SOURCES SOUGHT
59 -- Sources Sought for the Acquisition of C-12712A/A, Control Unit, Navigation Set
- Notice Date
- 8/23/2017
- Notice Type
- Sources Sought
- NAICS
- 334511
— Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing
- Contracting Office
- Department of the Army, Army Contracting Command, ACC - APG (W15P7T) Division B, 6001 COMBAT DRIVE, Aberdeen Proving Ground, Maryland, 21005-1846, United States
- ZIP Code
- 21005-1846
- Solicitation Number
- MARKET-SURVEY-6228-1
- Archive Date
- 10/5/2017
- Point of Contact
- Wai Louie, Phone: (443) 395-1267, Brad Holtzapple,
- E-Mail Address
-
wai.c.louie.civ@mail.mil, dla.apgmr@dla.mil
(wai.c.louie.civ@mail.mil, dla.apgmr@dla.mil)
- Small Business Set-Aside
- N/A
- Description
- This is a Market Survey to locate sources for the acquisition of Control Unit, C-12712A/A, NSN 6605-15-012-8776, P/N 765200-200. The CU provides the command and control of the CN-1716A/A, Attitude and Heading Unit (AHRU), NSN 6605-15-012-8777 and the interface with the avionics suite. The AHRU is a self-contained strap-down, inertial reference set that provide pitch, roll, and magnetic heading, angular rate and body acceleration information to the flight instruments on the UH-60A/L Black Hawk helicopter. The AHRU senses pitch (±82°), roll (360°) and heading (360°), and transmits all attitude information in synchro format. Attitude information shall also be available in both digital and analog form. The operation of the AHRU shall be such that it shall function in a magnetically slaved (Slaved) mode, a latitude-corrected free directional gyro (Free) mode and a self-contained compass calibration (CAL) mode. This item was produced sole source by Northrop Grumman Italia (NGI), Via Pontina km 27,800, 00040 Pomezia, Italy, CAGE A3379. Item contain hardware and software proprietary to NGI. Detailed technical data for these units are not available from the Army, except for performance specification. Any sources capable of produce these items must so indicate, by writing to Commander, USACERDEC, ATTN: RDER-PRA-AB, Building 6007, 3rd Floor, F3-140-90, Aberdeen Proving Ground, MD 21005. Companies must demonstrate that they had past experience of produce and repair this system. The lead time requirement for produce the C-12712A/A is 8 months from the Date of the Contract. The response must demonstrate intimate knowledge of the systems including areas such as system design, production capability, test and fault isolation, repair and product acceptance processes, projected parts/materials usage and the necessary special test equipment. The response should state that whether the supplier received Airworthiness Release for this item. Successful supplier is require to warrant that the item will satisfactorily perform when used for the purpose intended by the Army. For more information contact Wai Louie, (443)395-1267, Email Address: wai.c.louie.civ@mail.mil. The deadline for response is September 20, 2017. Please complete the following questions when respond. If a question does not apply, please enter N/A or non-applicable. 1) Provide a brief summary of the company and its core competencies. 2) Please provide the following Point of Contact information on all responses: a. Company: Address: Point of Contact: Phone Number: Fax Numbers: Email Address: CAGE Code: DUNS Number: 3) Describe your Company's past performance in the manufacturing and/or supplying of C-12712A/A in the past. Provide Contract Number, Point of Contact (POC), e-mail address, phone number, and a brief description of your direct support of the effort. 4) Describe the qualifications of your engineering staff, who have experience in the design and production of application similar in complexity and technology as the three items. 5) Describe your company's experience in identifying the test equipment for components similar in complexity and technology to what is used in the description. 6) Describe your company's experience in managing obsolescence issues. 7) Does your company maintain a Program and Assessment Tool to monitor and analyze the availability of components to allow clear and precise tracking of all obsolescence issues? If so, please elaborate on the Program and Assessment tool(s). 8) Describe your company's experience in identifying the alternatives for the unavailability of obsolete materials or components to mitigate obsolescence issues. 9) Discuss your company's capability in meeting US Government contracting delivery requirements. 10) Do you have product/s or keep products in stock? This Request for Information (RFI) is for planning and market research purposes only, and shall not be construed as a commitment by the Government. The information gathered from this announcement will be used to determine if responsible sources exist, and to assist in determining if this effort can be competitive and/or set aside for Small Business. Furthermore, the Government will use the information, in part, to determine the best acquisition strategy for a potential procurement action and to assist in making future acquisition strategy decisions. This is NOT a Request for Quote or Proposal. The Government does not intend to award a contract on the basis of this RFI or reimburse any costs associated with the preparation of responses to this RFI.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/d784a38466ddddbd78c6e487a4f2bf98)
- Record
- SN04643387-W 20170825/170823233505-d784a38466ddddbd78c6e487a4f2bf98 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |