-94,2005-95. The following FAR and VAAR provisions and clauses are incorporate into this solicitation document by reference: 52.212-1, Instructions to Offerors-Commercial; 52.212-4, Contract Terms and Conditions- Commercial Items; 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders (of which 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.223-18, 52.225-1, 52.225-13, and 52.232-34 are applicable); VAAR 852.246-70, Guarantee, (fill in) one year or better; and 852.246-71, inspection. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. 52.212-2, Evaluation-Commercial Items, and VAAR 852.211-73 and Brand Name or Equal, is also incorporated into this solicitation. At minimum, the offered item must meet all product specifications/salient characteristics of the requested item and be compatible with using the requested items disposables to be considered a responsive offer. 6. Offeror Attachments: If an equal item is offered, the offeror must submit descriptive literature that conclusively establishes product equivalency and technical acceptability and compatibility at time of quote submission. IF THE OFFEROR IS NOT THE MANUFACTURER OF THE QUOTED ITEMS, THE OFFEROR SHALL SUBMIT WRITTEN EVIDENCE AT THE TIME OF QUOTE SUBMISSION THAT CLEARLY VERIFIES THEYARE AN AUTHORIZED DISTRIBUTOR AND/OR RESELLER OF THE QUOTED PRODUCTS and will provide the items on or before the specified delivery date. 7. Offer Evaluation and Award. This is a competitive Request for Quotations (RFQ) that will be evaluated under FAR Part 6 and 12. The Government will issue a Firm-Fixed Price Purchase Order resulting from this solicitation to the responsible offeror whose offer conforms to the requirements within this solicitation and will be the most advantageous to the Government, price and other factors considered. The following factors will be used to evaluate offers: Technical (capability of offer to meet the Government s needs) Delivery/Installation Availability Price An Offeror s initial quote should contain the best terms from a price and technical standpoint. Offerors are reminded that representatives from your company SHALL NOT contact any Cleveland VAMC personnel to discuss this RFQ during the solicitation and evaluation process. RESPONSES ARE DUE: Tuesday, August 29, 2017 at 5PM EST. Offers will only be accepted electronically via e-mail to rachelle.hamer@va.gov. Enter RFQ VA250-17-Q-1083 Surgical Instrument in the email subject line.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/VA/BreVAMC/VAMCCO80220/VA25017Q1083/listing.html)
 

Document(s)

Attachment
 

File Name: VA250-17-Q-1083 VA250-17-Q-1083.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3748041&FileName=VA250-17-Q-1083-000.docx)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3748041&FileName=VA250-17-Q-1083-000.docx

 

Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 

Place of Performance

Address: Louis Stokes Cleveland VAMC;10701 East Blvd.;Cleveland

Zip Code: OH
 

Record

SN04641612-W 20170824/170822233043-06003338d9e26d7102bcb1e2d82254a5 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |